STEELDIGI PS5-HC01 Azure Hammock Charging Station User Manual

STEELDIGI PS5-HC01 Azure Hammock Charging Station

Product Information

The PS5-HC01 is a smart charging station with a headphone holder designed for PS5 controllers. It is compatible with the PS5 controller and is equipped with a USB Type-C power input port. The charging time for the controller is 2.5 hours and the input voltage is DC5V. The charging station is equipped with indicator lights to indicate the charging status of the controller. The red light indicates charging, the blue light indicates fully charged, and the indicator light goes off when the charging is complete. The charging method is contact charging and the input current is 1A. The charging station has over- voltage and under-voltage protection and will not charge if the voltage exceeds 5.7V or falls below 4.2V. It also has over-current protection and will stop charging if the maximum current limit of 750mA is exceeded.

Product Usage Instructions

1. Connect the charging station to a power source using the USB Type-C cable.
2. Place the PS5 controller on the charging station with the connectors aligned.
3. The red LED light will turn on to indicate that the controller is charging.
4. When the controller is fully charged, the red LED light will turn off and the blue LED light will turn on.
5. If the maximum current limit of 750mA is exceeded, the charging port will be over-current protected and charging will not be allowed. The corresponding charging indicator will flash quickly.
6. If the voltage exceeds 5.7V or falls below 4.2V, the charging stand will close all charging ports, and all charging indicators will flash. The charging function needs to be restored after power off.
7. To hang the PS5 on the wall, use the screws and wall plugs provided in the product parts list diagram.
8. Use the headphone holder to store your headphones.

Appearance

1. Controller connect charging port
2. Controller charging and full charged indicator light
3. Power input
4. Stretchable headphone holder

Compatible with

• PS5 Controller.

Function

• The product adopts single-chip microcomputer control charging, DC TO DC synchronous boost and stable output voltage charging, low temperature don’t generate heat, and the temperature is below 45 degrees.
• Compatible with a variety of power adapter on the market, environmentally friendly and convenient.
• Product built-in design of software and hardware multiple protection; current limit, voltage limit, over current protection, low voltage protection, high voltage protection, short circuit protection.
• The product use the slot contact charging method, simple and convenient to operate, and solves the problem of controller difficult alignment.
• The product input has a protection chip, so that the non-compliant power adapter can supply high voltage without burning the device.
• Convenient for placement and storage; the holder of this product adopts a retractable design, which is beautiful and don’t take up space.
• The use of the product can not only be fixed on the wall, but also can be hung on the side of the PS5 console.
• The product adopts a single controller to store and place it on the stand for charging, at the same time it can hang headsets for storage.

Specification

blue light is on.
Not charging: The indicator light is off.| Over current: The corresponding charging indicator light flashes.
Over voltage, under voltage: All charging indicator lights flash.| Waiting for charging: Charging indicator light flashes slowly.

Operation

• When the controller charging, the red LED light is on, indicating that it is charging; if the controller is full charged, the red LED light off and turn to blue.

Full charging detection

• When the charging current of the controller is less than 140mA for 2 seconds, it is considered that the controller is fully charged and the charging indicator light turn to blue.

Over current protection

• The normal charging current is about 750mA,if the maximum current limit is exceeded, the charging port will be over-current protected and charging is not allowed, the corresponding charging indicator will flash quickly. Resume charging function after power off.

Input voltage detection

• When the power input voltage exceeds 5.7V, it is considered to be over-voltage, the charging stand will close all charging ports, and all charging indicators will flash; the charging function needs to be restored after power off.
• When the power input voltage is less than 4.2V, it is considered to be under-voltage, the charging stand will close all charging ports, and all charging indicators will flash; the charging function needs to be restored after power off.

Product parts list diagram

Assembly and use diagram

1. Hanging PS5 console assembly drawing
2. Wall-mounted assembly drawing

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>