FK technics 4739986-08 Enclosed Power Supply 12V Instruction Manual
- June 1, 2024
- FK technics
Table of Contents
FK technics 4739986-08 Enclosed Power Supply 12V
Specifications
- CODE: 4739986-08, 4739987-08, 4739988-08, 4739989-08
- INPUT: 220-240 V AC
- OUTPUT: 12 V DC
- OUTPUT POWER: 15W (1.25A), 36W (3A), 60W (5A), 100W (8.33A)
- DIMENSIONS: Varied by model – 62.5 x 51 x 28 mm, 110 x 78 x 36 mm, 130 x 98 x 40 mm
Product Usage Instructions
Construction and Functionality
The product is a power supply with various output power options. It includes a trimmer for fine-tuning the output voltage.
Setting the Output Voltage
The power supplies come with a factory-set output voltage that can be fine- tuned using the trimmer. This feature is useful for adjusting voltage drops in long output wires.
Declaration of Conformity
The product complies with all basic valid European standards and can provide documentation upon request.
Disposal
Non-functional products should be disposed of following applicable environmental protection regulations.
FAQ
- Q: Can the output voltage be adjusted?
- A : Yes, the output voltage can be fine-tuned using the trimmer provided.
- Q: What should I do with a non-functional product?
- A: Dispose of non-functional products in accordance with environmental protection regulations.
Enclosed power supply 12V
Thank you for the trust you have shown by purchasing the FK product technics. This manual will familiarize you with the mentioned product, his functions and proper operation.
IMPORTANT
- Before using the product, read this manual and the safety warning carefully, to prevent possible damage or injury.
- Keep these operating instructions so that you can read them again at any time!
- This user manual is part of the product and contains important instructions to put the product into operation and to operate it.
- If you pass the product on to other people, be sure to hand it over to them and this user manual.
- The content of this manual is bound by copyright laws and without the written consent of the company FK Technics, spol. s r.o., its content may not be reproduced.
NOTICE
- Use the device only for the purposes for which it is intended, taking into account its technical characteristics and specifications. Its overload or higher voltage can destroy the device.
- Installation of the device may only be carried out by a qualified person according to the valid decree.
- The company FK technics, spol. s.r.o. is not responsible for any damages incurred from improper handling of the product.
- Any modifications or other interventions in the design of the source that may be prohibited are prohibited cause the non-functioning of resources and possibly cause further damage.
- Therefore, any intervention in the design of the sources voids the warranty.
DECLARATION OF CONFORMITY
The product complies with all basic valid European standards which can be presented upon request.
DISPOSAL
A non-functional product must be disposed of in accordance with applicable environmental protection regulations!
TECHNICAL PARAMETERS
| CODE | INPUT | OUTPUT | DIMENSIONS |
|---|---|---|---|
| V AC | V DC | W | A |
| 4739986-08 | 220-240 V | 12 V | 15 W |
| 4739987-08 | 220-240 V | 12 V | 36 W |
| 4739988-08 | 220-240 V | 12 V | 60 W |
| 4739989-08 | 220-240 V | 12 V | 100 W |
PRODUCER:
- FK technics, spol. sr.o.
- Hartigova 1883/62 130 00 Praha 3
- [email protected]
- www.fkt.cz