MAJOR FITNESS PS1A Power Cage User Guide

: June 1, 2024
: MAJOR FITNESS

Table of Contents

MAJOR FITNESS PS1A Power Cage
Product Usage Instructions
SERVICE
safety instructions
PREPARATION
PARTS LIST
HARDWARE LIST
INSTALLATION STEPS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MAJOR FITNESS PS1A Power Cage

Specifications

Brand: Major Lutie
Usage: Home and consumer use only
After-sales service email: after-sale@major-lutie.com
Toll-Free Number: 800-276-8577 (9:00 AM – 4:00 PM EST, Monday – Friday)

Product Usage Instructions

Preparation

Tools needed for assembly:
- Electric screwdrivers
- Hexagon wrench sets
- Wrench sets and adjustable wrenches
- Rubber Hammer
- Lubricant
Insert bolts into the frame as illustrated in the drawing of each step.
Hand-tighten bolts and nuts during assembly, then tighten all hardware once the unit is fully assembled.
Follow assembly steps carefully with proper assistance, tools, and time.
Read each step thoroughly before proceeding.
Check all functions after full assembly for the correct operation.
Regularly check and tighten loose screws.

Assembly

A. Underframe:
- Parts List:
- Front pillar tube x2
- Rear pillar tube x2
- Top beam tube x2
- Bottom connecting pipe x1
- Upper connecting pipe x1
- Pull-up tube x1
- Left transverse branch x1
- Right transverse branch x1
- Left hook x1, Right hook x1
- Left handlebar tube x1, Right handlebar tube x1
- Pedal x1
- Weight frame x1
- Reinforce x1
- Perforated large round iron sheet group x2
- Carriage x1
- 72 Casing x2
- Weight-bearing guide rod x2
- Acrylic plate set x1
- Cable x2, Down junction plate x4
- Load bearing tube U x2, Upper load X x2, Gun barrel frame Y x1

Frequently Asked Questions (FAQ):

Q: Can this equipment be used for commercial purposes?

A: No, this equipment is designed and intended for home and consumer use only.

Q: What should I do if I receive a damaged part?

A: If you receive a damaged part or need additional service support, please contact our customer service department via email at after-sale @major-lutie.com with the necessary information for assistance.

Q: How do I ensure the correct operation of the equipment after assembly?

A: After full assembly, check all functions for correct operation. If you experience any issues, consult the manual or contact our service department for further assistance.

SERVICE

For the best service, please have the following information ready when requesting service:

Buyer Full Name
Order Number
Part Number
Part Picture
Model Number
Phone Number
If you have any questions, receive a damaged part, or need additional service support, please contact our customer service department via the following methods:
Please Email: after-sale@major-lutie.com
Response Time: 1-2 Business Days
Emailing us with the information above will be the best method to receive a response.
Toll-Free: 800-276-8577 (9:00 AM – 4:00 PM EST, Monday – Friday)
Visit Website: major-lutie.com

GUIDELINES

Before using this equipment, it is strongly recommended that you consult your physician whether this fitness equipment applies to you.
Please do not use this machine if you have the following conditions or diseases:
Heart Disorders
Recent Stroke or Transient Ischemic Attack
Extreme Obesity
Pregnancy
Bone Weaknesses
Spinal Injury
High Blood Pressure or Hypertension
Hiatus Hernia or Ventral Hernia
In a State of Intoxication or Fatigue Other diseases that are NOT recommended by doctors for exercise
This equipment is designed and intended for home and consumer use only, not for commercial use.
Please read all instructions carefully before assembling or operating this product.
This workout equipment is designed and built for optimum safety. However, certain precautions apply whenever you operate this exercise equipment.
Be sure to read the entire manual before assembling and operating this equipment. Also, note the following.

safety instructions

Two people are recommended for the installation of this product instead of one.
If you feel dizzy, or other abnormal sensations at any time while operating this device, please stop using the product or exercise and contact your physician as soon as possible.
Make sure your equipment is correctly assembled before you use it. Be sure all the screws, nuts, and bolts are tightened before use.
If this equipment or parts are damaged, do not use it again to exercise.
Please do not eat within one hour before using the machine.
This product should be placed on a flat surface when used. A mat or other covering material on the ground is recommended.
Keep children and pets away from this equipment at all times.
It is recommended to wear tight training clothes, tie your hair up, preferably in a pill, and remove your jewelry when using this product to avoid unexpected hazards.
It is recommended that novices or teenagers should be accompanied by a trainer or parents to use our products, and children under 12 years old are not recommended to use this fitness equipment.
The users of this product should keep their weight within 220lb/100k

PREPARATION

Tools for assembly: General tools you may need for assembling this strength equipment:
- Electric screwdrivers
- Hexagon wrench sets
- Wrench sets and adjustable wrenches
- Rubber Hammer
- Lubricant
Insert bolts into the frame as illustrated in the drawing of each of the steps.
Hand-tighten the bolts and nuts during assembly. Tighten all the hardware once the entire unit has been completely assembled.
With the proper assistance, the right tools, strictly following the assembly steps, and given enough time.
Thoroughly read each step before proceeding to assemble the parts of that step.
To help make it easier for you to assemble the device, we have noted the required hardware in every step.
When the equipment is fully assembled check all the functions for correct operation. Consult the manual if you experience any issues, or for further help please contact our service department.
Please regularly check if the screws are loose, and if they are, tighten them quickly.