SEALEY FW5025605 Flap Wheels Instruction Manual

SEALEY FW5025605 Flap Wheels

Specifications:

• Product Name: Flap Wheels
• Material: Aluminium oxide abrasive
• Ideal for: Finishing curved and intricate metal surfaces

Product Usage Instructions

Introduction:

Flap wheels are designed for finishing curved and intricate metal surfaces using aluminium oxide abrasive.

Safety:

• Read and understand all instructions provided.
• Always wear safety glasses, ear protection, gloves, and a dust mask.
• Ensure proper ventilation in the work area.
• Use the correct type of wheel for the specific job.
• Avoid contact between hands and the wheel during operation.
• Check compatibility between the tool and flap wheel.
• Verify that the spindle speed of the tool does not exceed the operating speed marked on the wheel.
• Power off and remove chuck keys before changing the wheel.
• Inspect the wheel for any signs of damage before use.
• Do not use damaged or cracked flap wheels.
• Avoid overloading the wheel during operation.
• Do not use the wheel if it is not spinning freely.

Maintenance:

• Replace the wheel when worn out or damaged.
• Store the wheel in a dry, cool place when not in use.

FAQ:

• Q: What should I do if I notice my flap wheel is damaged?
  A: Do not use damaged flap wheels. Replace them immediately to prevent any risks during operation.

• Q: Can I use flap wheels for materials other than metal?
  A: Flap wheels are specifically designed for finishing metal surfaces. It is recommended to use them for their intended purpose only.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
IMPORTANT : PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR  PERSONAL INJURY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE

• Read instructions before use
• Wear eye protection
• Wear ear protection
• Wear protective gloves
• Wear a mask

INTRODUCTION

Aluminium oxide abrasive flap wheels are ideal for finishing curved and intricate metal surfaces.

SAFETY

WARNING! If used incorrectly, this product can cause damage or injury to the operator. Ensure all instructions are read and understood, including the instructions of the tool the flap wheels are being used with.

• Refer to the manufacturer’s manual of the tool the flap wheel is being used with for information on correct mounting and use.
• Always wear safety glasses, ear protection, gloves and dust mask when using cutting or grinding wheels.
• Ensure the work area is well-ventilated.
• Use the correct type of wheel for the job you are doing.
• Keep your hands away from the wheel.
• Ensure the tool and flap wheel are compatible, and suitable for the task at hand by following all markings.
• Check the spindle speed of the tool is no higher than the operating speed marked on the wheel.
• Turn off the power and remove chuck keys etc. before changing the wheel.
• Disconnect from the mains or remove the battery (if applicable) before making any adjustments to the tool.
• Inspect the wheel carefully before use. Make sure it is not cracked, chipped, or damaged in any way.
• Run the flap wheel up before use to ensure it is spinning correctly.
• DO NOT use flap wheels if they are cracked, chipped, or damaged in any way.
• DO NOT overload the wheel.
• DO NOT use the wheel if it is not spinning freely.

MAINTENANCE

• Replace the wheel when it is worn out or damaged.
• Store the wheel in a dry, cool place.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations

Note : It is our policy to continually improve products and as such we reserve the right to alter data, specifications and parts without prior notice.
Important : No Liability is accepted for incorrect use of this product.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
© Jack Sealey Limited

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>