baseus F02 Ergonomic Wireless Mouse User Manual
- June 1, 2024
- Baseus
Table of Contents
baseus F02 Ergonomic Wireless Mouse
Please read this manual thoroughly prior to use, and keep it for future reference.
Content
- Mouse x 1
- User manual x 1
- Warranty card x 1
- AA battery x 1
Specifications
- Name: Baseus F02 Ergonomic Wireless Mouse
- Model No.: BS-F02B
- Material: ABS+PC
- Transfer Distance: 10m
- Connection Type: 2.4GHz wireless+Bluetooth 5.0
- Bluetooth Version: Bluetooth
- Sensitivity: 1000/1600/2000/2400/4000DPI
- Response Frequency: 250Hz
- Operating Systems: Windows, HarmonyOS, Apple OS, Linux, Vista, etc.
The above data are measured by the Baseus laboratory, the actual use can be slightly different depending on the specific circumstances.
Functions
DPI/Bluetooth pairing button:
- press to switch the DPI settings, from 1 to 5 levels.
- Press and hold for 2s for Bluetooth pairing. (power indicator flashes)
- Note: Lv. l is l000DPI (indicator flashes once), Lv. 2 is 1600DPI (indicator flashes twice), Lv. 3 is 2000DPI (indicator flashes 3 times), Lv. 4 is 2400DPI (indicator flashes 4 times), Lv. 5 is 4000DPI (indicator flashes 5 times).
- Note: Default setting is l000DPI.
- Mode switch: toggle to switch the connection mode/turn off.
- Power indicator: lights up blue when the battery level is 10-100%, or red when it is under 10%, when the battery level is 1 %, it flashes red for 10 times and then the product automatically shuts off.
- Note: The power indicator stays off when the mouse is in sleep mode.
User Instructions
Battery Installation
Open the cap and install the batteries inside (make sure the polarities are
connected properly), and close the cap.
2.4G Mode Connection
- Take out the USB receiver on the bottom and insert it into the device.
- Switch the connection mode to 2.4G, and click or move the mouse until the cursor appears on the screen.
Bluetooth Connection
- Switch the connection mode to Bluetooth, press and hold the DPI button for 2s to enter the pairing mode, during which the power indicator flashes quickly.
- Turn on the Bluetooth of the device and search for the model name “Baseus F02 Mouse” to pair.
Shortcut Button Customization
- Scan the QR code and download the Baseus APP, register, and log in.
- Switch the mouse to Bluetooth mode, click and hold both left and right buttons for 3s to enter the pairing mode, during when the power indicator flashes quickly and stays on.
- Turn on Bluetooth on your phone, search for “Baseus F02 Mouse” to link the mouse to the APP.
- Choose a shortcut function and click “Save Setting” to enable it, you can use the function after the mouse is connected back to the computer automatically.
Attention
- The product contains battery inside, please keep it away from fire sources, and DO
- NOT expose the product to high temperature, strong sunlight or strong magnetic field.
- DO NOT attempt to personally disassemble or modify the product under any circumstance. Contact us for support.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used by the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Warning
Please keep the product away from the fire source and do not dismantle or
repair the product by yourself. Please contact our customer service for help
if you have any problem with the product.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Shenzhen Baseus Technology Co., Ltd. is
under license. Other trademarks and trade names are those of their respective
owners.
Maximum output power: 4.76dBm Frequency band 2.4G band (2.402G Hz-2.480G Hz)
https://www.baseus.cn
service@baseus.com
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang
Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen Executive
Standard: GB 4943.1
Hotline: +86-4000-712-711
Website : www.baseus.com
Official After-sales E-mail Address :
service@baseus.com
PB4750Z-P0A3
1100010179
Designed by Baseus
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>