maxell TW185B Mini True Wireless Earbuds User Manual

June 14, 2024
Maxell

maxell TW185B Mini True Wireless Earbuds

Specification:

  • Batterv capacity : Earbuds – (60mAh) Case – (400mAh)
  • Working Voltage and Ampere: 3.N-, 1 0mA
  • Earbud: fully charge for 50 minutes
  • Charging Case: fully charge for 2 hours
  • Play/Call Time : about 6 hours for earbuds and 24 hours with charging case
  • Driver Size : 10mm
  • Sensitivity : 9BdB+/-3dB
  • Impedance: 16Ohms
  • Bluetooth Version : 5.0 (Distance 10 meters

maxell TW185B Mini True Wireless Earbuds 1

Charging the case:
To charge the case plug in the type c cord and connect into a computer or wall charger. When fully charged the battery life indicator will read 100%  takes about 5-2hours.

Charging the earbuds:
Place the earbuds in the charger. The earbud LEDS will bea solid red when charging. The LEDS will turn off when the carefully charged takes about 50 minutes- 1 hour.

maxell TW185B Mini True Wireless Earbuds 2

  1. Power on
    The earbuds will automatically turn on, once removed from the case.

  2. Poweroff
    Earbuds will automatically tum off, once you put them back into the case.

  3. Pairing ii new device:
    Remove the earbuds from the case, then place earbuds backinto the case. Remove again this will automictically turn the earbuds on. The flashing red and blue LEDS indicate that you are now in pairing mode. You will hear a voice prompt saying

    • Pairing
    • Now go to your Bluetooth device list and select to get connected. You will hear another voice prompt saying
    • connected: None to pair again, your Bluetooth device will automatically connect to the earbuds during future use.
  4. Earbud controls:

    • Pause/Play Music: Short press the power button on either bud once.
    • Volume+: Long press the power button on the Left bud for 2 seconds.
    • Volume-: Long press the power button on the Right Bud for 2 seconds.
    • New Track: Double press the power button on the Right Bud.
    • Previous Track: Double press the power button on Left Bud.
    • Take and End call: Press the power button on either bud once.
    • Reject a C.all: Press the power button on either bud twice. Once rejected your music will automatically resume.
  5. Solo
    You can use either bud separate in solo mode, just in case you want to hear and be aware of your surroundings(ex:whiledriving).Just placeeitherearbud backinto thecaseandthat earbud willturnoff. Theotherearbudwillremainon.

WARRANTY INFORMATION:

Maxell warrants this product to be free from all defects for a period of90 days from the date of original purchase. This Warranty does notapplyto normal wear or damage due to accident abnonnal use, misuseor neglect. ThisWarrantyonlyapplies topersonaland individual useofthe productandnotfor commercial, institutional or any other use. Any defective item will be replaced, at no charge, upon reasonable confinnation by Maxell of its defective condition, if returned with proof of purchase to an authorized Maxell dealer or directly to Maxell Warranty Replacement, 3 Garret Mountain Plaza, Suite 300, Woodland Park, New Jersey 07424. Neither Maxell nor any authorized Maxell dealer shall be liable for consequential damages arising from this Warranty, unless otherwise provided by law.

FCC INFORMATION:

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged  to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • lncrease the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio technician for help.

CAUTION : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
    The device has been evaluated to meet general RF exposure requirement.The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals