Kraus KVF-1200 Single Lever Vessel Faucet Installation Guide

INSTALLATION GUIDE
Arlo™ Single Lever Vessel Faucet KVF-1200

Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:

DO NOT RETURN TO THE STORE

Please contact our Customer Service Team at 1-800-775-0703 / [email protected]
Have the model number available, and retain a copy of your receipt with the purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Prior to Installation:

•  Make sure you have all the necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-7750703 for a replacement
• Turn off the hot and cold water lines at the angle stops and turn on the old faucet to release any built-up pressure
• Pre-drilled countertop hole size requirement: 1-3/8”(min)
• Max countertop thickness: 2 1/2”

Tools you will need:

Diagram and Parts List

A. Faucet Body
B. Plastic Washer
C. Metal Washer| D. Nut & Screws
E. Waterlines
F. Flange & Washer| G. Aerator
H. Aerator Key
I. Hex Wrench
J. Drain
---|---|---

Faucet Dimension

Installer Tip:

Shut off main water soppy before installing a new faucet

Step 1: Remove washers and nut

Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove the plastic washer (B), metal washer (C), and nut & screws (D) from the faucet (A).

Step 2: Install faucet

Before installation, ensure that the flange (F) is placed on the bottom of the faucet assembly (A). Place faucet (A) through the 1-3/8” holes in the countertop.
Secure the faucet (A) to the countertop using the plastic washer (B), metal washer (C), and nut & screws (D) provided.
Hand tightens the nut onto the end valve shank. Lock the nut into position by tightening the screws (D) with a Phillips screwdriver.

Step 3: Connect waterlines to the main valve

Attach waterlines(E) to angle stops and tighten until snug. Turn on angles stops and check for leaks (DO NOT TURN FAUCET ON) NOTE: Please make sure filter washers are installed before connecting to the main valve

Step 4: Install Press pop-up assembly Unscrew the nut (6) from the pop-up body (2), move over the tailpipe (7) and washer (5), then unscrew the coupling nut (4) and remove the washer (3).

Step 4: Install Press pop-up assembly

Place the washer (1) underneath the flange of the pop-up body (2). Slide the pop-up body (2) down through the drain hole on the vessel or basin. From underside. slide the washer (3) against the bottom of the vessel or basin, thread on the coupling nut (4), and tighten. Do not overtighten. Slide the nut (6) over the tailpipe (7).
Place the washer (5) into the nut and tighten. Do not overtighten. Cold W

Step 5: Flush faucet

After installing the faucet, remove the aerator (G) with included aerator key (H). Turn the water on for 30 seconds to remove any debris. Reassemble aerator (G ).

Replacement Parts

*Denotes faucet component color options:
CH – Polished Chrome
SFS – Spot Free Stainless Steel
ORB – Oil Rubbed Bronze
MB – Matte Black
BG – Brushed Gold
GR – Grey
BL – Black

Troubleshooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

Leakage under the
handle| Bonnet nut (5) has
come loose`| Remove the index (1). Loosen set screw (2) with hex wrench (15). Remove the handle (3).
Unscrew cap (4) (by hand only).
Tighten bonnet nut (5) with an adjustable wrench
Aerator drips or has
inconsistent water ow
pattern| Aerator (8) is dirty or
not seated properly| Unscrew aerator (8)
with aerator wrench (9)
and clean out debris
Water will not shut oFF
completely| The cartridge may need to be adjusted or replaced| Hot Water Cold Water Remove the index (1). Loosen
set screw (2) with a hex wrench (15). Remove the handle (3).
Unscrew cap (4) (by hand only).
Tighten bonnet nut (5) with an adjustable wrench. Remove the cartridge (7). Check for cracks
There is leaking from the
sink drain at the base of
the sink.| The sink has a rough or
irregular surface.| Apply additional silicone
sealant to the beveled side of the drain flange retighten and test for leaks
There is a low flow of water| The hose connectors are dirty.| turn off the water supply atPush water valve and unscrew the hose connectors from water supply lines. Clean the screen in the water lines with hot
water, removing any debris or calcium build-up.

Care & Maintenance

*To keep the product clean & shining, follow the steps below:

1. Rinse with clean water & dry with a soft cloth

2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners

3. Do not use a cloth with a coarse surface

4. Unscrew the aerator and clean when necessary

*This installation manual is subject to change without further notice.

Codes/Standards Applicable:

Faucet Warranty
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).
Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non- transferable.
Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.
Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon,e and stainless steel, etc) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user and is not transferable to a subsequent owner.

Restrictions

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recoveries of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.
This warranty does not cover Marine or Outdoor Installation.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

Commercial Warranty

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.
All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
[email protected]
If you are a plumbing contractor or trade professional please contact a Kraus
Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
[email protected]
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
[email protected]
In requesting warranty service, please be ready to provide:

1. Proof of purchase.
2.  A description of the problem.

Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance

IMPORTANT

Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information

REGISTER TODAY
http://www.kraususa.com/registration

www.kraususa.com
Toll-Free: 1.800.775.0703
© 2019 Kraus USA Inc.
REV. APR 08, 2021

References

• Kraus | Kitchen and Bathroom | Sinks, Faucets, and Accessories
• Care & Maintenance | Well-crafted products | Light maintenance.
• Kraus USA Self Help

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>