Jinhongmei JHM-A2 Bluetooth Headset User Guide

Jinhongmei JHM-A2 Bluetooth Headset

Product Usage Instructions

Charging the Headphones

• Before using the headphones for the first time, ensure they are fully charged using a 5V, 24W or lower USB-C charger.
• The charging time is approximately 2 hours.

Turning On and Pairing the Headphones

1. Press and hold the POWER button for 2 seconds to turn on the headphones.
2. The LED will flash blue and red alternately, indicating the headphones are in pairing mode.
3. On your phone, enable Bluetooth and search for available devices to pair with the headphones.
4. Select the headphones from the list of available devices to complete the pairing process.

Controlling Playback and Calls The headphones offer various controls for playback and calls:

• * To play or pause music, press the POWER button briefly.

  • To answer or end a call, press the POWER button briefly.

Switching Modes and Adjusting Volume You can switch between different modes and adjust the volume using the following button combinations:

• * To switch between game mode and music mode, press the POWER button quickly twice.

• • To increase the volume, press the Volume+ button briefly.

FAQ

• Q: Can the headphones be used while exercising?
• A: Yes, the headphones are sweat and water-resistant with an IPX4 rating, making them suitable for workouts and exercise.

What’s in the box

• Headphones
• Quick Start Guide
• USB Type-C cable
• AUX audio cable

Things to keep in mind with Wireless Headphones

• Wireless headphones should not be used in extreme temperatures.
• Before using the headphones for the first time, make sure to charge them using a 5V, 24W or lower USB-C charger.
• The Max. Input Watt for AUX is 50 mW.

Pairing Wireless Headphones with your phone

1. Turn on the headphones by pressing the POWER button for 2 seconds. You’ll then hear a “Power-on” notification and the LED will flash blue and red alternately.
2. On your phone, go to Settings, turn Bluetooth on, and then pair with “JHM-A3”. Check your phone user guide to find out how to access Bluetooth settings.
3. Once paired, the headphones will automatically connect to your phone whenever you turn on the headphones.

Performing a factory reset

• When the headphones are on and not paired with your phone, press the power button quickly 5 times to complete the factory reset.
• It can be connected and used normally when powered on.

Components

Controls

Power button| Press and hold (for 2 seconds) to turn the headphones on.

Press and hold (for 3 seconds) to turn the headphones off.

Press quickly (for 2 times) to game mode/music mode switching

Press quickly (for 3 times) to turn Voice Assistant on.

Press briefly to pause or resume playback.

Press briefly to answer or end the call.

Press and hold (for 2 seconds) to reject the call.

---|---
Volume”+”| Press and hold (for 2 seconds) to play the next song.

Press briefly to increase the volume.

Volume”-”| Press and hold (for 2 seconds) to play the previous song.

Press briefly to decrease the volume.

LEDS

Specifications

FCC STATEMENT

FCC ID: 2BFOM-JHM-A2
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>