Category You can specify the desired category and select a channel.

Direct Tuning
Parental Contr.

1. Select a category. 2) Select a channel.
   Display the direcchannel search screen. (P.8) See Parental Control (P.9).

Parental Control

Parental Control is a feature that provides the user with the ability to prevent unauthorized access to mature content and user selected channels.

Ñ Activating parental control
1 Press < > to display the function menu.
2 Turn the volume knob to select [Parental
Contr.], then press the knob.
3 Enter the initial parental code (“1111”)

1. Turn the volume knob to select a number, then press the knob.
2. Repeat step 1 until the parental code is completed.

Ñ Parental Lock channel selection

1 Press < > to display the function menu.

2 Turn the volume knob to select [Parental
Contr.], then press the knob.

3 Enter the initial parental code (“1111″)

4 Turn the volume knob to select [Lock Channels],
then press the knob.

5 Enter the parental code.

1. Turn the volume knob to select a number, then press the knob.
2. Repeat step 1 until the parental code is completed.

6 Turn the volume knob to select a channel you
want to lock, then press the knob. ” ” appears.

7 Press <

.

Ñ Changing the parental code
1 Press < > to display the function menu. 2 Turn the volume knob to select [Parental
Contr.], then press the knob.
3 Enter the initial parental code (“1111”) 4 Turn the volume knob to select [Change Code],
then press the knob.
5 Enter the old parental code.

1. Turn the volume knob to select a number, then press the knob.
2. Repeat step 1 until the parental code is completed.
   6 Enter a new four-digit code. 7 Repeat step 6 above to confirm the new code.

English | 9

ESixrtiuersnXaMl ®Components

External Components

Reset to the default settings
1 Press and hold < > to display the settings. 2 Press / to select [ ] (General
Settings).
3 Turn the volume knob to select [Factory Reset],
then press the knob.
4 Turn the volume knob to select [SiriusXM], then
press the knob.
5 Turn the volume knob to select [Yes], then press
the knob.

Using external audio players 2
1

AUX OR SIRIUSXM

1 3.5 mm stereo mini plug to RCA plug (Sold separately)
2 Portable audio player (Sold separately)

Ñ Starting playback

1 Connect an external component to the AUX
input terminal.

2 Press <

to display the HOME screen.

3 Turn the volume knob to select [AUX], then
press the knob.

4 Turn on the connected component and start
playing the source.

NOTE
· To select the AUX source, it is necessary to set “AUX Input” to “AUX” in [General Settings]. (P.3).

Camera
A reverse trigger is provided to activate the camera when putting the vessel in reverse or you may select the camera from the source menu.
Ñ Displaying the picture from the camera The camera screen is displayed when you shift the gear to the reverse (R) position.

Ñ To display the picture from the camera manually

1 Press <

to display the HOME screen.

2 Turn the volume knob to select [Camera], then
press the knob.

10

BBluleutoeottho®osmtahrt®phsomne artphone

Ñ About the Bluetooth smartphone and Bluetooth audio player
This unit conforms to the following Bluetooth specifications:
Version
Bluetooth 5.0
Profile Audio player: A2DP (Advanced Audio Distribution Profile) AVRCP (V1.5) (Audio/Video Remote Control Profile)
Sound codec
SBC AAC

Register your smartphone to the unit
You can use your Bluetooth smartphone when paired to this unit. · You can pair the device and the unit using SSP
(Secure Simple Pairing) which only requires confirmation. · One device can be connected at a time. · When you register a new Bluetooth device, disconnect the Bluetooth device currently connected and then register the new device.
1 Turn on the Bluetooth function on your
smartphone.
2 Search the unit (“KD-MR305BTS”) from your
smartphone. If a PIN code is required, enter the PIN code (“0000”).
Ñ Disconnecting the device · Turn off the Bluetooth function from your smartphone. · Turn off the ignition switch.

Playing Bluetooth Audio Device

1 Press <

to display the HOME screen.

2 Turn the volume knob to select [Bluetooth

Audio], then press the knob.

12 3

Source screen

List screen

To

Do this

Play/pause

Press the volume knob.

Select a file

Press / repeatedly.

Fast-backward/ Press and hold /.

Fast-forward

NOTE
· Operations and display indications may differ according to their availability on the connected device.
Ñ Source screen
1 Playback status/Playing time/File number Play time bar : For confirmation of current playing position
2 : Repeat playback mode indicator : Random playback mode indicator
3 Displays the information of the current file.

Ñ Selecting a content in a list

1 Press <

to display the List screen.

2 Turn the volume knob to select an item, then

press the knob.

· To return to the previous layer, press <

.

Function settings

1 Press < > to display the function menu.

2 Turn the volume knob to select the item to set

(see the table below), then press the knob to

make a selection.

3 Press <

.

Browsing See Selecting a content in a list (P.11).

Repeat

All: Repeats all files. ( )

One: Repeats the current file. ( )

Off: Repeat off.

Random Off: Normal playback.

All: Randomly plays all files. ( )

English | 11

SSeetutpup
Settings 1 Press and hold < > to display the settings. 2 Press / to select the category.

General Settings (P.3)
Bluetooth Settings Discoverable Enable (Default)/Disable: Set
whether to pair or not. Device Name The Bluetooth device name of this
unit is displayed.

3 Turn the volume knob to select an item (see the
following table), then press the knob.

4 Repeat step 3 until the desired item is selected/
activated or follow the instructions stated on the selected item.

5 Press <

.

Audio Settings

Fader Balance Graphic Equalizer
Loudness X’over

F12 — R12 (F0/R0): Adjusts the front and rear speaker output balance.

L12 — R12 (L0/R0): Adjusts the left and right speaker output balance.

Selects a preset equalizer suitable to the music genre.

Flat / Hard Rock / Classical / Pop / Dance

/ DRVN / Hip Hop / User Select [User] to use the settings made

1. Press the volume knob to select the

frequency.

2. Turn the volume knob to adjust the

level.

3. Press <

.

Sets the amounts of boost of low and

high tones.

“ON”, “OFF” (Default)

You can set the crossover frequency of speakers. 1) Press / to select the

speaker.

2. Press the volume knob to select the item.
3. Turn the volume knob to adjust the

value.

4. Press <

.

12

RReemmoteocotnetroclontrol
This unit can be operated using the remote control. The wired remote control RM-RK62M (optional accessory) can be used.
Functions of the remote control buttons
4

8

6

3

2

7

1

5

1 SRC

Switches to the source to be played. (excluding Camera)

3 3 2 2

2/3

Selects the track or file to be

played.

During tuner source, switches to

broadcast stations received by the unit. During SiriusXM source, search for

a channel.

4/5 R

During tuner/SiriusXM source,

S

selects preset station.

6/7 VOL + ­ Adjusts the volume.

8 MUTE Tuner/AUX

Mutes/restores the sound.

USB/iPhone/SiriusXM Plays or pauses.

English | 13

IInnstsaltlaatilolnation

Before installation
Before installation of this unit, please note the following precautions.

WARNINGS · If you connect the ignition wire (red) to the negative

ground point, you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. · Do not cut out the fuse from the ignition wire (red). The power supply must be connected to the wires via the fuse.
NOTE
· Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and wiring work to professionals.
· Make sure to ground the unit to a negative 12V DC power supply.
· Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.
· If your vessel ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be drained.
· If the console has a lid, make sure to install the unit so that the front panel will not hit the lid when closing and opening.
· If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating.
· Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.
· Secure the wires with cable clamps and wrap vinyl tape around the wires that comes into contact with metal parts to protect the wires and to prevent short circuit.
· Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the ¤ wires or ground them to any metal part in the vessel.
· When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the ¢ connector of the left speaker to a front output terminal, do not connect the ¤ connector to a rear output terminal.

· After the unit is installed, check whether the signal lamps, wipers, etc. on the vessel are working properly.
· Reception may drop if there are metal objects near the Bluetooth antenna.

Bluetooth antenna unit

Ñ Supplied accessories for installation

1

2

x1

x1

3

4

x1 (M3.5 × 25 mm) x4

5

6

(M4) x8

(M4 × 37 mm) x2

7

8

x1

x1

Ñ Installation procedure

1. To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery.
2. Make the proper input and output wire connections for each unit.
3. Connect the wire on the wiring harness. 4) Connect the wiring harness wires in the following
   order; ground, battery, ignition. 5) Connect the wiring harness connector to the unit. 6) Install the unit in your vessel. 7) Reconnect the ¤ terminal of the battery.

14

Installation
Installing the unit
Ñ Mounting (Using Mounting Plate) To mount the unit, you will need to find a flat surface with adequate clearance behind it that provides enough clearance for the unit and all it’s necessary wiring. 1) Once you have determined a mounting location,
you will need to cut a circular hole 77 mm (3inch) in diameter. 2) After the hole is cut slide the unit and wiring through the hole. 3) Slide the mounting plate (accessory 2) over the backside of the unit and secure with the supplied screws (accessory 4). 4) Press on the trim plate (accessory 1) to the front side of the unit. 5) Plug in all wiring harnesses and cables. Refer to the wiring diagram for wire harness connection types.
2
Panel (Max. 8 mm)

53 5 1
6 M4 × 37 mm
Panel (Max. 15 mm) Ñ Removing the trim plate 1) Use the extraction key (accessory 8) to lever out the four tabs (two on the left part, two on the right part).
8

1 2) Pull the trim plate forward.

4 M3.5 × 25 mm
Ñ Mounting (Using U Bracket)
To mount the unit, you will need to find a flat surface with adequate clearance behind it that provides enough clearance for the unit and all it’s necessary wiring. 1) Attach the screw with nut (accessory 6) to the
back of the unit. 2) Once you have determined a mounting location,
you will need to cut a circular hole 77 mm (3inch) in diameter. 3) After the hole is cut slide the unit and wiring through the hole. 4) Take the bracket (accessory 3) and slide over the two studs on the back of the unit. Tighten down with supplied nuts (accessory 5). 5) Press on the trim plate (accessory

1. to the front side of the unit. 6) Plug in all wiring harnesses and cables. Refer to the wiring diagram for wire harness connection types.

English | 15

Installation

Ñ Connecting wires to terminals

Black

VIDEO IN

Purple/White
REVERSE
Reverse camera trigger input

Light Blue/Yellow
REMOTE CONT
Remote control wire

Camera input (Yellow)
Connect to vessel’s reverse lamp harness when using the optional rear view camera.
To marine remote control unit (optional accessory)

Black

USB INPUT

USB terminal
USB maximum power supply current : DC 5 V = 1.5A

Black
ANTENNA INPUT
FM/AM/Weather Band antenna input

FM/AM/Weather Band antenna

Gray

FRONT LINE OUT

Front output (Left; White, Right; Red)

Black

REAR LINE OUT

Rear output (Left; White, Right; Red)

Purple

SUB-W LINE OUT

Subwoofer output (Left; White, Right; Red)

Fuse (20A)

Red Black

AUX Input/SiriusXM Audio Input (Left; White, Right; Red) (AUX source/SiriusXM source switchable) (P.3)

AUX OR SIRIUSXM

*1 SIRIUSXM OUTPUT

*1 Connect when using SiriusXM source.

SiriusXM Audio Output (Left; White, Right; Red)

Accessory 7

Black

SIRIUSXM INPUT

Blue/White (Power control wire)

White

SiriusXM Connect Tuner connector For more information on how to install the SiriusXM Connect tuner, consult the installation guide included with the tuner.
When using the optional power amplifier, connect to its power control terminal. (Max. 200mA, 12V)

To front left speaker
White/Black Gray
To front right speaker

Orange/White (Dimmer control wire)
To light control switch

Gray/Black Green
To rear left speaker

Red (Ignition wire)

Ignition key switch

Green/Black Purple

Fuse box

To rear right speaker
Purple/Black Speaker impedance: 2-8 16

Black (Ground wire) ¤ (To a negative ground point of the vessel)

Battery

AAbbouot tuhits Utnhitis Unit
Maintenance
Ñ Cleaning the Unit If the front panel of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the front panel is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. ! CAUTION · Applaying spray cleaner directly to the unit may
affect its mechanical parts. Wiping the front panel with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase screened print.
More information
Ñ Usable USB device This unit can play MP3/ WMA/ FLAC/AAC files stored in a USB mass storage class device.
· File system: FAT16,FAT32,exFAT · This unit can recognize a total of 999 files and 255
folders (a maximum of 999 files per folder). · The maximum number of characters:
­ Folder names : 24 characters ­ File names : 24 characters ­ Tag : 30 (Title) /30 (Artist/ Album) characters NOTE · When the USB device is connected to this unit, it can be charged through the USB cable. · Install the USB device in the place where it will not affect safe driving. · You cannot connect a USB device via a USB hub and Multi Card Reader. · Take backups of the audio files used with this unit. The files may be erased depending on the operating conditions of the USB device. We shall have no compensation for any damage arising from any erased data. · No USB device comes with this unit. You need to purchase a commercially available USB device. · Cap the USB terminal whenever not using.

Ñ Playable Audio files

Audio format
MP3 (.mp3)
WMA (.wma) FLAC (.flac) AAC-LC (.m4a)

Bit rate/ (Bit count) 32 ­ 384kbps, VBR 32 ­ 320kbps (16 – 24 bit )
16 ­ 320kbps

Sampling frequency 16 ­ 48 kHz
32 ­ 48 kHz 8 ­ 48 kHz 16 ­ 48 kHz

· This unit can show ID3 Tag Version 1.0/1.1/2.2/2.3/2.4 (for MP3).
· The maximum number of characters: ­ Tag : 30 (Title) /30 (Artist/ Album) characters

NOTE
· WMA and AAC of which is covered with DRM cannot be played.
· Although the audio files are complied with the standards listed above, the play may be impossible depending on the types or conditions of media or device.

Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center. · For operations with the external components, refer
also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components).

Ñ General
No sound comes out of the speakers. · Adjust the volume to the optimum level. · Check the cords and connections.
The remote controller does not work. · Check the wiring of the remote controller.
Ñ USB
While playing a track, sound is sometimes interrupted. · The tracks are not properly copied into the USB
device. Copy the tracks again, and try again.

English | 17

About this Uunit
Ñ iPhone
No sound comes out of the speakers. · Disconnect the iPhone, then connect it again. · Select another source, then reselect “iPhone”.
The iPhone does not turn on or does not work. · Check the connecting cable and its connection. · Update the firmware version of iPhone. · Charge the battery of iPhone. · Reset the iPhone.
Sound is distorted. · Deactivate the equalizer either on this unit or the
iPhone.
A lot of noise is generated. · Turn off (uncheck) “VoiceOver” on the iPhone. For
details, visit https://www.apple.com.
Ñ Tuner
Automatic presetting does not work. · Store stations manually. (P.7)
Static noise while listening to the tuner. · Connect the antenna firmly.
Ñ Bluetooth
The sound is interrupted or skipped while using a Bluetooth audio player. · Reduce the distance between the unit and the
Bluetooth audio player. · Turn off, then turn on the unit. (When the sound is
not yet restored) connect the player again.
The connected audio player cannot be controlled. · Check whether the connected audio player supports
AVRCP (Audio/Video Remote Control Profile).
The Bluetooth device does not detect the unit. · Make sure that the “Discoverable” in Bluetooth
settings is set to “Enable”.
The unit does not pair with the Bluetooth device. · Turn off, then turn on the Bluetooth device. · Disconnect the Bluetooth device currently
connected and then register the new device. (P.11)

Ñ SiriusXM
“No Signal” appears. · Make sure the SiriusXM Satellite Tuner antenna is
mounted outside the car. Move the car to an area with a clear view of the sky.
“Check Antenna” appears. · Check the SiriusXM Satellite Tuner antenna
connection, and make sure the antenna is firmly attached to the tuner. · Check whether the SiriusXM Satellite Tuner antenna cable is bent or broken. If it is damaged, replace the whole antenna unit.
“Check Tuner” appears. · Make sure the SiriusXM Connect Vehicle Tuner is
connected to the unit.
“Channel Not Available” appears. · The selected channel is no longer available. Select
another channel or continue listening to the previous channel.
“Channel Not Subscribed” appears. The currently selected channel is not subscribed to. · In the U.S.A., visit www.siriusxm.com or call
1-866-635-2349 if you have questions about your subscription package or would like to subscribe to this channel. · In Canada, visit www.siriusxm.ca or call 1-877-4389677.
“Subscription Updated” appears. · Your subscription has been updated. Press the
appropriate button to continue.
“Channel Locked” appears. · The selected channel has been locked by the
parental controls. Enter the unlock code when you are asked.

18

About this Unit
Specifications
Ñ Dust/Water proof : IP66 for Faceplate : IPX4 for Body (Equivalent to IEC standard publication 60529)
Ñ Monitor section
Picture Size : 2.7 inch Color TFT
Back Lighting : LED
Ñ USB interface section
USB Standard : USB 2.0 (Full Speed)
Compatible Devices : Mass storage class
File System : FAT16,FAT32,exFAT
Capacity : 32GB maximum capacity, 255 Folders max, 999 Files per Folder max
Maximum Power Supply Current : DC 5V 1.5A
Frequency Response : 20 ­ 20,000 Hz
Audio Decoder :MP3/ WMA/ AAC/ FLAC
Ñ Bluetooth section
Technology : Bluetooth 5.0
Frequency : 2.4 GHz ­ 2.48 GHz
Maximum Communication range : Line of sight approx. 10m (32.8 ft)
Pairing : SSP(Secure Simple Pairing)
Profile · A2DP (Advanced Audio Distribution Profile) · AVRCP (V1.5) (Audio/Video Remote Control Profile)

Ñ FM tuner section
Frequency Range (step) North America: 87.9 MHz ­ 107.9 MHz (200 kHz) South America, Europe, Russia, Asia, Middle East, Australia: 87.5 MHz ­ 108 MHz (50 kHz) Japan: 76.0 MHz ­ 99.0 MHz (100 kHz)
Ñ AM tuner section
Frequency Range (step) North America, South America : 530 kHz ­ 1700 kHz (10 kHz) Europe, Russia, Asia: 531 kHz ­ 1611 kHz (9 kHz) Japan: 522 kHz ­ 1629 kHz (9 kHz) Middle East: 531 kHz ­ 1602 kHz (9 kHz) Australia: 531 kHz ­ 1701 kHz (9 kHz)
Ñ Weather Band tuner section
Frequency Range (step) USA/Canada: 162.400 MHz ­ 162.550 MHz (25 kHz)
Ñ Equalizer
Band : 13 Band
Frequency : 62.5/100/160/250/400/630/1k/1.6k/2.5k/4k/6.3k/ 10k/16kHz
Gain : -9 — +9 (-9 dB — +9 dB)
Ñ Audio section
Maximum Power : 34W × 4 (@ 4 , Peak), 50W × 4 (@ 2 , Peak)
Full Bandwidth Power (1% THD) : 19W × 4 (@ 4 , RMS), 28 W × 4 (@ 2 , RMS)
Preout Level/ Load : 2000 mV/ 10 k (USB)
Preout Impedance : 500
Speaker Impedance : 2 ­ 8

English | 19

About this uUnniitt
Ñ General
Operating Voltage : 12 V DC battery
Installation Dimensions Panel (W × H) : 115 × 106 mm 4-9/16 × 4-3/16 inch Body (W × H × D) : Ø77 × Ø77 × 74 mm Ø3-1/16 × Ø3-1/16 × 2-15/16 inch
Weight : 0.9 kg (2.0 lbs)

Copyrights
· The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
· Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
· Apple, iPhone and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries.
· Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
· Sirius, XM and all related marks and logos are trademarks of Sirius XM Tuner Inc. All rights reserved.

NOTE · Although the effective pixels for the liquid crystal
panel is given as 99.99% or more, 0.01% of pixels may not light or may light incorrectly. · Specifications subject to change without notice.
20

About this Unit

For USA Ñ FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE
· This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
· This equipment may cause harmful interference to tuner communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to tuner or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced tuner /TV technician for help.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
For Canada Ñ ISED CAUTION
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
! CAUTION
This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC tuner frequency (RF) Exposure Guidelines and RSS-102 of the ISED tuner frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.

Supplier’s Declaration of Conformity

Trade Name: JVC

Products:

DIGITAL MEDIA RECEIVER

Model Name: KD-MR305BTS

Responsible Party: JVCKENWOOD USA CORPORATION 4001 Worsham Avenue, Long Beach, CA 90808, U.S.A. PHONE: 1-800-252-5722

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

For Argentina
Ñ Información acerca de la eliminació de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos)

Los productos con el simbolo de un contenedor con ruedas tachado no podran ser desechados como residuos domesticos. Los equipos electricos y electronicos al final de la vid util, deberan ser reciclados en instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos residuales correspondientes. Pongase en contacto con su administracion local para obtener informacion sobre el punto de recogida mas cercano. Un tratamiento correcto del reciclaje y la eliminacion de residuos ayuda a conservar los recursos y evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.
For Mexico Ñ Para cumplimiento de la IFT:
La operacion de este equipo esta sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacion no deseada.

English | 21

References

• SiriusXM: Music, Sports, Talk & Podcasts, Live & On Demand
• Activate Now | SiriusXM
• Apple

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>