recozy light 1401 Monk Table Lamp User Manual
- June 17, 2024
- recozy light
Table of Contents
recozy light 1401 Monk Table Lamp
Specifications
- Item: Monk Table Lamp
- Item Numbers: 1401 & 1413
- Light Bulb: LED E14
- Lamp Socket: E14
- Protection Class: IP 20
- Light Color: 2200-2700 K
- Luminous Flux: 470 lm
- Input: Max. 6 W
- Voltage: 230 V
- Burning Period: Approx. 25,000 hours
Explanation of Symbols
Introduction
Congratulations, and thank you for purchasing your new Recozy luminaire.
The instruction manual is included with this product and contains important
information regarding safety, usage, and disposal. Please take the time to
familiarise yourself with all operating and safety instructions before using
the product. Only use the product as described and for its intended purposes.
When passing the product on to others, please provide all relevant documents.
Before using the product, ensure the correct voltage and all parts are
assembled correctly.
Intended Usage
This luminaire is suitable for indoor use only in dry and enclosed rooms.
This device is intended for use in private households only and is unsuitable
for commercial or industrial use. Please note that this product is designed
for regular operation and should not be used in any way that exceeds its
intended purpose or specifications.
Scope of Delivery:
Upon receiving your package, immediately check the contents to ensure all
components are included and in proper condition. The following components are
included in this pa-ckage:
- 1 table lamp
- 1 LED light bulb (already installed)
- 1 Instruction manual
Monk
Table lamp
Item number: 1401 & 1413
Technical data
- Light bulb: LED E14
- Lamp socket: E14
- Protection class: IP 20
- Light colour: 2200-2700 K Luminous flux: 470 lm
- Input: (max.) 6 W
- Voltage: 230 V
- Burning period: about 25.000 hours
Product features
- Monk – (Item number 1401) Dimensions:
- Height 23,5 cm, Ø 19 cm
- Monk Plus – (Item number 1413) Dimensions:
- Height 30,9 cm, Ø 19 cm
- Textile cable
- Length:
- 1,5 m
- Diameter:
- ø 6 mm
- Dimming:
- Gradual dimming (100 %, 55 %, 15 %)
Description
- Light bulb
- Toggle switch
- Power plug
- Diffusor / Lampshade
- Tool for diffusor removal
Safety
Safety instructions
In case of damages caused by disregarding this operating manual, the warranty
claim will be void. No liability is accepted for consequential damages. No
liability is accepted for property damage or personal injury caused by
improper handling or failure to observe the safety instructions.
Risk of injury or death for infants and children! Never leave children
unsupervised with packaging material. There is a risk of suffocation caused by
packaging material. Children often underestimate the dangers.
Children aged 8 and above can use this device, and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they are supervised or instructed in the safe use of the device and understand the resulting dangers. Children are not allowed to play with the device. Children must only carry out cleaning and user maintenance with supervision.
Risk of injury! Do not leave the lamp or packaging carelessly lying around.
Plastic films, plastic parts, etc., could become dangerous toys for children.
Avoid the risk of electric shock. If the lamp is exposed to solid
disturbances, it may result in impairments from which it will recover
independently. Before connecting the luminaire to the power supply, check the
power plug for any damage. Never use the luminaire if you notice any damage.
Contact the service address or an electrician in case of damage, repairs or
other problems with the lamp.
WARNING: Avoid contact of the luminaire with water or other liquids. Never open any electrical components (such as switch, socket, etc.) or insert any objects into them. Such interferences pose a risk of electric shock.
- Only hold the insulated area of the power plug when connecting or disconnecting from the power source! To prevent hazards, any damaged outer flexible cable of this lamp must be replaced exclusively by the manufacturer, its service representative, or a comparable specialist.
- Before use, ensure that the existing power voltage matches the required operating voltage of the luminaire (see „Technical Data“).
Always disconnect the power plug before installing, disassembling, cleaning, or if you‘re not going to use the luminaire for a while. Do not install the luminaire on damp or con-ductive surfaces.
Use bulbs only in a dry environment. This luminaire is not suitable for external dimmers and electronic switches. The correct way to behave is: Place the luminaire to protect it from moisture and dirt. Always be attentive!
Warning: Do not cover the luminaire with objects. Excessive heat can
cause a fire.
During operation, do not look into the light source from a close distance.
Avoid using op-tical devices to peer directly into the light source.
Remove the plug from the power plug to disconnect the lamp from the power
supply. Use only light bulbs as described in the „Technical Data“ chapter.
Installation
Caution
- Read all instructions and warnings carefully before using this product.
- Inspect the device for visible damage before usage.
- Do not place the table lamp in an environment with high temperatures.
- Keep the table lamp away from open flames or scorching environments.
- Do not expose the table lamp to moisture, and never submerge it in liquid.
- Ensure that the table lamp is always dry.
- Do not disassemble this table lamp, and do not attempt to repair or modify it in any way
Luminaire installation
- Note: Remove all packaging material from the product.
- Connect the power plug to a properly installed power outlet.
Your luminaire is now ready for operation.
Switching luminaire on / off:
- Switch on or off the luminaire with the toggle switch.
- If you want to dim the light, use the 3-step dimming function by switching the luminaire on and off with the toggle switch. This will gradually dim the light bulb.
Light Replacement
Switch off the luminaire.
Warning: Risk of electric shock! Disconnect the power plug from the power outlet first. Caution! Risk of burns from hot surfaces! Allow the luminaire to cool entirely before chan-ging the light bulb. Use a clean, lint-free, and dry cloth when changing the light bulb.
- Remove the diffuser using the diffuser removal tool.
- Unscrew the light bulb counterclockwise from the lamp socket.
- Screw a new light bulb clockwise into the lamp socket. Now, insert the diffuser back into the table lamp. Connect the power plug to a properly installed power outlet.
Your luminaire is now ready for operation.
Maintenance and Cleaning
Switch off the luminaire. Warning: Risk of electric shock! Disconnect the power plug from the power outlet first. Caution! Risk of burns from hot surfaces! Allow the luminaire to cool completely. Warning: Risk of electric shock! You should never clean the lamp with water or other liquids for electrical safety reasons, nor should it be submerged in water. Do not use solvents, gasoline or similar substances. The lamp could be damaged. Use only a clean, lint-free, and dry cloth for cleaning. Connect the power plug to a properly installed power outlet.
Disposal: With this logo, we would like to show that we are a customer of the „Green Dot“ system and want to comply with our obligations for system participation according to the Packaging Act. The packaging is made of environmentally friendly materials to be disposed of at local recycling centers.
Please pay attention to the labeling of the packaging materials when separating waste. They are labeled with abbreviations (a) and numbers (b) with the following meanings: 1-7: Plastics / 20-22: Paper and cardboard / 80-98: Composite materials.
In the interest of environmental protection, please do not dispose of your product in household waste when it is no longer needed. Instead, dispose of it properly or return it to us using the Recozy Exchange Program. The product will be recycled and reintegrated into our production cycle. For more information, visit www.recozy.de.
Warranty and Service
The warranty period is 24 months from the date of purchase. This includes a 6-month guarantee from the date of purchase. The geographical scope of the warranty protection is Europe-wide. The invoice serves as proof of purchase. The product has been thoroughly tested for quality and functionality before shipping.
The warranty will be voided in the following cases
- If the installation is faulty.
- If the system is modified without our approval.
- If the damages are caused by moisture, drops or damaged cables.
- If no proof of purchase is available
FAQ
- Q: Can I use the Monk Table Lamp outdoors?
- A: No, the lamp is designed for indoor use only in dry and enclosed areas.
- Q: What should I do if the power plug is damaged?
- A: Do not use the lamp if you notice any damage to the power plug. Contact the service address or an electrician for assistance.
- Q: How do I clean the lampshade?
- A: Use a soft, dry cloth to gently wipe the lampshade. Avoid using any liquid cleaners.
WEEE-Reg.-Nr. DE 88159560
Service address:
Sustainable Manufacturing GmbHIndustriepark 7 27777 Ganderkesee
Germany
Tel.: 0049 4222 7989902
E-Mail: info@recozy.de
www.recozy.de
Manufacturer:
Sustainable Manufacturing GmbH Industriepark 7 27777 Ganderkesee
Germany
Tel.: 0049 4222 7989902
E-Mail: info@recozy.de
www.recozy.de
This product meets the requirements of the applicable European and national
regulations. Conformity has been demonstrated. Corresponding declarations and
documents are kept on file by the manufacturer.
Last Information Update 01/2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>