APATOR smartESOX pro 3 Phase Electricity Meter User Guide
- June 13, 2024
- APATOR
Table of Contents
APATOR smartESOX pro 3 Phase Electricity Meter
Product Information
The smartESOX pro is a three-phase electricity meter designed for high-power photovoltaic installations that operate in the power grid. It is specifically designed to enable the settlement of prosumers using the net energy metering (NEM) method. The meter issuitable for use in autonomous or stand-alone installations.
Key Features
- Measurement of active, reactive, and apparent energy
- Measurement of instantaneous, maximum, redundant, and cumulative power
- Measurement of network parameters, including voltages, currents, voltage and current harmonics, frequencies, THD, asymmetry factor, and neutral wire current
- Monitoring of power grid parameters such as voltage dips and swells, long power outages, current and voltage asymmetry, current flow with no applied voltage, no current flow, and exceeded current limit
- Direct, semi-direct, and indirect connection through current transformers (CT), optionally also through voltage transformers (VT)
- Recording of energy in six tariff zones, switched by a built-in real-time clock
- Wide range of recording capabilities for measured parameters with independently configurable profiles and different recording intervals
- Enhanced event logging with 7 groups of events recorded in independent logs
- Three built-in communication ports: one optical and two serial
- Interchangeable communication module: 3G/GPRS or Ethernet
- Built-in emergency power supply connected to an external power source
- Ability to read energy registers on the display in case of power outage powered by a replaceable AA battery
- Ability to read profiles and reference periods on the LCD display
Application
smartESOX pro for RES is a three-phase elec- tricity meter designed for high- power photovol- taic installations that operate in the power grid, ensuring the settlement of prosumers using the net energy metering (NEM) method. The meter works well in autonomous or stand-alone instal- lations.
Functionality
- Measurement of active, reactive and apparent energy
- Measurement of instantaneous, maximum, redundant and cumulative power
- Measurement of transformer losses: OLA, NLA, OLR, NLR, I²t, U²t
- Measurement of network parameters, including: voltages, currents, voltage and current harmonics, frequencies, THD, assymetry factor and neutral wire current
- Monitoring of power grid parameters: voltage dips and swells; long power outages; current and voltage asymmetry; current flow with no applied voltage; no current flow; exceeded current limit
- Direct, semi-direct and indirect connection through current transformers, optionally also through voltage transformers
- Recording of energy in six tariff zones, switched by a built-in real time clock
- Wide range of recording capabilities for measured parameters:
- independently configurable profiles with different recording intervals
- ability to configure a different set of recorded data for each profile
- Enhanced event logging
- 7 groups of events, recorded in independent logs
- Sending immediate event notifications to the host device/system
- Wide range of recording capabilities for measured parameters in reference periods
- Up to 50 parameters recorded in reference periods
- DLMS/COSEM communication protocol, possibility to read measurement data through the PN-EN 62056-21 (IEC1107) protocol
- Three built-in communication ports: one optical, two serial
- Interchangeable communication module: 3G/GPRS or Ethernet
- Built-in emergency power supply connected to an external power source
- Ability to read energy registers on the display in case of power outage – powered by a replaceable AA battery.
- Ability to read profiles and reference periods on the LCD
Do you know that…
ESOX means a PIKE in Latin: commonly considered to be a long-living fish.
Basic technical parameters
Model | smartESOX pro | |
---|---|---|
Connection method | CT or CT/VT connected | |
Rated voltage Un | [V] | 3 x 58/100…3×230/400 |
Reference current Iref | [A] | 1 or 5 |
Maximum current Imax | [A] | 6 |
Measurement accuracy of active energy | class 0.2 S (EN 62053-22), class C |
(EN 50470-3)
Measurement accuracy of reactive energy| | class 2 (EN 62053-23), class 0.5%
Electric strength| [kV]| 4 (AC 50 Hz), 6 or 8 – optional (surges 1,2/50 μs)
Pulse frequency| [imp/kWh] [imp/kvarh]| 20 000
Clock| | Internal, accuracy of at least 0.5 s/24 h at 23˚C, synchronised by
an external signal or communication port.
Communication
| | DLMS/COSEM (PN-EN 62056-5-3, PN-EN 62056-6-2) protocol support
Reading of data through serial ports with PN-EN 62056-21 (IEC1107) protocol Ports:
• Optical port (PN-EN 62056-21), speed up to 19200 Bd
• Two independent serial ports (2x RS-485 lub 1x RS-485 i 1xRS-232), speed from 300 Bd to 57600 Bd
• Interchangeable communication module: 3G/GPRS or Ethernet
Inputs| | Two optically isolated inputs (features: recording, tariff and real
time clock synchronisation control; alarm input; impulse).
Outputs| | Up to six impulse outputs (for measured energy). Two programmable
relay outputs.
Event logging
| | Logging of events related to illegal power consumption, the contractor, change of firmware, energy quality, functioning of interfaces, clock management, power outages along
with time and date of the event.
Display| | Segment display compliant with VDEW requirements.
Operating temperature| | from −40˚C to 70˚C
Housing| | IP 54, II protection class
Standards
| | PN-EN 50470-1
PN-EN 50470-3
PN-EN 62053-22
PN-EN 62053-23
PN-EN 62053-11
This publication has been made exclusively for information purposes and shall not constitute an offer under the civil law. The designs are presented as an example; functions of the meter can be customised. 2022.055
Apator SA
- address: Apator 5.A. Centrum, Ostaszewo 57C, 87-148 tysomice, PL
- tel. +48 56 61 91 111, fax +48 56 61 91 295
- e-mail: apator@apator.com
- WEBB: www.apator.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>