CIRYCASE J49 Bluetooth Car Adapter User Manual

CIRYCASE J49 Bluetooth Car Adapter

Features

1. Pair with mobile phone/MP3/Tablet, etc., and turn your old car stereo/home stereo/3.5mm wired headphones Into wireless.
2. Atomically connects to the last connected device.
3. Keep pairing with 2 Bluetooth devices at the same time.
4. The built-In microphone can be used to answer hands-free calls.
5. The latest noise congelation technology provides excellent call quality.
6. The built-in battery has a battery life of up to 12 hours.
7. Compatible with 10S and Android devices.
8. Bluetooth V5.3 with low power consumption.

Specifications

Bluetooth Version: V5.3
Frequency Range: 2.4GHz
Output Power Category: Class2
Bluetooth Mode: HFP/HSP/A2DP/AVRCP
Range: up to 10 meters/33ft
Battery: 250mAh
Working currant: 10-2DmA
Charge Voltage: DC 5V
Charge Current: 15DmA

Product Diagram

Charge the Device

1. Please ensure that you fully charge the product before its first use. While charging, the display will flash to indicate the device is charging, and it will show 1 DD once charging is complete
2. When the device is in a low power state, the indicator light will flash red, please charge It with a DC 5V power supply input only. (Do not use a power supply higher than SV)

Note:

1. To maintain the health of the battery, please charge the product et least once
   aviary month when not using it for a long time.
   2. To endure the battery’s lifespan, avoid playing music while charging.

Pair with your Bluetooth-enabled smartphones, tablets, etc.

1. Power on the receiver, the indicator light flaps hear red and blue alternant, which means it’s in pairing mode.
   

2. Turn on the Bluetooth function of your smart device, search for” J49″ and connect.
   

3. Connacht that product to the AUX INPUT port of your desired source, like a headphone/home speaker or car stereo system with provided 3.5mm metal adapter or AUX cable, or plug your old 3.5mmwired earphone into the device.
   

4. Now you can enjoy music wirelessly or answer hands-free calls.

Pair with second smartphones, tablets, etc.

1. After successfully pairing with the first smart pharm, tum off the Bluetooth func11on of the first smartphone, and the product will enter the pairing mode again.

2. Turn on the Bluelooth function of the second smartphone, search for ‘J49’ and connect.
   

3. Turn on the Bluetooth function of the first smartphone, and select ‘J49’ in your pairing history.

4. Now. two smartphone as have connected ta the recelv11r at the same time.

Instructions

LED Indicator

Auto-Connect

The product will automatically pair with the last connected device when next to med on. (Before taming on the Bluetooth receiver, turn on the Bluetooth of your smart device.

Auto Power Off:

The product will power oft automatically If not paired with any device In 5 minutes

Trouble Shooting:

Q1: The product can’t pair with your Bluetooth-enabled phone, MP3, etc.

1. Please make sure you have powered on the receiver, and the indicator light flashes red and blue alternately.
2. Clear the paring list of your Bluetooth-enabled phone, MP3, etc. then try again.

Q2: The range of Bluetooth or the sound quality is not good.

The Bluetooth signal can be blocked by surrounding objects and reduce the audio quality, please put the right position without a barrier between the adapter and your phone (or other devices).

Packing List:

Bluetooth Receiver• 1
3.5mm Male to Male Connector• 1
3.5mmAudio Cable” 1
Type-C Charging Cable• 1
User Manual• 1

FCC Compliance Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a class B digital device, under Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wi ll not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be placed or operated in conjunction with any other antenna or transmitter.

Correct Disposal of This Product:

 Waste Electrical & Electronic Equipment) A This marking shown on the product or its literature indicates – that it should not be disposed of with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact the retailer where they purchased this product or their local government office for details of where and how they can take this product for environmentally friend ly recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for dispose.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>