XPOtool 61546 Rolling Work Seat Instruction Manual
- June 13, 2024
- XPOtool
Table of Contents
XPOtool 61546 Rolling Work Seat
Product Information
- This is an Operation Manual for the Rolling Work Seat. The product code is 61546. Please note that the illustration provided may vary depending on the model. For any technical changes, please refer to the most recent version of this manual, as illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
- For any inquiries or assistance, you can contact the customer service team via email at service@wiltec.info or by using the contact form available at https://www.wiltec.de/contacts/
- To access the most recent version of this manual in several languages, you can visit our online shop at https://www.wiltec.de/docsearch
- For any returns or exchanges, please use the following postal address: [Postal Address]
- Before returning your goods, please contact our customer service team to ensure a trouble-free complaint or return process. If you have any specific questions or need assistance with the product, you can also visit https://www.XPOtool.com for expert advice from The Tool Experts.
Product Usage Instructions
Introduction:
- Thank you for choosing to purchase this quality product.
- Read this operating manual carefully and make sure you understand it.
- Keep these operation instructions in a safe place.
Safety Instructions:
Please follow these basic safety precautions when using the Rolling Work Seat
to minimize the risk of injury.
[Provide detailed safety instructions from the manual, if available]
Parts List:
- A. Frame
- B. Plastic seat shell
- C. Seat
- D. Tyres
- E. Rear axles
- F. Rear supporting plate
- G. Reinforcing plates
- H. Axle holder
- e. Washer M12
- f. Nylon nuts M8
- g. Nylon nuts M10
- h. Nylon nuts M12
Explosion View and Assembly:
Follow the steps below to assemble the Rolling Work Seat:
- Step 1: Slide the rear axle (E) through the perforated square frame of the frame (A).
- Step 2: Slide the axle holder (H) on both ends of the axles.
- Step 3: Fix the tyres (D) to both ends of the axles using M12 washers (e) and M12 nylon nuts (h).
Important Note:
Reproduction and any commercial use of this operating manual or its parts
require written permission from WilTec Wildanger Technik GmbH.
Please read and follow the operating instructions and safety information prior
to the initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate
insignificantly due to continuous further developments.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved. WilTec Wildanger Technik GmbH
cannot be held liable for any possible mistakes in this operating manual or in
the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH
has made every possible effort to ensure that this operating manual is
complete, accurate, and up-to-date, errors cannot be ruled out entirely. If
you have found an error or wish to suggest an improvement, we look forward to
hearing from you.
Send us an e-mail to:
- service@wiltec.info or use our contact form: https://www.wiltec.de/contacts/
- The most recent version of this manual in several languages can be found in our online shop: https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the
following address. Atten-tion! To allow for a trouble-free complaint or
return, it is important to contact our customer service team before returning
your goods.
E-mail : service@wiltec.info
Phone : +49 2403 55592–0
Fax : (+49 2403 55592–15)
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to
always take some basic safety precautions when using this product. Please read
this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
- The rolling work seat is not a toy! It is not suitable for children.
- Dermaximum charge capacity of the rolling work seat is 150 kg. The maximum capacity must not be exceeded.
- Do not inflate the tyres too much. Der maximum pressure is 2.06 bar (30 psi).
- Do not use the seat on slopes. The seat could tip over.
- Do not use the rolling seat when parts are damaged or broken.
Parts list
| Letter | Name | Qty. | Letter | Name | Qty. |
|---|---|---|---|---|---|
| A | Frame | 1 | E | Rear axles | 2 |
| B | Plastic seat shell | 1 | F | Rear supporting plate | 1 |
| C | Seat | 1 | G | Reinforcing plates | 2 |
| D | Tyres | 4 | H | Axle holder | 4 |
| Letter | Name | Qty. | Letter | Name | Qty. |
|---|---|---|---|---|---|
| a | Screw M8×20 | 4 | e | Washer M12 | 4 |
| b | Bolt M10×15 | 4 | f | Nylon nuts M8 | 4 |
| c | Washer M8 | 4 | g | Nylon nuts M10 | 4 |
| d | Washer M10 | 4 | h | Nylon nuts M12 | 4 |
Explosion view and assembly
-
Step 1
Fix the seat (C) to the upper frame with the help of the M10×15 bolts (b), the M10 washers (d), and M10 nylon nuts (g). -
Step 2
Fix the front part of the plastic seat shell (B) to the front frame with the help of the reinforcing plate (G), M8×20 screws (a), M8 washers (c), and M8 nylon nuts (f). Fix the front part of the plastic seat shell (B) to the front frame with the help of the reinforcing plate (G), M8×20 screws (a), M8 washers (c), and M8 nylon nuts (f). -
Step 3
Slide the rear axle (E) through the perforated square frame of the frame (A), then slide the axle holder (H) on both ends of the axles before fixing the tyres (D). Fix the tyres (D) to both ends of the axles with the help of M12 washers (e) and M12 nylon nuts (h).
Important Note:
Reproduction and any commercial use (of parts) of this operating manual,
requires the written permission of WilTec Wildanger Technik GmbH.
https://www.XPOtool.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>