Guangxi CL-29 Wireless Karaoke Bluetooth Speaker User Manual

June 1, 2024
Guangxi

CL-29
Wireless karaoke
Bluetooth speaker
Guangxi CL-29 Wireless Karaoke Bluetooth Speaker Quick start Guide

Speaker Panel Function

Guangxi CL-29 Wireless Karaoke Bluetooth Speaker - KEY
PANEL

Microphone function

Guangxi CL-29 Wireless Karaoke Bluetooth Speaker - Microphone
function

Audio instruction

  1. Long press the power button for 2 seconds
  2. After the speaker is turned on, turn on the Bluetooth function of the mobile phone/computer search for the pairing name “CL-29” and connect with it,and the host will sound to indicate that the connection is successful
  3. Open the music APP to play music

Microphone instructions

  1. After the speaker is turned on, long press the microphone start button for 2 seconds

  2. The blue light of the microphone flashes and enters the state to be connected,When the blue light is always on, Indicates successful connection with host

  3. start karaoke,long press the microphone button “EFF” can eliminate the original singing voice;
    Short press the microphone key “EFF” to change the voice line with AI sound;
    Double-click the microphone button “EFF” and the volume button “VOL” or “VOL-” Can adjust the microphone/reverb/accompaniment volume

  4. The volume can be increased or decreased by clicking the microphone button “VOL” or “VOL-”

  5. To switch the songs, you can switch by long pressing the microphone button “VOL+” and “VOL-“

  6. When the microphone is not in use,you can short press the microphone power button to turn on the mute function,
    When you use it again,short press the power-on button to turn off the mute function

  7. Note!!! Do not close to the host when the microphone is turned on to avoid howling.

Charging matters

  1. When the power of the host is insufficient, a“ beep” tone will be issued to remind the charging, When the power is too low, the speaker will automatically shut down
  2. Before charging, please open the silicone cover on the back and charge with an appropriate data cable, The audio indicator blinks red, indicating that the battery is being charged
  3. The charging time takes 3-4 hours, and the indicator light automatically turns off after full charge
    Note!!!This product does not support fast charging devices, if the indicator is not on during charging, please check whether the charger is a fast charging device

Technical parameter

  1. Product model: CL-29

  2. Box material: ABS plastic + belt

  3. Bluetooth version: Bluetooth 5.2

  4. Effective receiving distance of speaker:≤10 meters
    Effective receiving distance of microphon:≤15 meters

  5. Loudspeaker power:20W

  6. Speaker battery capacity:1800Mah
    Microphone battery capacity:500Mah

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning : changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals