ROCAM CR1023 Digital Alarm Clocks for Bedrooms Instructions

ROCAM CR1023 Digital Alarm Clocks for Bedrooms

Product Information

Specifications

• Product Name: ROCAM R
• Manufacturer: Made in China
• Version: 1.0
• Power Sources: 2pcs 1.5V AAA size batteries (not included) or DC adapter (100~240V AC)
• USB Charging Ports: Type-C and USB

Chapter 1: Location of Controls

The product features the following controls:

1. DISPLAY DIMMER KNOB
2. TIME/DST BUTTON
3. 12/24H BUTTON
4. ALM ON/OFF BUTTON
5. ALARM 1 BUTTON
6. ALARM 2 BUTTON
7. VOLUME KNOB
8. TYPE-C CHARGING PORT
9. NIGHT LIGHT
10. SPEARK
11. DC IN JACK
12. USB CHARGING PORT
13. BACKUP BATTERY COMPARTMENT
14. DST INDICATOR
15. PM INDICATOR
16. AM INDICATOR
17. LOW DIMMER INDICATOR
18. ALARM 1 INDICATOR
19. ALARM 2 INDICATOR
20. TOUCHSCREEN SNOOZE / NIGHT LIGHT

Chapter 2: Power Sources

1. Install 2pcs 1.5V AAA size batteries to the proper terminals in the battery compartment to memorize the time setting and the alarm will ring in case of power outage. Note: Batteries are not included and don’t support time display or any other functions.
2. Connect the adapter line to DC jack, then plug into a 100~240V AC wall power outlet.

Chapter 3: Time Setting

1. Press the TIME/DST button once, and the hour display indicator starts flickering on the screen.
2. Press the + or – button to set the hour, and press TIME/DST to confirm.
3. After step 2, the minute display starts flickering. Press + or – button to set the minute.
4. Press TIME/DST button to save time or wait for another 10 seconds to confirm automatically.

Chapter 4: Alarm Setting

1. Press the ALM ON/OFF button once, and the alarm indicator light turns on and flickers along with the hour display on the screen.
2. Press + or – button to set the hour, and press ALM ON/OFF to confirm.
3. After step 2, the minute display starts flickering. Press + or – button to set the minute.
4. Press ALM ON/OFF button to save setting or wait for another 10 seconds to confirm automatically.

Alarm Ring Volume Setting

There are 7 volume levels. Rotate left to turn up and right to turn down. Adjust the volume to your preference.

Turn off Alarm

1. Press ALM ON/OFF button to temporarily turn off the alarm for 9 minutes. The alarm will ring every next 9 minutes.
2. Press ALM ON/OFF button to turn off the alarm for 24 hours. The alarm indicator is still on, which means the alarm is still activated and will ring after 24 hours.
3. When the alarm is off, press + or – button to activate the alarm. The setting will be the same as the last time.

Cancel Alarm

1. Hold press ALM ON/OFF button to turn off alarm 1 and alarm 2 permanently. The corresponding indicators will turn off.
2. Hold press ALM ON/OFF button to turn off alarm 1 permanently. The indicator will turn off.
3. Hold press ALM ON/OFF button to turn off alarm 2 permanently. The indicator will turn off.
4. If alarm 1 goes off, then hold press + or -, just turn off alarm 1 permanently. The indicator will turn off.
5. If alarm 2 goes off, then hold press + or -, just turn off alarm 2 permanently. The indicator will turn off.

Chapter 5: Night Light

Touch the TOUCHSCREEN SNOOZE / NIGHT LIGHT button to turn on the night light. Press the button again to turn off the night light.

Chapter 6: Dimmer

Rotate the DIMMER button to adjust the display to a comfortable brightness. There are 7 dimmer levels. Rotate left to turn up and right to turn down. Adjust the brightness according to your preference.

FAQ

• Q: Where can I contact the product experts?
  • A: You can contact our experts at lucy@yelaw.net.
• Q: What is the website for more information about the product?
  • A: You can visit our website at http://www.yelaw.net for more information.

Digital Alarm Clock with USB Charger

LOCATION OF CONTROLS

• 1. DISPLAY DIMMER KNOB 3. 12/24H BUTTON
• 5. ALARM 1 BUTTON
• 7. VOLUME KNOB
• 9. NIGHT LIGHT
• 11. DC IN JACK
• 2. TIME/DST BUTTON
• 4. ALM ON/OFF BUTTON 6. ALARM 2 BUTTON
• 8. TYPE-C CHARGING PORT 10. SPEARK
• 12. USB CHARGING PORT
• 13. BACKUP BATTERY COMPARTMENT
• 14. DST INDICATOR
• 15. PM INDICATOR
• 17.LOW DIMMER INDICATOR 19. ALARM 2 INDICATOR
• 16. AM INDICATOR
• 18. ALARM 1 INDICATOR
• 20. TOUCHSCREEN SNOOZE / NIGHT LIGHT

POWER SOURCES

1. Install 2pcs 1.5V “AAA” size batteries to the proper terminals in the battery compartment to memorize the time setting and the alarm will ring in case of power outage.
   • NOTE: Batteries are not included and don’t support time display or any other functions
2. Connect the adapter line to DC jack , then plug into a 100~240V AC wall power outlet

TIME SETTING

1. Press the button once, and the hour display indicator light starts flickering on the screen.
2. Press or button to set the hour, and press to confirm.
3. After step 2, the minute display starts flickering, press or button to set the minute.
4. Press the button to save time or wait for another 10 seconds to confirm automatically.

12H/24H time format setting

• Hold press button to change 12H/24H time format

ALARM SETTING

1. Press the button one time, the indicator light on and flickering along with hour display on the screen.
2. Press or button to set the hour, and press to confirm.
3. After step 2, minute display start flickering, press or button to set the minute.
4. Press button to save setting or wait for another 10 seconds to confirm automatically.

The ALARM 2 setting same as the ALARM 1

Alarm Ring Volume Setting There is 7 volume level s, rotate left to turn up, right to turn down. Adjust the volume for your preference

Turn off Alarm

When alarm goes off:

1. Press the button to temporarily turn off alarm for 9 minutes. Alarm will ring every next 9 minutes.
2. Press button to turn off alarm for 24 hours. The alarm indicator or is still on, which means alarm is still activated and will ring after 24 hours.
3. When alarm is off, press or button to active the alarm, setting will be the same as last time

Cancel Alarm

1. Hold press button to turn off alarm1 and alarm 2 permanently. And corresponding indicator and will turn off.
2. Hold press button, just turn off alarm 1 permanently, indicator will turn off.
3. Hold press button, just turn off alarm 2 permanently, indicator will turn off.
4. If alarm 1 goes off, then hold press or , just turn off alarm1 permanently , indicator will turn off .

USB & TYPE-C CHARGING

Plug charging cable into a device such as phone or tablet. The device can charge both your phone or tablet at the same time. The maximum charge current is 1 Ampere.

• http://www.yelaw.net
• lucy@yelaw.net

References

• ROCAM – ROCAM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>