SECOMP 21131191 8 Port Nway PoE Fast Ethernet Switch Installation Guide
- June 9, 2024
- SECOMP
Table of Contents
SECOMP 21131191 8 Port Nway PoE Fast Ethernet Switch
Introduction
This switch provides 8 10/100M ports. It was designed for easy installation and high performance in an environment where traffic is on the network and the number of users increases continuously. It consists of 8 PSE/PoE ports. That can solve the limitation of the power outlet location and offer the system designer a flexible solution to locate the network device everywhere. The compact rigid desktop size was specifically designed for small to medium workgroups. It can be installed where space is limited; moreover, it provides smooth network migration and easy upgrade to network capacity.
Package Contents
Before you start to install this switch, please verify your package that contains the following items:
- One PoE Fast Ethernet Switch
- One Power Cord
- One Quick Installation Guide
Note: If any of these items is found missing or damaged, please contact your local supplier for replacement.
Key Features
- 8 Port 10/100M Nway (Auto-negotiation) Switch
- 8 PSE/PoE function ports
- Supporting the power Max. 30 W for each PSE/PoE port
- 11” Desktop size with metal case
- Can be installed in a 19” cabinet by rack-mount kits
- Auto-learn of networking configurations
- Auto-detect full/half-duplex modes for any port
- Dedicated full-duplex 200Mbps bandwidth
- Store-and-Forward switching methods
- IEEE 802.3x flow control for full-duplex and back-pressure flow control for half-duplex
- Non-blocking & Non-head-of-line blocking full wire speed forwarding
- Auto-MDI/MDI-X function for any port
- Smart plug & play
Front Panel (LEDs)
LED Indicators of 8 Port PoE 10/100M Switch
LED | Status | Description |
---|---|---|
Power | On | Power is on. |
Off | Power is off. | |
LINK/ACT | On | Port is for connection. |
Off | No connection. | |
Flashing | Data is transmitting or receiving | |
PoE | On | Port is linked to Power Device |
Off | No Power Device is connected |
Connections
Switch/Hub to this 8 Port PoE Fast Ethernet Switch
This switch provides automatic crossover detection functionality for any port.
It is simple and friendly to up-link to another switch without crossover
cable.
PC/Other devices to this 8 Port PoE Fast Ethernet Switch
Via a twisted pair cable straight through, this switch can be connected to
PCs, servers and other network devices.
Power Device to this 8 Port PoE Fast
Ethernet Switch and getting 48~56V power source through Cat. 5 cables Using
Cat. 5 twisted-pair cable to connect Power Device to the port 1~8 of this
switch, and then this switch will supply 48~56V power to Power Device over
Cat. 5 twisted-pair cable. Please be noted Power Device should also comply
with IEEE 802.3af/ IEEE 802.3at standard.
Rear Panel (Power)
AC input
AC input (100~240V/AC, 50~60Hz) UL Safety
Technical Specifications
Standards| IEEE 802.3af IEEE 802.3at
IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX
IEEE 802.3x Flow control
---|---
Features| Number of Ports:
8 PSE/PoE+ Ports MAC Address: 4K
Buffer Memory: 1.5 Mbits
Method: Store and Forward
Filtering/ Forwarding Rates| 100Mbps port – 148,800pps 10Mbps –
14,880pps
Transmission Media| 10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP
LED
Indicators
| Per Port: LINK/ACT, PoE ACT/Status
Per Unit: Power
Power Input| 100~240V/AC, 50~60Hz to 48-56 VDC/130W
Power Output| 48-56VDC/ 30W Max. Per Port
PoE Mode| Mode A
Power Consumption| ** 130 Watts (Max)
Dimensions| 266 × 160 × 44 mm (L x W x H)
Weight| 1.6 kg
Operating Temperature| 0 to 45℃
Storage Temperature| -20 to 85℃
Humidity| 10 to 90% RH (non-condensing)
Certifications**| FCC Class B, CE mark Commercial
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>