ANTOP AT-221BV Aero + Amplified Indoor HDTV Antenna User Manual
- June 3, 2024
- ANTOP
Table of Contents
AT-221BV Aero + Amplified Indoor HDTV Antenna
User Manual
INSTRUCTIONS
Installation Instruction Manual
Your AERO + Smartpass Amplified HDTV Antenna / AT-221BV is perfect for indoor
use. Antop’s new generation digital technology allows you the flexibility to
set up your antenna in various locations and still receive a great digital
reception.
Antop’s New Generation Digital Technology
- Smartpass Amplifier: all-in-one design allows easier connection, and delivers correct balance between short-and long-range reception.
- 5G LTE Cellular Filter: blocks 3G, 4G & 5G signals for noise-free TV reception.
- Enhanced VHF signal frequency range with extendable rods. Enabled to extend up to 15 inches and rotate up to 180°.
Following are instructions for indoor installation. Read through all instructions prior to beginning the installation procedure.
Note : Although this antenna is great for indoor use, a higher mounting
location positioned towards the broadcast tower may result in better
reception. Install the antenna as high as possible, preferably with a clear
path between the antenna and the TV station transmitters. Trees, buildings,
mountains, etc., can all impact the performance of any antenna.
Installation
1.1 Tabletop Placemen t Test the antenna in multiple locations to find
the one with the best reception quality and place the antenna there. A high
location or positioning of the antenna toward the broadcast tower may result
in better reception.
1.2 Wall Mount Measure the distance between the two hanging holes and
mark them on the wall. Install the anchors and screws in the wall according to
your marks. Match screws to hanging holes to hang the antenna.
1.3 VHF Enhancement Rods Attach the VHF rods enhancers onto the
antenna back. Tune to a local channel between 2 and 13. Extend the rods and
rotate them until you get the best picture. (See Section 2.1)
Connecting
2.1 Connect the coaxial cable attached to the antenna to the ANTENNA/CABLE IN connector on the back of the N or converter box. Connect the USB cable between the DC socket in the Smartpass Amplifier and an open USB port with DC 5V output on the back of the N. If the N does not have a USB port with DC 5V output, use the included power adapter to power the Smartpass Amplifier via a wall outlet.
The Smartpass Amplifier must be powered in order to function. Push the Switch On or Off and select the setting with which more channels are received.
- Switch Off – The LED indicates yellow for normal amplification.
- Switch On – The LED indicates green for stronger amplification.
can channels after each setting change to the Smartpass Amplifier
2.2 Switch the antenna power switch to On at the back of the antenna, so the
LED light on the antenna is green indicating the antenna is working.
Setting and Scanning
In the N’s setup menu, set the input to “Antenna” or “Air”, then, set N to “Scan” for channels. Consult the N manual for detailed instructions.
WARRANTY POLICY
Customers should first contact their place of purchase to determine the
reseller’s warranty policy. Antop Antenna’s warranty will take effect after
the expiration of the reseller’s policy. Antop Antenna warrants its products
for a period of one (1) year from the original date of purchase. The warranty
is valid only with proof of purchase. Warranty does not apply to defects or
failures of the product caused by: neglect misuse, negligence, accident,
abuse, mishandling, misapplication, alteration, modification, power outage,
unauthorized/unreasonable use, or any uncontrollable environmental damage.
RETURNS & REFUNDS
For any return, customers should first contact their place of purchase to
determine the reseller’s return policy. If purchased erectly from Antop
Antenna or before returning erectly to Antop Antenna, a Return Material
Authorization (RMA) number must be obtained in advance by contacting Antop
Antema customer service via e-mail or telephone. Merchandise returned to Antop
Antenna must have an RMA number displayed on the box and a copy of your proof
of purchase on the page. Absolutely no refund after 30 days of a pun: these
are from Antop Antena. A restoring fee of 15% may be deducted from any refund,
ask the representative for further details. Refund policy for US & Canada
customers only.
EXCHANGE & REPLACEMENT
For any exchange or replacement, customers should first contact their place of
purchase to determine the reseller’s policies No upgrades err exchanges for
different models or SKI l’s. One (1) Year limited manufacturer’s warranty for
exchange of product due to malfunction, failure or defect, missing parts or
components. Exchanges will be for the same item, model, and/or SKU, within one
(1) year of the original purchase date. A Return Material Authorization (RMA)
number must be issued by Antop Antenna prior to returning any product or part.
To obtain an RMA, contact Antop Antenna via email or telephone.
SHIPPING & COSTS
The customer will be responsible for the shipping costs of merchandise sent to
Antop Antenna. Please consult a customer service representative for details.
When shipping any item to Antop Antenna, please consider using a trackable
shipping method. Antop Antenna cannot be held responsible for lost or
misdirected shipments. Exchanged and returned products must be sent to Antop
Antenna, RMA Department, 1650 S. Balboa Ave, Ontario, California 91761. To
receive a Return Material Authorization from Antop Antenna please send your
request to RMA Dept Support@antopusa.com or
speak to Customer Service: via telephone, M-F, 9 am to 5 pm (PST)
909-947-8883.
www.antopusa.com
ANTOP ANTENNA INC I Tel. 909.947.8883 I
Email: Support@antopusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>