Veise VE33B Fingerprint Smart Locks Installation Guide
- June 1, 2024
- Veise
Table of Contents
Veise VE33B Fingerprint Smart Locks
Install the lock
Scan the QR code to find the installation guide video for VE33 series. Before you return the lock, please contact our customer support, You are rest assured that you will get a solution.
Attention
The following notes must be followed during the installation, or it might
cause abnormal operation or damage to the device.
-
Make sure the latch bolt is fully retracted (in the unlocked position).
-
The lock fits on the door hole of 1-1/2″ (38mm). It requires removing the spacer to install it on the door. Measure the diameter of the hole in the door.
-
The wire should not be squeezed when it goes through the latch.
-
Keep the exterior and interior assemblies aligned and parallel to the door edge. Keep the latch bolt parallel to the door edge.
-
There’s a button hidden at the bottom of the key override, to remove the key override, pull the exterior assembly from the bottom and rotate from the top to open it.
-
Pull the exterior assembly from the button.
-
Rotate from the top to open it, insert the key and rotate to unlock.
Download the App
- Scan the QR code to download the KK Home App.
- Create an account and log in the KK Home App.
- Scan the QR code or manually enter the ESN located on the back of the interior assembly, and complete the pairing steps by following the in-app instructions.
Contact
- Whatever the product issues,.
- support@iveise.com
- +1(855)400-3853
- (Monday-Friday, 9:00 a.m.–5:00 p.m. EST)