MINELAB ELECTRONICS Gold Striker Instruction Manual
- June 16, 2024
- Minelab Electronics
Table of Contents
- 1. INTRODUCTION
- 2. GENERAL DESCRIPTION
- 3. UNPACKING AND MECBANICAL SETUP
- 4. BATTERIES
- 5 THE CONTROLS
- 6. OPERATING INSTRUCTIONS
- 7. PROSPECTING TIPS
- 8. ENVIRONMENTAL CONCERNS
- 9. DETECTOR CARE AND TROUBLESHOOTING
- 10 WARRANTY AND SERVICE
- 11 SPECIFICATIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MINELAB ELECTRONICS Gold Striker Instruction Manual
1. INTRODUCTION
2. GENERAL DESCRIPTION
3. UNPACKING AND MECBANICAL SETUP
3.1 Shaft mounting
3.2 Hip mounting
4. BATTERIES
4.1 Installation
4.2 Battery Alternatives
5 THE CONTROLS
5.1 Gold Switch
5.2 Soil Switch
5.3 Tone Control
5.4 Ground Tracking Switch
5.5 Threshold Control
5.6 Sensitivity Control
5.7 Volume Control
5.8 Headphone Socket
6. OPERATING INSTRUCTIONS
6.1 Detector Sounds
6.2 Initial Control Settings
6.3 Ground Balance Procedure
6.4 Search Coil Movement
6.5 Search Pattern
6.6 Pin Pointing
7. PROSPECTING TIPS
7.1 Mineralisation and Hot Rocks
7.2 Clay Domes
7.3 Charcoal
7.4 Searching For Gold
8. ENVIRONMENTAL CONCERNS
9. DETECTOR CARE AND TROUBLESHOOTING
9.1 Proper care of Your Detector
9.2 Troubleshooting
10 WARRANTY AND SERVICE
11 SPECIFICATIONS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>