ABAC G-810P Air Tool Set Kit User Guide
- June 1, 2024
- ABAC
Table of Contents
ABAC G-810P Air Tool Set Kit
Specifications :
- Weight : 4.5 kg
- Dimensions: 600mm x 85mm x 200mm
- Noise Level : 85 dB(A)
- Operating Pressure : 4 – 8 bar
- Year of Production : 2006
- Compliance: EN1953:2013
Product Usage Instructions
Safety Precautions:
Before using the Air Tool Kit, ensure you have read and understood the manual and all tool labels. Follow all safety instructions provided to prevent accidents.
Assembly:
Assemble the components of the Air Tool Kit according to the instructions provided in the manual. Make sure all connections are secure before operation.
Operating Instructions:
Connect the Air Tool Kit to a suitable air compressor with an operating pressure between 4 to 8 bar. Ensure the tool is properly lubricated before use.
Maintenance:
Regularly clean and lubricate the Air Tool Kit to ensure optimal performance. Check for any wear and tear on components and replace them if necessary.
FAQ:
- Q: How do I adjust the operating pressure of the Air Tool Kit?
- A: Use the pressure regulator on your air compressor to adjust the operating pressure within the recommended range of 4 to 8 bar.
- Q: Can the Air Tool Kit be used for heavy-duty applications?
- A: The Air Tool Kit is designed for general-purpose use. For heavy-duty applications, refer to the manual for specific guidelines or consider using specialized tools.
QUICK USER GUIDE
- Scan the QR code and download the full manual
DOWNLOAD
- A: Air Inlet
- B : Trigger
- C: nozzle
- D: suction cup
- E: valve of the wheel
- F: adapters
- G: pressure on gauge
- H: intensity of the liquid flow
- I: width of the jet
Read the manual and tool labels carefully. Read and follow all the instructions.
TECHNICAL SPECIFICATIONS
Declaration of compliance EEC
- WE DECLARE – WE DECLARE THAT THE FOLLOWING PRODU THE FOLLOWING PRODUCT
WAS BUILT IN COMPLIANCE WITH THE FOLLOWING DISPOSITIONS
2006/42/EC
Standard: EN1953:2013
AND WE AUTHORIZE
AARIAC S.r.l. – Via C. Colombo 3, Robassomero (TO) 10070 ITALY
- TO DRAW UP THE TECHNICAL FILE ON OUR BEHALF
Product engineering,
Engineering manager