Jinhongmei JHM-A6 Bluetooth Headset User Guide

Jinhongmei JHM-A6 Bluetooth Headset

Specifications

• Product model: JHM-A6
• Sweat and water-resistant
• Bluetooth version: 5.3
• Bluetooth range: 10 meters
• Playtime (ANC off): Approximately 58 hours (Volume level 50%)
• Playtime (ANC on): Approximately 32 hours (Volume level 50%)
• Talk time (ANC off): Approximately 36 hours (Volume level 50%)
• Standby time (ANC off): Up to 500 hours
• Standby time (ANC on): Up to 50 hours
• Battery capacity: 500 mAh
• Charging port: USB Type-C
• Power input rating: 5V / 2A
• Charging time: 2.5 hours
• Net weight: 229 g
• FCC ID: 2BFOM-JHM-A6

Product Usage Instructions

Turning On and Pairing:

1. Press the POWER button for 2 seconds to turn on the headphones.
2. Go to your phone’s Settings, enable Bluetooth, and pair with JHM-A6.
3. The headphones will automatically connect to your phone when turned on.

Factory Reset:

If not pairing with your phone, press the power button quickly for 5 times to complete the factory reset. The headphones can be connected and used normally when powered on.

Button Functions:

• Power button: Press and hold for 2 seconds to turn on, press and hold for 3 seconds to turn off.
• ANC button: Press and hold for 2 seconds to play the next song.
• Volume+: Press briefly to increase volume.
• Volume-: Press briefly to decrease volume.

Charging:

Ensure charging completed/paired status by checking the LED indicators. Use a USB Type-C cable with a power input of 5V / 2A for charging. Charging time is approximately 2.5 hours.

FAQ

• Q: How do I activate the Voice Assistant feature?
  • A: Press the power button quickly for 3 times to turn on the Voice Assistant.
• Q: What is the Bluetooth range of the JHM-A6 headset?
  • A: The Bluetooth range is approximately 10 meters.

What in the Box

• Headphones
• Quick Start Guide
• USB Type-C cable

Things to keep in mind with Wireless Headphones

• Wireless headphones should not be used in extreme temperatures.
• Before using the headphones for the first time, make sure to charge them using a 5V, 24W or lower USB-C charger.
• The Max. The input Watt for AUX is 50 mw.

Pairing Wireless Headphones with your phone

1. Turn on the headphones by pressing the POWER button for 2 seconds. You’ll then hear a “Power-on” notification and the LED will flash blue and red alternately.
2. On your phone, go to Settings, turn Bluetooth on, and then pair with “JHM-A6”. Check your phone user guide to find out how to access Bluetooth settings.
3. Once paired, the headphones will automatically connect to your phone whenever you turn on the headphones.

Performing a factory reset

When the headphones are on and not paring with your phone, press power button quickly for 5 times to complete the factory reset. It can be connected and used normally when be powered on.

Components

Controls

Power button| —  Press and hold (for 2 seconds) to turn the headphones on.

—  Press and hold (for 3 seconds) to turn the headphones off.

—  Press quickly (for 2 times) to turn game mode on/off

—  Press quickly (for 3 times) to turn Voice Assistant on.

—  Press briefly to pause or resume playback.

—  Press briefly to answer or end the call.

—  Press and hold (for 2 seconds) to reject the call.

---|---
ANC button| —  ANC ON

—  Ambient sound

—  Ambient sound off

Volume”+”| —  Press and hold (for 2 seconds) to play the next song.

—  Press briefly to increase the volume.

Volume”-”| —  Press and hold (for 2 seconds) to play the previous song.

—  Press briefly to decrease the volume.

LEDS

Specifications

FCC Statement

• FCC ID: 2BFOM-JHM-A6

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>