MAJOR FITNESS Spirit B52 Power Cage Installation Guide

MAJOR FITNESS Spirit B52 Power Cage

SERVICE

For the best service, please have the following information ready when requesting for service:

• Buyer Full Name
• Order Number
• Part Number
• Part Picture
• Model Number
• Phone Number

If you have any questions, receive a damaged part or need additional service support, please contact our customer service department via the following methods:

Please Email:
after-sale@major-lutie.com
Response Time: 1-2 Business Days
Emailing us with the information above will be the best method to receive a response.
Toll-Free: 800-276-8577
(9:00 AM – 4:00 PM EST, Monday – Friday)

Visit Website:
major-lutie.com

GUIDEILNES

Before using this equipment, it is strongly recommended that you consult your physician whether this fitness equipment is applicable to you. Please do not use this machine if you have the following conditions or diseases:

• Heart Disorders
• Recent Stroke or Transient Ischemic Attack
• Extreme Obesity
• Pregnancy
• Bone Weaknesses
• Spinal Injury
• High Blood Pressure or Hypertension
• Hiatus Hernia or Ventral Hernia
• In a State of Intoxication or Fatigue
• Other diseases that are NOT recommended by doctors for exercise

This equipment is designed and intended for home and consumer use only, not for commercial use.

Please read all instructions carefully before assembling or operating this product.

This workout equipment is designed and built for optimum safety. However, certain precautions apply whenever you operate this exercise equipment. Be sure to read the entire manual before assembling and operating this equipment. Also, note the following safety instructions:

1. Two people are recommended for the installation of this product instead of one.
2. If you feel dizzy, or other abnormal sensations at any time while operating this device, please stop using the product or exercise and contact your physician as soon as possible.
3. Make sure your equipment is correctly assembled before you use it. Be sure all the screws, nuts, and bolts are tightened prior to use.
4. If this equipment or parts are damaged, do not use it again to exercise.
5. Please do not eat within one hour before using the machine.
6. This product should be placed on a flat surface when using. A mat or other covering material on the ground is recommended.
7. Keep children and pets away from this equipment at all times.
8. It is recommended to wear tight training clothes, tie your hair up, preferably in a pill, and remove your jewelry when using this product to avoid unexpected hazards.
9. It is recommended that novice or teenagers should be accompanied by a trainer or parents to use our products, and children under 12 years old are not recommended to use this fitness equipment.
10. The users of this product should keep their weight within 220lb/100kg.

PREPARATION

1. Tools for assembly:
   General tools you may need for the assembling this strength equipment:

   • Electric screwdrivers
   • Hexagon wrench sets
   • Wrench sets and adjustable wrenches
   • Rubber Hammer
   • Lubricant

2. Insert bolts into the frame as illustrated in the drawing of each of the steps.

3. Hand-tighten the bolts and nuts during assembly. Tighten all the hardware once the entire unit has been completely assembled.

4. With the proper assistance, the right tools, and strictly following the assembly steps, and given enough time.

5. Thoroughly read each step before proceeding to assemble the parts of that step.

6. To help make it easier for you to assemble the device, we have noted the required hardware in the every steps.

7. When the equipment is fully assembled check all the functions for correct operation. Consult the manual if you experience any issues, or for further help please contact our service department.

8. Please regularly check if the screws are loose, and if they are, tighten them quickly.

PARTS LIST

PARTS LIST

HARDWARE LIST

ACCESSORIES LIST

Do not tighten all bolts until all installations are complete.

Assembly Instructions

STEP 1.

NOTE : Except for pre-installing the hardware you need.

STEP 2.

NOTE : Except for pre-installing the hardware you need

STEP 3.

NOTE :Except for pre-installing the hardware you need.

STEP 4.

NOTE : Except for pre-installing the hardware you need.

STEP 5.

NOTE : Except for pre-installing the hardware you need.

STEP 6.

NOTE :Except for pre-installing the hardware you need.

STEP 7.

NOTE : Except for pre-installing the hardware you need.

STEP 8.

STEP 9.

NOTE :Except for pre-installing the hardware you need

STEP 10.

NOTE : Except for pre-installing the hardware you need.

STEP 11.

NOTE :Except for pre-installing the hardware you need.

STEP 12.

NOTE :Except for pre-installing the hardware you need.

As shown in the figure, first hang the barbell bar on component X, use a wrench to loosen the pre locked screw on the barbell bar: M10 * 20L, remove the barbell sleeve from the barbell bar, then install AF onto the barbell bar, and then install the barbell sleeve onto the barbell bar, locking the screw.

Attention : When installing component AF, the short end of the single pass should be facing inward and the long end should be facing outward.

STEP 13.

NOTE : Except for pre-installing the hardware you need

STEP 14.

NOTE : Except for pre-installing the hardware you need

STEP 15.

STEP 16.

STEP 17.

Please regularly check whether the gcrews are tight.

References

• lutie.com
• Major Fitness All-in-One Home Gym Equipment and Accessories - MAJOR FITNESS Formerly MAJOR LUTIE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>