ANTOP AT-1068 Paper Thin Indoor HDTV Atenna with Smartpass Amplifier and LTE Filter User Manual
- June 6, 2024
- ANTOP
Table of Contents
Paper-Thin Indoor HDTV Antenna with Smartpass Amplifier and LTE Filter
User Manual
INSTRUCTIONS
Instruction Manual Your Paper-Thin Indoor HDTV Antenna with Smartpass
Amplifier and SG LTE Cellular Filter / AT-106B can be used anywhere Indoors:
at Home or even with your Mobile Home/RV. ANTOP’s New Generation Digital
Technology allows you the flexibility to set up your antenna in various
locations and still receive a great digital reception.
ANTOP’s New Generation Digital Technology
- Smartpass Amplifier: all-in-one low-noise design allows easier connection, delivers correct balance between short and long-range reception.
- 56 LTE Cellular Filter: blocks 3G, 4G & 56 signals for noise-free N reception.
Following are instructions for indoor installation. Read through all instructions prior to the beginning the installation procedure.
Connecting
Connect the coaxial cable attached to the antenna to the ANTENNA/CABLE IN connector on the back of the TV or converter box. Connect the USB cable between the DC socket in the Smartpass Amplifier and an open USB port with DC SV output on the back of the N. If the N does not have a USB port with DC SV output, use the included power adapter to power the Smartpass Amplifier via wall outlet.
The Smartpass Amplifier must be powered in order to function.
Push the Switch On or Off and select the setting with which more channels are
received.
Switch Off – The LED indicates yellow for normal amplification.
Switch On – The LED indicates green for stronger amplification.
Scan channels after each setting change to the Smartpass Amplifier
Setting and Scanning
In the TVs setup menu, set the mode to “Antenna” or “Air”, then, set TV to
“scan” for channels. Consult the TV manual for detailed instructions.
Locating and Placing
Test the antenna in multiple locations to find the best one before mounting
the antenna. A high location or positioning of the antenna toward the
broadcast tower may result in better reception.
Mounting / Standing
Secure the antenna with the provided double-sided foam sticker on any non-
metallic structure. The antenna can be also mounted on the table stand
included in the package for desktop placing.
Table Stand Assembly
Note: After assembly does not pull sticks out of the base. Sticks are
easily damaged.
WARRANTY POLICY
Customers should first contact their place of purchase to determine the
reseller’s warranty policy. Antop Antenna’s warranty will take effect after
the expiration of the reseller’s policy. Antop Antenna warrants its products
for a period of one (1) year from the original date of purchase. Warranty is
valid only with proof of purchase. Warranty does not apply to defects or
failures of the product caused by: neglect, misuse, negligence, accident,
abuse, mishandling, misapplication, alteration, modification, power outage,
unauthorized/unreasonable use, or any uncontrollable environmental damage.
RETURNS & REFUNDS
For any return, customers should first contact their place of purchase to
determine the reseller’s return policy. If purchased directly from Antop
Antenna or before returning directly to Antop Antenna, a Return Material
Authorization (RMA) number must be obtained in advance by contacting Antop
Antenna customer service via e-mail or telephone. Merchandise returned to
Antop Antenna must have an RMA number displayed on the box and a copy of your
proof of purchase inside the page. Absolutely no refund after 30 days of
purchase from Antop Antenna. A restarting fee of 15% may be deducted from any
refund, ask the representative for further details. Refund policy for US &
Canada customers only.
EXCHANGE & REPLACEMENT
For any exchange or replacement, customers should first contact their place of
purchase to determine the reseller’s policies One (1) Year limited
manufacturer’s warranty for exchange of product due to malfunction, failure or
defect, missing parts or components. Exchanges will be for the same item,
model, and/or SKU, within one (1) year of the original purchase date. A Return
Material Authorization (RMA) number must be issued by Antop Antenna prior to
returning any product or part. To obtain an RMA, contact Antop Antenna via
email or telephone.
SHIPPING & COSTS
The customer will be responsible for shipping costs of merchandise sent to
Antop Antenna. Please consult a customer service representative for details.
When shipping any item to Antop Antenna, please consider using a trackable
shipping method. Antop Antenna cannot be held responsible for lost or
misdirected shipments. Exchanged and retumed products must be sent to Antop
Antenna, RMA Department, 1650 S. Balboa Ave, Ontario, California 91761. To
receive a Return Material Authorization form Antop Antenna please send your
request to RMA Dept: Support@antopusa.com or to speak to Customer Service: via
telephone, M-F, 9 am to Spm (PST)
909-947-8883.
www.antopusa.com
ANTOP ANTENNA INC I
Tel. 909.947.8883
Email: Support@antopiisa.com