DEPSTECH DS700 7 Inch IPS Industrial Endoscope User Manual

: June 14, 2024
: DEPSTECH

Industrial Endoscope

DS700

Multi-Language User Manual

Product Features

DEPSTECH is an S &T company with robust development status. It is specialized in manufacturing of various endoscopes to improve your working efficiency.

DS700 is a high-performance industrial endoscope, equipped with 7 inch IPS high-definition display has the camera and video functions and saves into TF memory card (Micro-SD card).
DS700 is also fitted with microphone and loudspeaker to bring clearer audio and video effect.
It is also designed with 5,200mA ultra-large capacity battery to ensure long endurance and premium experience.
High-performance CMOS chip, supporting record high frame rate, obtaining clear images with Bluart 3.0 technology, widely used in industrial maintenance, home appliance repair, machinery repair and design, etc.

Safety and Protection

Probe of camera is an electronic device of high precision, so please do not hit the probe of camera or pull the cables, which may lead to failure of the device.
With IP67 waterproof layer, the probe shall be used with extra care and protected from scratches!
Camera probe is made from materials that are not high temperature resistant, so make sure the internal temperature of any internal combustion engine or other equipment whose internal temperature is higher has been cooled when they are examined, otherwise the device will be directly damaged!
In case of device damaged, please do not dismantle it by yourself, but contact the seller or the supplier for more professional maintenance services.
Children may not use this device independently without the guidance of adults.

Operating and Storage Environments

The device should be operated at an ambient temperature of 32~113ºF(0~45ºC).
The device should be stored in a dry, clean, oil-free and waterless place without any chemical liquid.

Product Introduction

(1)

Hold this button for 2s to power on/off the endoscope

(2)

Single press to take a photo or end the video record
Hold this button for 2s to start a video record

(3)

Click to switch main/side camera

(4)

Click to rotate the real-time image 180°
Click the button in main menu to return to the menu of last level

(5)

Click to enter the menu

(6)

Hold this button for 2s to enter/exit the album
Click to confirm the selections(When in the menu)

(7)

Click the button to adjust the brightness of lens module LED light
Move the cursor up(In the menu)

(8)

Click the button and the preview interface will be enlarged circularly
Move the cursor down(When in the menu)

(9)

Air plug interface

(10) Charging Status LED Indicator

Red LED indicator flashes: Charging
Red LED indicator stays on: Charging finished

(11) TF Card Slot

Support up to 32G TF card
Please format it on first use

(12) Type-C Charging Port

For charging (Type-C cable connected to the adapter)
For data transmission (Type-C cable connected to PC client)

(13) Reset Button

Short click the reset button to shut down the device.

(14) Alloy rack of endoscope

UI Introduction

Photo Shoot/ Video Record
Screen Rotation 180°
Battery Power
TF Card Status
(A) Main Lens
(B) Side Lens
(C) Side Lens
Timestamp

Tips!
Dual Lens: A:Main Lens B:Side Lens
Three Lens: A:Main Lens B:Side Lens(B) C:Side Lens(C)

File number
File Size
Resolution
Current playback duration / Total video duration
Photography date

Language Setting

Default language of the device is English; If other language is required, please follow the steps below:

Click the button to enter menu interface, select Language by pressing the / arrow button and then press the button, enter the language setting interface.
Click / button to select the language you need, and then press button to switch the language.
Click the button to return the Main Interface.

DEPSTECH DS700 7 Inch IPS Industrial Endoscope 7

Photo/Video

Take photos by pressing button.
Long press to start a video recording, single press to the end video recording.

View Photo/Video

1. Long press in preview mode to enter the photo album.
2. Press / to view photos, Click to play videos.
3. Long press to exit the photo album.

DEPSTECH DS700 7 Inch IPS Industrial Endoscope 9

Delete Photo/Video

When viewing photos/videos, press to enter the photo/video detail page.
Press / to choose to delete the current file or all files.

DEPSTECH DS700 7 Inch IPS Industrial Endoscope 10

Lens Switching

When the product is turned on, it opens the main lens by default, Click to the button can switch the lens (A→B→C→AB→AC→A).

DEPSTECH DS700 7 Inch IPS Industrial Endoscope 11

TF Card Formatting

On the preview interface, press the button to enter the menu;
Press / to select “Format” options;
Press to enter the option interface, Select “OK” ;
Wait for the formatting to complete.

DEPSTECH DS700 7 Inch IPS Industrial Endoscope 12

Copy Photo And Video Files To Computer

1. Use a TF card reader to copy data directly.

2. Use a Type-C cable to connect to computer.

Please connect the product to your computer.
Select “Data transmission”.

Charging Instructions

Connect the device to the DC 5V adapter for charging;
The red indicator light flashes when the device is charging, and is always on when fully charged.

Guide For Accessories Installation

Please note that the positioning wire on the end of the connector needs to be aligned with the red dot on the device connector in order to be inserted. Then turn the aluminum ring clockwise to tighten it.

Installation method:

Turn counterclockwise-remove protect cap

Turn clockwise-tighten accessories

Specifications

Model

|

DS700 Triple Camera

---|---

Camera Diameter

| 7.9 mm (0.31 in)
Best Focal Range|

A: 3-10 cm (1.18-3.93 in)
B: 2-6 cm (0.79-2.36 in)
C: 1.5-2.5 cm (0.59-0.98 in)

Camera View

| 80°
Screen Spec|

7” IPS Screen

Photo Resolution

| 1920*1080
Video Spec|

1080 p / 30 fps

Battery Life

| 3-4 H
Charging Time|

3-4 H

Charging Voltage and current

|

DC 5V/2A

Packing List

Endoscope
(32G TF card inserted)

| User Manual
---|---
|

Type-C Charging Cable

| Accessories
|

※ FCC Requirement: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

※ CE compliance: This device complies with EN 60065 standard, which means this device will not do harm to the user or products as following situations: 1)Electric shock 2)High temperature 3)Radiation 4)Explosion from inner 5)Mechanical Harm 6)Fire Hazard 7)Chemical burns.

※ EU Conformity Statement: This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EC, the RoHS Directive 2011/65/EU and Amendment (EU) 2015/863.

※ WEEE Notice: 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

※ 2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info

EC REP 1: Like Sun GmbH. Planckstr.59, 45147 Essen, Germany
EC REP 2: DST Co., Ltd. Fifth Floor 3 Gower Street, London, WC1E 6HA, UK

Customer Services

Please contact us if you have any questions, we love to hear from you

www.depstech.com
support@depstech.com

Facebook Official Page: @DEPSTECH. FANS

Shenzhen Deepsea Innovation Technology Co., Ltd.
Room 1901-1902, Jinqizhigu Building, No.1 Tangling Road, Nanshan District, 518055, Shenzhen, CN

Made in China

V02.23.04