ASHLEY A4000643 Accent Table Installation Guide

ASHLEY A4000643 Accent Table

IMPORTANT SAFETY NOTICE: READ CAREFULLY BEFORE BEGINNING ASSEMBLY!

• Always use proper tools.
• Follow the assembly steps in order. Do not skip any steps.
• Be sure to check all packing materials carefully for small parts may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
• Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
• Keep the instructions for future reference.
• Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
• When assembling products that have electrical cords (lamps, lights, motors, power strips, etc.), always (1) make sure the electrical cord is unplugged before assembling, (2) be careful not to twist or pinch the electrical cord during and after assembly, and (3) DO NOT USE AN EXTENSION CORD WITH THIS PRODUCT.

Note: During charging, the device and the charger could heat up, this is normal. If the battery gets hotter than usual, the device may stop charging.
WARNING: Remove all metal objects like coins and keys from the charging surface and remove any metal objects attached to your mobile phone before placing the device on the charging surface. Some mobile devices or cases may attract metal objects.

• When assembling shelves or entertainment centers, do not stand on lover shelves in order to assemble upper shelves-use a step ladder.
• Do not stand on tables, including but bot limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
• Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.

NOTE: ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using (this furnishing).
DANGER: To reduce the risk of electric shock:

1. Always unplug this furnishing from the electrical outlet before cleaning or servicing.

WARNING:   To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Unplug from outlet before putting on or taking off parts.
2. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
6. Never drop or insert any object into any opening.
7. Do not use outdoors.
8. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
9. To disconnect, turn all controls to the off position, then remove plug from outlet.
10. For loading always put heavier items at the bottom and not near the top in order to help prevent the possibility of the furnishing tipping over.
11. Each surface intended to support a load shall have a corresponding statement in the use instructions specifying the maximum intended load for that surface in pounds (kilograms),

Warning: Risk of Injury, maximum load 44 Lbs 120Kg for the top surface.

• Risk of Injury, maximum load 11 Lbs 15Kg for the base.

DRY LOCATIONS ONLY
WARNING : Risk of Electric Shock, Fire, and Injury. Review the assembly instructions to confirm that the appropriate critical components and accessories are being used with the furnishing.
SAVE THESE INSTRUCTIONS

NOTE: HARDWARE ARE STORED BESIDE EPS BLOCK

NOTE: UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE.

• DO NOT TIGHTEN ANY BOLTS UNTIL ALL BOLTS HAVE BEEN STARTED!

Important Safety Instructions

• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong arc provided for your safety. When the provided plug does not fit into your outlet, consult an elec1rician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

FCC Warnings

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings and Precautions

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
WARNING: Shock hazard – Do Not Open.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
• Do not ingest battery, chemical burn hazard. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
Caution: Risk of electronic shock
WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

•   The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the
  literature accompanying the appliance.

• The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

• This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.

• WARNING : This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov This product meets and complies with required Federal product guidelines.

RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body.

Overview

Control Panel & Inputs

1. Power/Source: Press to power ON. Press and hold to power OFF. When powered ON, press to change audio source between Wireless, USB and AUX in.

2. Press button : LED(Six modes)
   Double press button: EQ(ROCK/POP/MOVIE)
   Press button 3 seconds: Power off LED

3. Play/Pause/Pair: Press to play/pause a track. Press and hold for 3 seconds to manually pair to a Wireless device or disconnect the wireless device.
   Play Plus Mode: In Wireless mode. Double press button to pair other unit.

4. Volume+/-: Press to raise or lower volume. Press and hold to skip forward or back a track.

5. Party Plus LED: Flashing green while pairing. Solid green when connected.

6. Power/Source/Wireless LED:

   • Solid Red: Unit is off.
   • No Light: Unit does not have power.
   • Flashing Blue: Unit is attempting to pair with a wireless device.
   • Solid Blue: Unit is paired with a wireless device.
   • Solid Green: Unit is in Aux in mode.
   • Solid Cyan: Unit is in USB mode.

7. USB Charging Port/ USB Media port

8. Aux in (3.Smm Input)

9. Type-C Charging Port

10. DC Power In put

Powering The Speaker

To power the unit, connect the DC power input on the table to a standard power outlet using the included AC/DC power adapter.

Features

• Wireless Audio – range 59 ft.
• Digital volume control
• RGB Light
• 3.5mm Aux in
• Party plus mode(TWS)
• USB/Type-C charging port
• Voice prompts announce speaker functions
• 10W wireless charger

Wireless Audio
Pairing & Playing Audio

1. When first powered on, the speaker defaults to Wireless Mode and is ready to pair automatlcal ly. When pairing, remain within 3 feet of the unit
2. Using the controls on your Wireless device, select A4000643 in the Wireless settings to pair. When successfully paired, a voice will announce the connection.
3. Use the controls on the connected Wireless device to select and play audio. Use the speaker controls or the connected Wireless device to play pause, and adjust the volume level.
4. After initial pairing, the speaker will automatically connect to the last Wireless device used whenever it is in Wireless Mode. Note: If your device should become unpaired or you find it is unable to connect, press and hold the Play button to enter Pairing Mode. A voice will announce, “Wireless is connecting,8 and you can connect to the speaker manually.

Party Plus Mode
If you have another A4000643 table speaker, you can pair and play the two speakers together for a surround sound effect.

1. To enter Party Plus Mode, please make sure the unit is in wireless mode. Double press button Play/Pause/Pair, on one of the tables, then do the same on the other table. Whichever table you activate Party Plus Mode on first is now theprimary unit.
2. When the two speakers are paired together a voice will announce the connection.
3. Use your device to select and play tracks. The audio will now be heard through both speakers.
4. To disconnect the speakers, Double press button Play/Pause/Pair .

Note: To use Party Plus Mode, please make sure that you connect the speaker before pairing to your Wireless device. You will not be able to connect the speakers If you are already paired to a Wireless device.

Auxin
Requires a 3.5mm audio cable(not included).

1. Connect a 35mm audio cable to the Aux In on the unit and the audio output/headphone jack on an audio device.
2. Press Power/Source to switch to Aux In mode.
3. Use the controls on the connected device to select and play audio,

Note: Newer phone models may require an adapter (lightning to 3.5mm headphone adapter for iPhone) or (USB-C to 3.5mm audio adapter) for android.

USB Playback

1. Load a USB drive in to the USB Media port. The speaker will automatically switch to USB mode, solid cyan light when in USB mode, and begin playing media on the drive.
2. Use the controls on the speaker to select and play audio from the connected drive.

USB/Type-C Charging Port
Plug your USB/Type-C charging cable (not included) Into the USB/Type-C Charging Port on the table and the other end into your device and the device will begin charging.
Note: The USB/Type-C charging port is for charging mobile devices.

Wireless Charging

Place your phone onto the Power Pad to begin charging.
Note: you may need to remove your phone case In order to begin charging.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>