ANKER A91C5 MagGo Magnetic Charging Station User Guide
- June 1, 2024
- Anker
Table of Contents
Anker MagGo Magnetic Charging Station (8-in-1, 67W)
USER GUIDE (A91C5)
Using Your Product
LED Indicator
LED Indicator | Status |
---|---|
Solid blue | Charging your devices or fully charged. |
Flashing blue | Detected metal objects. |
Specifications
Electrical Rating | 125V~, 60Hz, 10A, 1250W |
---|
Total USB Output 47W with Wireless Output 15W Max
Total USB Output 67W without Wireless Load
1 Port| USB-A1/USB-A2 Output: 5V 2.4A (12W Max)
USB-C1/USB-C2 Output: 5V 3A / 9V 3A / 15V 3A / 20V **** 3.35A
(67W Max Each Port)
2 Ports| USB-C1/USB-C2+USB-A1/USB-A2 Output 45W Max+12W Max
USB-C1+USB-C2 Output: 20W Max+45W Max or 45W Max+20W Max or 30W Max+30W Max
USB-A1+USB-A2 Output: 12W Shared Max
3 Ports| USB-C1+USB-C2+USB-A1/USB-A2 Output: 30W Max+20W Max+12W Max or 20W
Max+30W Max+12W Max
USB-C1/USB-C2+USB-A1+USB-A2 Output: 45W Max+12W Max(USB-A1, USB-A2 share 12W
Max)
4 Ports| USB-C1+USB-C2+USB-A1+USB-A2 Output: 30W Max+20W Max+12W Max or 20W
Max+30W Max+12W Max (USB-A1, USB-A2 share 12W Max)
Note: The built-in USB module supports an input voltage of 100V-240V~, 50-60Hz.
Important Safety Instructions
- Do not connect this product to an ungrounded outlet.
- Do not use with extension cords.
- Use in dry locations and indoors only.
- Do not connect this product to other power strips.
- Keep children away from this product.
- The product is not intended to be repaired by service personnel in case of failure or component defect, waste products need to be disposed of in accordance with national environmental protection regulations.
- The surge protection feature can protect your computers, smartphones and other electronic equipment against voltage fluctuations, surges, and spikes. If the surge protection light is off, it indicates that surge protection is not functioning normally.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party:
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: 1-800-988-7973
Radiation Exposure Statement
This equipment complies with FCC Radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the product and your body.
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is
subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
RSS-GEN
This device contains licence-exempt transmitter(s)/receiver (s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference
- This device must accept any interference, Including interference that may cause undesired operation of the device.
IC RF exposure statement:
This equipment complies with IC Radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 10cm between the product and your body.
Connected Equipment Warranty
Anker Innovations Limited (“Anker”) offers a limited Connected Equipment
Warranty (CEW) for Anker Power Strips and Outlet Extenders as listed below.
The product shall be purchased originally from Anker and free of defects in
design, assembly, material, or workmanship.
Anker reserves the right to update, amend, and/or revise the terms of this
CEW.
For more details about the CEW, please refer to the official website:
https://us.anker.com/pages/connected-equipment-warranty
Or scan the QR code below:
https://us.anker.com/pages/connected-equipment-warranty
For tutorial videos, FAQs, manuals, and more information, please visit:
https://support.anker.com
Or scan the QR code below:
https://rainbowbridge.anker.com/qrscan?key=anker-221202
| |
---|---|---
@anker_offcial
@anker_jp| @AnkerDeutschland
@AnkerJapan
@Anker| @AnkerOffcial
@Anker_JP
USER GUIDE
https://rainbowbridge.anker.com/qrscan?key=Anker_A91C5_UG
Product Number: A91C5
51005004232 V01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>