Guangxi Century 34E3R Neutral Monitor User Manual

Guangxi Century 34E3R Neutral Monitor User Manual

Precautions

Before using this product, please read this User Manual carefully and keep it well
Keep the monitor away from water sources Or damp places, such as bath rooms, kitchens, basements and swimming pools.

Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human injury Or device damage.

Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.

Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.

The range of the supply voltage of the monitor is printed on the label on the rear casing.
If it is impossible to determine the supply voltage, please consult the distributor or local power company.
If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
Please use a reliable grounded socket. Do not overload the socket, or it may cause fire or electric shock.
Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.
DO not pull or twist the power cable forcedly.
There is a polarizer layer (not a protective film) on the surface Of the screen. DO not peel it off, or the product may be damaged and the warranty will be invalid.

Package Content

Packing list

• Please check that the package Of the monitor contains all parts. If any part is lost, please contact the distributor.
• The color and shape of parts may vary with models. Figures here are for reference only.
• Cables supplied may vary with purchased products. Figures here are for reference only.

Installation

Installation of base

Note: During standing of the monitor, do not take out the monitor from foams, and do not pinch the liquid crystal screen with hand to avoid damage to the screen.

Installation of mount

Notes: To prevent the monitor on the mount from failing, please install it firmly and protect it fully.
Do not place or hang any object on the mount, and the using height of the mount should be less than 2 meters.

Adjustment of monitor

Instructions for use

Description of buttons

Explanation of indicators

Indicator light: Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source, no horizontal or vertical signal has been detected or power is low. Please ensure your computer is on and all video cables are fully inserted and/or connected.

Cable connection :

• The bottom interface configuration at the back of the monitor varies with products.
• Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.

OSD menu
Menu description

• The color and shape of the OSD menu of the actual computer may be slightly different from them shown in the figure.
• Specifications of the OSD menu may change with improvements of functions without prior notice.
  The on-screen display (OSD) menu can be used to adjust the settings of the monitor and is displayed on the screen after turning on the monitor and pressing the 4button.

OSD menu

• Functions of the monitor vary with models, and the functions in this manual are for reference only.

Specification

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Common troubleshooting

The following table contains general information about common monitor problems you might encounter and the possible solutions.

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(l) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>