Shenzhen Xft Medical XFT-2003P Hand Rehab System User Manual

Shenzhen Xft Medical XFT-2003P Hand Rehab System

Precautions

1. To avoid harm or loss to users due to improper use, please read the
2. If you Product have Manual any questions carefully before before or use for during correct use, it is use. recommended to consult a doctor or manufacturer.
3. Do not disassemble, repair or modify this product without authorization.
4. Don’t use the product when charging.
5. Please put this manual in a place where users can refer to it at any time and keep it properly.

List of Symbols

Product Overview

XFT-2003P EMG Armband is an EMG detection electronic product, it can detect the real-time EMG signal of user’s limb. The weak EMG signal is collected through the surface electrodes on the user’s limb. After filtering, the signal expressed by the user’s autonomous EMG and muscle strength. The product is equipped with Bluetooth function, which can be used with XFT-2005A Rehabilitation Robot or APP.

Product Introduction

Product composition, illustration and button Product structure and composition: XFT-2003P consists of a host, a charging cable, and APP.

It has only one button ( Power button).
Power Button: press and hold 1 second to turn on the device; press and hold 1 second to turn off the device.
Charging port: it is used to charge the armband.

Accessories

APP

lcon:
Software Name : HandRehab
Software Model: XFT-2003E/2003EA/2003P

Operation Environment

System Environment : iOs 9.0 and above; Android 6.0 and above.
Network Conditions: Bluetooth.
Software version query path: search for the APP name HandRehab in the App Store, and enter the APP details page to view the version number.
Please refer to XFT-2003P HandRehab Help for detailed operation and precautions of the APP.

Technical Specification

Product Name: EMG Armband
Product Model: XFT-2003P
Product Net Weight: 52gt10g
Size: 326x64x 16mm (t3mm)

Host Operating Environment:

Temperature: 5C-40’C
Relative humidity: s 80% (non-condensing)
Atmospheric pressure: 86kPa-106kPa

Host Storage and Transportation Environment

Temperature: -20’C-55’C
Relative Humidity: s93% (non-condensing)
Atmospheric Pressure: 70kPa-106kPa

Operation Instruction

1. Peel off the transparent film from the metal electrodes.
2. Wear the EMG Armband on the arm. Please make sure that the metal electrodes are attached to the extensor muscles of the arm. When wearing, ensure that the electrodes are in close and even contact with the skin.
3. Press the power button to turn on the EMG Armband.
4. Connect with the Biofeedback Hand Rehab Glove System orAPP through Bluetooth to start treatment.
5. After the training, press the power button to turn off the host.
6. Remove the EMG Armband from the arm.
7. Clean metal electrodes and equipment with a soft cloth and store them.

1. Peel off the transparent film from the metal electrodes.
2. Wear the EMG Armband.
3. Press the power button to turn on the device.
4. Connect with the Rehabilitation Robot or APP through Bluetooth.
5. Press the Power button to turn off the device.
6. Remove the EMG Armband.
7. Clean the metal electrodes.

Charging the EMG Armband

1. Take the charging cable out of the package.
2. Insert the USB of the charging cable into the USB port of the power adapter.
3. Connect the charging cable to the charging port of the armband.
4. When the device is charging, the power icon of the armband will be solid red.
5. After the device is fully charged, the power icon of the armband will be solid green. Please unplug the charging cable at this time.

1. Take the charging cable out of the package.
2. Connect the charging cable with the power adapter.
3. Connect the charging cable and the armband.
4. Start charging.
5. Charging completed.

Status indicator

Automatic Shut-down

The EMG Armband will automatically shut down in the following two situations:

1. The electrode loose and it has not recovered within 3 minutes.
2. The Bluetooth connection is disconnected and not restored within 1 minute.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning th- e equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
FCC ID:2AS212003P

After-sales Service

1. The XFT-2003P EMG Armband is provided with two-year warranty starting from the date of purchasing.
2. We will not provide free repair services for the malfunctions caused by the following behaviors:
   • Disassemble or modify the product without authorization.
   • Accidentally blow or drop the product during use or transportation.
   • Lack of reasonable maintenance.
   • Operate not according to the instruction.
   • Repaired by an unauthorized repair store.
3. When asking for warranty service, please show the purchase invoice and warranty card.
   • It is charged according to the stipulation for the repair service out of warranty.
   • Please contact XFT when asking for warranty service.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>