MOLOVO TM100 Tile Starter Master Kit Installation Guide
- June 1, 2024
- MOLOVO
Table of Contents
MOLOVO TM100 Tile Starter Master Kit
Specifications
- Product Type: Tile Installation Kit
- Recommended Surface: Clean, sound, solid, flat surfaces
- Adhesive Type: White thin-set
- Grout Type: Non-sanded for mosaic and glass tiles, sanded for other tiles
Surface Preparation
The installation surface must be clean, sound, solid, and flat before starting the installation process.
Layout Planning
Before installation, plan the layout of the tiles to minimize cuts. Determine the placement on the wall/floor for a more efficient installation process.
Cutting Tiles
When cutting tiles, use a tile cutter, tile nippers, or a wet saw with a diamond blade. Always wear protective gear to ensure safety.
Thin-Set Application
Follow the manufacturer’s instructions to select the appropriate adhesive. Use a notched trowel to apply the thin set evenly. Utilize spacers to maintain uniform grout lines.
Grout Application
For mosaic and glass tiles, use non-sanded grout. Adjust to sanded grout based
on the tile type. Seal natural stone tiles with a high-quality sealer post-
grouting. Refer to the grout/sealer manufacturer’s instructions for optimal
results.
INSTALLATION GUIDE
The following information is for the tile installation overview process. It is not a step-by-step instruction, each installation will vary depending on the materials and design. Please follow the instructions provided by the manufacturers.
SURFACE
The installation surface should be clean, sound, solid, and flat.
LAYOUT
Plan the layout of the tile you purchase and the placement on the wall/floor
before installation to minimize cuts to your tiles.
CUTTING
Use a tile cutter, tile nippers, or a wet saw with a diamond blade to cut
through the tiles if needed. Wearing protective gear is a must.
THIN-SET
Follow the instructions provided by the manufacturer to select the correct
type of adhesive. A white thin-set is recommended. Use the notched trowel to
apply the thinset and Use spacers to create a uniform grout line.
GROUT
Recommended use of non-sanded grout for all kinds of mosaic tiles and glass
tiles. However, Sanded grout should be depending on the tile you are
installing. Natural stone should be sealed with a high-quality sealer after
being grouted. Follow the instructions provided by the grout/sealer
manufacturer for the best results.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>