PROMASTER S7 Hidden Car Recorder User Guide

PROMASTER S7 Hidden Car Recorder

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• Radiation Exposure Limits: FCC approved for uncontrolled environment
• Minimum Distance: 20cm between radiator and body

Product Usage Instructions

Safety Precautions:

• Do not make any changes or modifications not approved by the manufacturer.
• Ensure the device is operated in compliance with FCC Rules.
• Maintain a minimum distance of 20cm between the device’s radiator and your body.

Installation:

1. Place the device on a stable surface.
2. Connect the necessary cables following the provided instructions.
3. Ensure proper ventilation around the device for optimal performance.

Operation:

1. Power on the device using the designated button or switch.
2. Follow the user manual for specific functions and settings.
3. Monitor the device during operation for any irregularities.

FAQ (Frequently Asked Questions):

• Q: Can I modify the device for additional features?
  A: No, any modifications not approved by the manufacturer can void the warranty and may impact device performance.

• Q: What should I do if I experience interference during operation?
  A: Ensure that the device is placed in a location with minimal external interference. If issues persist, contact customer support for assistance.

Note:
Please read this document in detail before installing and using the product, and keep it in a safe place.

Package contents

Security Information

Note:
Read the following important safety information carefully before use

1. Do not disassemble or repair the product yourself. This may damage the recorder, cause electric shock and The product warranty will be void.
2. This car recorder should avoid exposure to open fire or a long time in a humid and dusty environment, which may cause explosion, leakage and fire.
3. Due to local laws and vehicle safety considerations, please do not manually operate
4. The Car Recorder while driving.4. Please do not drop or hit this product, otherwise, it may cause damage to the internal components.5. For safety reasons, keep this product and its accessories away from children or animals to avoid accidents.
5. To avoid accidents.6. Do not put this product in a high-temperature state for a long time, such as exposure to the sun, which may lead to shell and internal components by damage.
6. It is recommended that the product be used at a temperature of -10°C~70°C.
7. recorder in the use of a period will lead to an increase in temperature, which is a normal phenomenon.8. The company is not responsible for any data, or content loss in the operation when you start using this stream media When you start to use this car recorder, you have agreed to the above statement.

Installation Instructions

1. Turn off the car engine.2. Insert the TF card into the recorder card slot. Note Please use a high-speed TF card (Class 10 and above), with a capacity of not less than 4GB.
2. Fix the recorder on the windshield of the car.4. Insert the car charger into the car cigarette lighter.5. Use the charging extension cable to connect the power connector of the recorder and the car charger. Note] The charging extension cable can be laid along the edge of the windshield of the car when wiring.6. Install the rear camera in the rear of the vehicle, pay attention to the direction when installing. Wiring can be laid along the roof of the vehicle. After the installation is completed, plug the rear plug into the recorder AV-IN.7. Adjust the lens position to ensure that the lens is level with the ground. 8. Start the engine and check whether the machine has been installed correctly. [ Note I When the machine is installed correctly, the system work indicator lights up; the machine starts into the recording state and the video indicator flashes.
3. Please pay attention to check whether the screen on the display is normal, if the display screen is an inverted image, please contact us in time.

Product Specifications

Mobile WIFI Playback

1. Select the common cell phone sweep or cell phone application store and search 6 frame probe to download and install.
2. Search WiFi through the phone to find WiFi name: S7** the beginning of the: 12345678
3. WIFI connection, the password default: 12345678 Open the APP, add the recorder, follow the steps to add successfully and enter the recorder preview interface
4. Common failures
5. Not on make sure the vehicle is in the ignition on state, manually long press the button to open wifi can not be connected: ensure that the recorder is in the open or have other cell phones connected (at the same time, only one cell phone can be connected)
6. Recorder can’t record: make sure whether the SD card is full or damaged, format the SD card or replace the SD card for investigation app screen is not smooth or not real-time: try to keep the phone background software less, and the phone closed to the recorder, you can close the APP restart (Wifi with the channel competition bandwidth, adjacent channels interfere with each other) The picture quality is not clear: check the recorder lens and car windshield whether there are stolen goods

Other notes

1. Key Function Description Power button/screen backlight on/off key Function 1: Power on/off function in the off state, short press the [Power button] to turn on the power of the machine, and the machine automatically starts working. In the power on state long press 3 seconds [power button] the machine automatically saves the video file and user settings and shuts down. Function 2: Short press the [Power button] to cycle through the front lens preview – rear lens Preview – APP QR code – time interface.
2. Interface Introduction
   Start the car engine, and the recorder automatically starts and turns on the video function.

1. Recording status:
   In normal video recording, a flashing red icon.

2. Recording icon: Machine off the recording function in the case of icons with a slash, open is no slash.

3. Clock:
   Clock display.

4. SD card status icon

5. WiFi status icon: WiFi default open state, there is a slash / means not connected to the cell phone App, cell phone app is connected after the slash.

6. ResolutionAt present, there are 2K and 1080P, which means 2560×1440 resolution and 1920×1080 resolution respectively. The default is 1080P, which can be modified through the APP menu.2.2 Recording loop The period of recording can be set to 1, 3, or 5 minutes. The default is 1 minute, can be modified through the APP menu.
   Note: When the SD card storage is full, the recorder will overwrite the earlier recorded images.

7. Time-lapse recording can be selected as off, 12 hours, or 24 hours, the default is off, when you choose to open when you choose to turn on the time-lapse recording if the car turns off, ACC disconnects, the recorder voice prompt “time-lapse recording is on”Prompt box, the video mode for time-lapse recording mode, 10s after the screen off. If the operation occurs in 10s or if the operation occurs in 10s or after the screen is turned off, the screen will be turned off again after 10s. When the ACC is powered on after the car is started again, the exit time-lapse recording is. The time-lapse interval (time-lapse frame rate) selection for time-lapse recording is selectable in the time-lapse interval of the APP menu. Buck board requirements: anti-surge protection, low power cut-off power supply, voltage with a minimum of 4.8V, the highest can not exceed 5.5V.maximum can not exceed 5.5V, the no-load maximum can not exceed 5.5V, ripple requirements within 100MV; Note: 1. This function needs to open the ACC function, otherwise no such function appears.2. Buck box dedicated, can not match another buck line, please know.

8. Scaling time intervalScaling time interval can choose 5 frames 1 second, 2 frames 1 second, 1 frame 1 second The default choice is 1 frame 1 second. 1 frame 1 second: 25 minutes of video can be recorded in one minute;2 frames 1 second: 13 minutes of video can be recorded in one minute;5 frames and 1 second: 5 minutes of video can be recorded in one minute; Note: This function needs to open ACC function, otherwise no such function appears.

9. Parking modeParking monitoring is divided into four modes: off, low, medium and high, the default is off, low medium and high indicating the vibration monitoring sensitivity.

10. Open the parking monitoring function, in the off state, if the car has a slight vibration, the recorder will automatically turn on the video and lock and lock the touch. This video is locked image will not cover, video 15 seconds after the Machine automatically shuts down.
    If the video recording process occurs during the boot operation, the locking video does not shut down after the end and cuts back to normal video mode. Note: Parking monitoring support sensitivity adjustment: high/medium/low, according to actual needs in the parking monitoring settings change the setting by yourself.

11. 2.6 Gravity sensorThis machine has a built-in collision sensor (G-sensor), gravity
    sensing is divided into four modes: off, low, medium and high. The default is off, low,
    medium and high indicating the sensitivity of vibration monitoring. Turn on the gravity
    sensor function, if the machine in the the machine is vibrating during the recording
    process (such as collision and so on, it can automatically lock the current video. Interface
    icon 1 shows yellow. Note: The collision sensor (G-sensor) supports sensitivity
    adjustment: high/medium/low, change the setting according to actual needs in the change
    the settings in the gravity sensor settings according to your actual needs.2.7 Recording

12. SwitchSwitch for recording sound.2.8 Formatting The formatting dialog box pops up, you can choose whether to fast format, the default is fast formatting, you can choose yes The default is Quick Format, and you can select Yes or No to confirm the formatting.

13. Restore Factory SettingsThe Restore Factory Settings dialogue box pops up, you can choose whether to confirm to restore factory settings, confirm will restore all the confirmation will restore function setting information, screen setting lens display and display screen position, playback interface display screen position and display mode.

Warranty and Service

Warranty Statement If the product is within the warranty period from the date of purchase, we will repair, replace or return the product free of charge, as the case may be, under normal use due to quality defects. We will repair, replace or retum the product to you free of charge, as appropriate. Unless otherwise provided by law The product or part to be replaced may not be new but will be of good performance and at least functionally equivalent to the original product or part. The product or part used for replacement may not be new but will perform well and be at least functionally equivalent to the original product or part. The warranty period begins on the date of initial purchase and is based on the invoice date. The warranty period starts from the date of the first purchase and is based on the invoice date. In the absence of a valid invoice, the warranty period shall commence on the date the product is shipped plus thirty (30) days. Invoice date the invoice date is later than the actual delivery date of the product, the warranty period will be calculated from the actual delivery date. The warranty period shall commence no later than Sixty (60) days after the date of shipment of the product. The repaired or replaced product will continue to be covered by the warranty for the remainder of the warranty period, but not less than 60 days after the date of delivery. The warranty shall continue for the remainder of the warranty period, but not less than thirty (30) days.

To claim a warranty, please contact the product seller or call the service hotline and follow our instructions. To apply for a warranty, you must provide an accurate, complete and legible valid sales invoice that is accurate, complete and legibly completed. The above warranty does not apply to failure or damage caused by. (a) misuse, abuse, or improper transportation, maintenance or storage, such as, but not limited to, under improper temperature, humidity or other improper environmental conditions (a) misuse, abuse, or improper transportation, maintenance, or storage, such as, but not limited to, use under improper temperature, humidity, or other improper environmental conditions (b) force majeure or accident, network or power outages, or other events beyond our reasonable control; (c) unauthorized repair or disassembly by non-authorized personnel; and (d) any third party product or service; (e) use of the product for purposes other than those specified or intended; (f) use of the product in a manner that is otherwise contrary to the product’s (f) use in any other manner that is contrary to the product’s instructions for use. normal wear and tear or aging that occurs during the use of the product. Scratches, scuffs and problems caused by the use of paints, solvents or other chemicals are not covered by the warranty. This warranty will be void if the original identification label is altered or destroyed. The integrity and availability of the product and accompanying materials are not warranted. You should inspect the product at the time of receipt and dispute any discrepancies. The foregoing is our entire warranty concerning the product and applies only within the jurisdiction of mainland China. This warranty gives you specific legal rights, and you may have other rights under the law, and nothing in this document affects your rights under the law. Nothing in this document affects your consumer rights that cannot be excluded or limited by law.

Product Warranty Information

Notes and instructions:

1. This table is not a description of product specifications and configurations, product specifications and configurations are based on the product prevail.
2. You should return the product properly packed and cooperate with the logistics provider to check. It is recommended to use the product’s Original packaging. If the returned product is not covered by the warranty, we will contact you to deal with it in the way you confirm.
   • Please make sure your contact information is accurate and your communication is smooth.
   • If the product is repaired or replaced due to your fault for more than
   • If the repaired or replaced product is not returned to you within two (2) months, you are deemed to have agreed that we will dispose of it appropriately.

Warranty Card

When purchasing a product, please fill in the following information completely and clearly, and stamp the seller’s seal to protect your legal rights and interests.

Legal Notice

1. Before installing and using the product, please read this document carefully, especially the relevant
   safety tips. Please take care of this document for future reference.

2. The illustrations and functional descriptions in this document are provided for illustration purposes only and are for reference only. The product is subject to the actual product. Some parts, functions and features mentioned in this document are for illustrative purposes only and may only apply to certain models. Some parts, functions and features mentioned in this document are for illustrative purposes only and may only apply to certain specific models of products. Unless otherwise expressly indicated, nothing in this document is intended to Unless otherwise expressly stated, nothing in this document is intended to describe the specific specifications and configurations of the product.

3. For product specifications and configurations, please consult the relevant specification documents for this product or request a copy of the product. Products, applications and content may be updated from time to time and their actual status may differ from this document.

4. Nominal storage capacity represents specifications only. The actual capacity available to the user is lower than the nominal value. The technical performance indicators mentioned are based on specific environment measurements.

5. Some products (depending on the product description) require network support to achieve full functionality. Some products (depending on the product description) require network support to achieve full functionality and may need to be used with smart devices such as cell phones.

6. The software and Internet services mentioned are used by the relevant license and/or service agreement. Use of network functions may consume data traffic and incur service fees, which are charged by your network service provider according to its standards.6. Certain web-based features of the Products may be supported by third-party web services, including content is not provided, guaranteed or supported by the vendor and may be terminated or changed at any time. Use of Third Party Services is subject to the terms of service and privacy policies of third parties, which may differ from those of the vendor. Please read such third-party terms carefully before using the relevant features and services. Third-party services and their content are not under the control of The vendor has no control over, and the vendor assumes no responsibility for, the third-party services or their content.

7. If you use software, peripherals or options provided with this product on other products or this product if you use software, peripherals or options on other products or on this product that are not recommended or permitted by the product specifications, you are solely responsible for their compatibility, reliability and legality, You are responsible for the compatibility, reliability and legality of such software, peripherals or options.

8. Nothing in this document shall constitute a modification of the product warranty policy.

9. This product is not designed for organ transplantation or other life support system applications, and in the event of a failure of the product in such applications Failure of the product may result in personal injury or death. 10. The portions of this document belonging to the licensor (if any) are used under license. No person may use the product in any manner whatsoever without the prior written authorization of the manufacturer. This document may not be reproduced, copied, abridged or compiled in any way, in whole or in part, by any person without the prior written authorization of the manufacturer, or compiled into a machine-readable format, or stored in any form in a retrievable system, transmit it over a wired or wireless network, or use it in any manner whatsoever without the prior written authorization of the vendor. Any person may not reproduce, transcribe, abridge, or compile the whole or any part of this document into machine-readable form, store it in any form in a retrievable system, transmit it over a wired or wireless network, or translate it into any form of writing.

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>