Rdi Technology CasaCam RE5 Wireless Signal Repeater User Guide

June 6, 2024
RDI TECHNOLOGY

Rdi Technology CasaCam RE5 Wireless Signal Repeater

WARNING! STRANGULATION HAZARD
Children  have  accidentally  become  tangled  in  cords  and been strangled. Please keep all cords out of the reach of children anduse only the adapters provided.

What’s included:

Product Overview

Getting Started

  1. Connect one end of the RE5’s power adapter to the cable of the RE5 power port and the other end to an electrical outlet.
  2. Choose the camera channel that you want to extend the signal on the monitor screen (menu‐>camera‐>pairing), when the monitor is on pairing, press the RE5 RX pair button, the RX LED will flash red.When the RE5 and the monitor are paired,the RX LED will be in solid green.
  3. Press  the  RE5  TX  pair  button  andthen  press  the  camera pair button.The TX LED will flash red. When the RE5 and the camera are paired,the TX LED will be in solid green

Notice: To minimum interference, pls keep the distance between the camera and the RE5 more than 2 meters.

Troubleshooting:

  1. Out of Range:
    •  Make sure the camera& the monitor & the RE5are connected securely to the power adapter.
    • Make  sure  the  camera&  the  monitor  are  paired with the RE5.
    •  Flip up the camera &the monitor & RE5’s antenna will help to improve the wireless range.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals