HmIP-BRA-A Homematic IP Button Rocker Instruction Manual
- June 13, 2024
- Homematic IP
Table of Contents
HmIP-BRA-A Homematic IP Button Rocker
Product Information
The HmIP-BRA-A is a Homematic IP Button Rocker for brand switch systems. It can be easily clicked to a Homematic IP actuator, such as a switch actuator or blind actuator, to control the actuator via the pushbutton rocker. The package includes a rocker (with arrows) in anthracite color, an adapter, a clip-on frame, and a user manual.
Device Overview:
- (A) Clip-on frame
- (B) Adapter
- (C) Push-button rocker
- (D) Button 1 (e.g. on/higher/up, depending on the Homematic IP actuator)
- (E) Button 2 (e.g. off/darker/down, depending on the Homematic IP actuator)
Technical Specifications:
- Short designation: HmIP-BRA-A
- Operating temperature:
- Dimensions (W x H x D): 86 x 86 x 16 mm
- Weight: 45 g
Product Usage Instructions
Mounting
Before proceeding with the mounting, please read the installation instructions and the hazard and safety instructions in the user manual of the respective wireless actuator.
To install the button rocker and the clip-on frame, follow these steps:
- Ensure that the power to the actuator is turned off.
- Remove any existing frame from the switch socket.
- Insert the adapter into the push-button rocker.
- Align the clip-on frame with the switch socket and securely attach it.
- Click the push-button rocker onto the adapter.
- Turn on the power to the actuator and test the functionality of the button rocker.
Note: If you wish to mount the button rocker into frames of other manufacturers, please refer to the specific instructions provided by the manufacturer.
Maintenance and Cleaning
Regularly clean the button rocker and clip-on frame using a soft, dry
cloth. Do not use any abrasive or corrosive cleaning agents as they may damage
the surfaces.
Information about this manual
Please read this manual carefully before beginning operation with your
Homematic IP component. Keep the manual so you can refer to it at a later date
if you need to.
If you hand over the device to other persons for use,please hand over this
manual as well.
Symbols used:
Attention!
This indicates a hazard.
Please note:
This section contains important additional information.
Function and device overview
The Homematic IP Button Rocker for brand switch systems can simply be clicked
to a Homematic IP actuator (e.g. switch actuator or blind actuator for brand
switch systems) to switch the actuator via the pushbutton rocker.
Installation is very easy thanks to the adapter that is already inserted into
the push-button rocker and the design customised to Homematic IP actuators.
Due to the push-button design in the dimension of 55 mm, also most popular brand manufacturers can be integrated as an alternative to the enclosed removable frame.
Device overview
(see figure 1):
- (A) Clip-on frame
- (B) Adapter
- (C) Push-button rocker
- (D) Button 1 (e.g. on/higher/up, depending on the Homematic IP actuator)
- (E) Button 2 (e.g. off/darker/down, depending on the Homematic IP actuator)
Mounting
In parallel to this mounting instruction, please also refer to the installation instructions as well as hazard and safety instructions in the user manual of the respective wireless actuator.
To install the button rocker and the clip-on frame, please proceed as follows:
-
Place the clip-on frame (A) onto the installed
Homematic IP actuator (see fig. 2). Alternatively, you can continue using the existing frame with an inner dimension of 55 mm (see “4 Mounting into frames of other manufacturers” on page 12). -
Place the push-button rocker (C) with the already inserted adapter (B) into the clip-on frame, so that both latching lugs fit into the existing elongated holes (see figure 3).
Mounting into frames of other manufacturers
An over of compatible frames of other manufacturers can be found in the download area at www.homematic-ip.com
Maintenance and cleaning
The button rocker is maintenance-free. Enlist the help of an expert to carry
out any maintenance.
Clean the device using a soft, lint-free cloth that is clean and dry. You may
dampen the cloth a little with lukewarm water in order to remove more stubborn
marks. Make sure that no moisture will ingress into the actuator. Do not use
any detergents containing solvents, as they could corrode the plastic housing
and label.
Technical specifications
- Short description: HmIP-BRA-A
- Ambient temperature: 5 to 35 °C
- Dimensions (W x H x D): 86 x 86 x 16 mm
- Weight: 45 g
Subject to technical changes.
Instructions for disposal
Do not dispose of the device with regular domestic waste! Electronic equipment
must be disposed of at local collection points for waste electronic equipment
in compliance with the Waste Electrical and Electronic Equipment Directive.
Information about conformity
The CE sign is a free trading sign addressed exclusively to the authorities
and does not include any warranty of any properties.
For technical support, please contact your retailer.
Kostenloser Download der Homematic IP App!
Free download of the Homematic IP app!
Bevollmächtigter des Herstellers:Manufacturer’s authorised representative
eQ-3 AGMaiburger Straße 2926789 Leer / GERMANYwww.eQ-3.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>