ANTOP AT-E107B Paper Thin Indoor TV Antenna with Smartpass Amplifier and LTE Filter Instruction Manual
- June 3, 2024
- ANTOP
Table of Contents
ANTOP AT-E107B Paper Thin Indoor TV Antenna with Smartpass Amplifier and LTE Filter
INSTRUCTION
Installation Instruction Manual
Your Paper Thin Indoor HDTV TV Antenna with Smartpass Amplified and SG LTE
Filter/ AT-E107B can be used anywhere indoors: at Home or even with your
Mobile Home/RV.
ANTOP’s New Generation Digital Technology allows you the flexibility to set up
your antenna in various locations and still receive a great digital reception.
Antop’s New Generation Digital Technology
- Smartpass Amplifier: all-in-one design allows easier connection, delivers correct balance between short- and long-range reception.
- SG LTE Cellular Filter: blocks 3G, 4G & SG signals for noise-free TV reception.
Following are instructions for indoor installation. Read through all instructions prior to beginning installation procedure.
Note: Although this antenna is great for indoor use, a higher mounting location positionedtowards the broadcast tower may result in better reception. Install the antenna as high as possible, and preferably with a clear path between the antenna and the TV station transmitters. Trees, buildings, mountains, etc., can all impact the performance of any antenna.
Installation
Secure the antenna with the provided double sided foam sticker on any non-
metallic structure, or mount on the wall with push pins.
Connection
Connect the coaxial cable attached to the antenna to the ANTENNNCABLE IN
connector on the back of the TV or converter box. Connect the USB cable
between the DC socket in the Smartpass Amplifier and an open USB port with DC
SV output on the back of the TV. If the TV does not have a USB port with DC SV
output, use the included power adapter to power the Smartpass Amplifier via
wall outlet.
| The
Smartpass Amplifier must be powered in order to function.
Push the smart switch On or Off and select the setting
with which more channels are received.
·Switch Off – The LED indicates yellow for normal amplification
·Switch On – The LED indicates green for stronger amplification
---|---
| Scan channels after each switching in the Smartpass Amplifier
---|---
Setting and Scanning
In the TV’s setup menu, set the input to “Antenna” or “Air”, then, set TV to
“Scan” for channels. Consult the TV manual for detailed instructions.
Locating and Placing
Test the antenna in multiple locations to find the best one before mounting
the antenna. A high location or positioning the antenna toward the broadcast
tower may result in better reception.
WARRANTY POLICY
Customers should first contact their place of purchase to determine the
reseller’s warranty policy.
Antop Antenna’s warranty will take effect after the expiration of reseller’s
policy. Antop Antenna, warrants its products for a period of one (1) year from
the original date of purchase. Warranty is valid only with proof of purchase.
Warranty does not apply to defects or failures of the product caused by:
neglect, misuse, negligence, accident, abuse, mishandling, misapplication,
alteration, modification, power outage, unauthorized/unreasonable use, or any
uncontrollable environmental damage.
RETURNS & REFUNDS
For any return, customers should first contact their place of purchase to
determine the reseller’s return policy. If purchased directly from Antop
Antenna or before returning directly to Antop Antenna, a
Return Material Authorization (RMA) number must be obtained in advance by
contacting Antop
Antenna customer service via e-mail or telephone. Merchandise returned to
Antop Antenna must have an RMA number displayed on the box and a copy of your
proof of purchase inside the package. Absolutely no refund after 30 days of
purchase from Antop Antenna.
A restocking fee of 15% may be deducted from any refund, ask representative
for further details. Refund policy for US & canada customers only.
EXCHANGE & REPLACEMENT
For any exchange or replacement, customers should first contact their place of purchase to determine the reseller’s policies. No upgrades or exchanges for different models or SKU’s. One (1) Year limited manufacturer’s warranty for exchange of product due to malfunction, failure or defect, missing parts or components. Exchanges will be for the same item, model and/or SKU, within one (1) year of original purchase date. A Return Material Authorization (RMA) number must be issued by Antop Antenna prior to returning any product or part. To obtain an RMA, contact Antop Antenna via email or telephone.
SHIPPING & COSTS
Customer will be responsible for shipping costs of merchandise sent to Antop Antenna. Please consult a customer service representative for details. When shipping any item to Antop Antenna, please consider using a trackable shipping method. Antop Antenna cannot be held responsible for lost or misdirected shipments. Exchanged and returned products must be sent to: Antop Antenna, RMA Department, 1650 S. Balboa Ave, Ontario, California 91761. To receive a Return Material Authorization from Antop Antenna please send your request to RMA Dept: Support@antopusa.com or to speak to Customer Service: via telephone, M-F, 9am to 5pm (PST) 909 947-8883.
www.antopusa.com
ANTOP ANTENNA INC I Tel. 909.947.8883 I
Email:Support@antopusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>