LONDON SIP J23 Vac One Air Brewer Instruction Manual

June 1, 2024
LONDON SIP

LONDON SIP J23 Vac One Air Brewer

VacOne Air Brewer
Thank you for purchasing The London Sip VacOne Air Brewer. Please read the following manual carefully before using your VacOne to ensure proper use and care. If you have an issue with your product, please contact London Sip at 1-800-467-6408 to speak with a product specialist. We would appreciate the opportunity to resolve any issues you may have before returning the product to the retailer.

A New Way to Brew
The VacOne Air Brewer is a unique 2-in-1 coffee and cold brew maker that utilizes patented technology to brew delicious coffee and cold brew in minutes. Our exclusive Vac-Tec technology uses a high-pressure vacuum, allowing you to brew both hot coffee and cold brew at the touch of a button. Enjoy a smooth and velvety cup of hot coffee in under a minute, or a glass of sweet and intense cold brew in only 4 minutes.
Out of the box, the VacOne contains everything you need (minus the water and coffee) to start brewing amazing coffee or cold brew. Simply add coffee grounds and water to the chamber, let the coffee steep and press the button on the top of the chamber.

Charging Your VacOne
Use the included micro-USB cable to charge your VacOne. The charging port for the VacOne can be found below the yellow cap on the underside of the water chamber. Unthread the yellow cap, plug the micro-USB cable into the charging port and plug the other end of the cable directly into the USB port of your computer. When plugged in, a red LED light will appear below the on/off button indicating that the VacOne is charging. Once fully charged the LED light will turn off.

Note : The VacOne will charge in approximately 2 hours. A full charge can brew up to 100 times.

Making Hot Coffee

LONDON SIP J23 Vac One Air Brewer 2

  1. Place the VacOne onto the glass carafe.

  2. Add 4 scoops of fine-medium ground coffee (approximately 25g) into the VacOne.
    Note : Use a grind setting that is about 30-35% from the finest setting on your grinder.

  3. Add hot water to the line on the inside edge of the chamber that corresponds to the coffee strength that you prefer. Add to the top line (400ml) for lighter coffee, to the middle line (350ml) for normal strength coffee, or to the bottom line (300ml) for strong coffee.
    Note : Water falling into the carafe while pre-infusing is normal.

  4. Stir the coffee with the included stir stick so that the grounds fall to the bottom of the chamber.

  5. Allow the coffee to steep for one minute (counted from the first pour of water) and press the button to start the air brewing process.

  6. When the chamber is empty press the button again to stop air brewing.
    Note : Some experimentation may be necessary to achieve what you consider your ideal cup of coffee. The grind size and amount of water can be adjusted until you achieve your ideal flavor profile.

Making Cold Brew

LONDON SIP J23 Vac One Air Brewer 3

  1. Place the VacOne onto the glass carafe.

  2. Add 5 scoops of finely ground coffee (approximately 32g) into the VacOne.
    Note : Use a grind setting that is about 20-25% from the finest setting on your grinder.

  3. Add room temperature water to the bottom line (300ml) on the inside edge of the chamber.
    Note : Water falling into the carafe while pre-infusing is normal.

  4. Stir the coffee with the included stir stick so that the grounds fall to the bottom of the chamber.

  5. Allow the coffee to steep for four minutes (counted from the first pour of water) and press the button to start the air brewing process.

  6. When the chamber is empty press the button again to stop air brewing.

After Brewing

  1. When brewing is complete let the VacOne sit for a few seconds for pressure to dissipate.
  2. Use the stir stick to break the coffee crust and fully dissipate the vacuum in the glass carafe. You will hear a hiss when the vacuum releases.
  3. Remove the VacOne from the glass carafe by holding the handle of the glass carafe and pressing up on the VacOne with your thumb.

Tips For a Successful Brew
The process for making coffee in your VacOne is simple but there are a few things to keep in mind to ensure a successful brew.

  • Make sure that the filter assembly is securely in place. This can be checked by pressing down on the filter assembly at the bottom of the water chamber with your fingers.
  • Ensure that the battery is charged and that the yellow cap covering the charging port is threaded tightly.
  • When placing the VacOne onto the glass carafe make sure that the seal is not distorted against the carafe or dislodged from the body of the VacOne.
  • Never attempt to force the glass carafe open after brewing. Always dissipate the vacuum created during the brewing process before attempting to remove the VacOne from the glass carafe.
  • Never use boiling water. Coffee is best when brewed between 195°F and 205°F (91°C-96°C).
  • Do not place the VacOne in the dishwasher.
  • Do not place the VacOne in the microwave.
  • Ensure that the product has dried out completely after washing and before storing.
  • To prevent damage when cleaning, do not use abrasive pads, harsh chemicals, or other cleaning agents.
  • FRAGILE – Handle the carafe with care to avoid breaking/shattering the glass.

Cleaning Your VacOne ****
To clean your VacOne loosen the coffee grounds with the stir stick and dump the coffee grounds into the trash. Rinse the upper chamber under the faucet of your sink, repeating as needed to remove the remaining coffee grounds. If there are coffee grounds stuck to the filter use the stir stick to gently loosen the grounds and continue rinsing. There is no need to remove the filter from the chamber when cleaning. If you notice that coffee oils and other residue is starting to build up you can wash the chamber with soap, making sure to thoroughly rinse to remove all soap residue. If necessary, you can also remove the filter for a thorough cleaning from time to time.

Troubleshooting and More
For troubleshooting tips, how-to videos and additional VacOne recipes please visit our website.

Product Specifications

  • Model Number: V1AB
  • Chamber Construction: Plastic
  • Carafe Construction: Borosilicate Glass
  • Filter Construction: Stainless Steel w/ plastic housing
  • Power Source: 3.7V / 1000mAh Rechargeable Lithium-Ion Battery
  • Charging Time: 2 hours
  • Brews per Charge: 100
  • Dishwasher Safe: No – Handwash only
  • Weight: 17.6 oz / 499 g
  • Dimensions: 4.7 x 4.7 x 7.5 in. / 120 x 120 x 191 mm
  • Included Accessories: Reusable metal filter, glass carafe, silicone coaster, stirring stick, measuring spoon, USB cable.

Product Support
Email support:[email protected]
Phone support: 1-800-467-6408

Lifetime Limited Warranty
Your product is warranted to be free of manufacturing defects for the lifetime of the product. This warranty does not cover breakage, spare or consumable parts, misuse, abuse, or general wear and tear. The London Sip’s liability is limited to two (2) times the cost of the product. The London Sip., Minneapolis, MN, USA. All rights reserved. The London Sip, The London Sip logo and other London Sip marks are owned by The London Sip and may be registered.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LONDON SIP User Manuals

Related Manuals