CRUX SWRNS-63F Radio Replacement with Steering Wheel Control Retention User Manual

CRUX SWRNS-63F Radio Replacement with Steering Wheel Control Retention

USER MANUAL

SWRNS-63F

Radio Replacement with Steering Wheel Control Retention for Select NISSAN SENTRA Vehicles 2019 and Up with out CarPlay

PRODUCT FEATURES:

• Retains factory features in select Nissan vehicles while functioning with an aftermarket radio.
• Pre-programmed to retain factory Medium Speed CAN-Data Bus Steering Wheel Controls.
• Includes antenna adapter.
•  Retains Bose Amplifier.
• Retains factory USB & Auxiliary input . Pe
• Retains factory camera (not 360 panoramic camera)
• Provides outputs for parking brake and reverse gear.

PARTS INCLUDED:

INSTALLATION DIAGRAM FOR NON-AMPLIFIED VEHICLES:

DIP SWITCH SETTINGS:

AFTERMARKET RADIO DIP SWITCH SETTINGS:

NOTE: For Atoto, Blaupunkt, Dual, Farenheit, Nakamichi, Power Acoustik, Soundstream, and most off-brand radios, check the aftermarket radio’s manual to see if the SWC buttons need to be programmed.

4-PIN SWC CABLE

Use the proper 3.SMM to 4-Pin SWC cable for the aftermarket radio you are using.

OPTION A is used for ALPINE, CLARION, JVC, and KENWOOD units (Blue/Yellow wire is attached)

OPTION B is used for ATOTO, BLAUPUNKT, BOSS, DUAL, FARENHEIT, JENSEN, POWER ACOUSTIK, PIONEER, SONY, SOUNDSTREAM and Most Off-Brand Radios.

NOTE: Cap or insulate the 3.5mm plug or Blue/Yellow wire if not being used.

For aftermarket radios that have wires for SWC connections, cut off the 3.5mm plug on the Crux SWC Cable (option B) and connect the SWC wires as follows:

Note that there are some radios that only have SWC1 and SWC2, in this case “shield” does not need to be connected.

VEHICLE APPLICATIONS:

NISSAN
2019 and Up Sentra with out CarPlay, Bose & Nav

Note: With CarPlay/Android Auto, factory radio, use CRUX Part #SWRNS-63FC

NOTE: Some SWC functions might not be retained for the following radio series:

Planet Audio P9900CPA, Jensen CAR 710, Atoto F7, and similar radios of these brands.

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: 818-609-9299 • fax: 818-996-8188 • www.cruxinterfacing.com

Specifications:

• Product Name: SWRN S-63F
• Compatibility: Select NISSAN SENTRA Vehicles 2019 and Up without CarPlay

Features:

• Pre-programmed to retain factory Medium Speed CAN-Data Bus
  Steering Wheel Controls

• Includes antenna adapter

• Retains Bose Amplifier

• Retains factory USB & Auxiliary input

• Retains factory camera (not 360 panoramic camera)

• Provides outputs for parking brake and reverse gear

Installation Instructions for Non-Amplified Vehicles:

Follow the diagram below for proper installation:

DIP Switch Settings for Aftermarket Radio:

Refer to the following settings based on your radio brand:

Atoto, Dual, Fahrenheit, Jensen, Nakamichi, Pioneer, Power
Acoustik, Soundstream| 1: OFF, 2: ON, 3: ON
Alpine Clarion, Stinger Kenwood JVC Boss, Old Sony New Sony
(with CarPlay)| 1: OFF, 2: OFF, 3: ON

Vehicle Applications:

Compatible with NISSAN 2019 and Up Sentra without CarPlay, Bose & Nav.

Frequently Asked Questions (FAQ):

Q: Which radios are not fully compatible with SWRN S-63F?

A: Some SWC functions might not be retained for the following radio series: Planet Audio P9900CPA, Jensen CAR 710, Atoto F7, and similar radios of these brands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>