FK technics 4731306-08 12V Mains adapters Instruction Manual

FK technics 4731306-08 12V Mains adapters

Product Information

Specifications:

• Input Voltage (AC): 100-240 V
• Output Voltage (DC): 12V or 24V
• Output Power: 24W, 36W, 60W, 96W
• Output Current: 1A, 2A, 3A, 4A, 5A, 8A
• IP Coverage: IP20
• Dimensions: Vary based on model

Product Usage Instructions

Power Supply Connection:
Ensure the input voltage matches the product specifications (100-240V AC). Connect the DC connector (5.5 x 2.1mm) to the device requiring power.

Power Output Selection:
Determine the appropriate output voltage (12V or 24V) and current based on the requirements of your device.

Maintenance:
The power supplies are designed to be maintenance-free. If needed, remove dust using a dry cloth or compressed air to prevent overheating.

Disposal:
Dispose of non-functional products in accordance with local environmental protection regulations to ensure proper recycling.

Frequently Asked Questions (FAQ):

• Q: Can I use this power supply for outdoor applications?
  A: The product has an IP20 rating, which means it is suitable for indoor use only and should be protected from moisture.

• Q: How do I know which output setting to use for my device?
  A: Refer to your device’s manual for the required voltage and current specifications. Match these specifications with the output options provided by the power supply.

• Q: What should I do if the product malfunctions?
  A: Contact the producer FK technics for support or information on warranty and repair services.

Thank you for the trust you have shown by purchasing the FK product technics. This manual will familiarize you with the mentioned product, his functions and proper operation.

IMPORTANT

• Before using the product, read this manual and the safety warning carefully, to prevent possible damage or injury.
• Keep these operating instructions so that you can read them again at any time!
• This user manual is part of the product and contains important instructions to put the product into operation and to operate it.
• If you pass the product on to other people, be sure to hand it over to them and this user manual.
• The content of this manual is bound by copyright laws and without the written consent of the company FK technics, spol. s r.o., its content may not be reproduced.

NOTICE

• Use the device only for the purposes for which it is intended, taking into account its technical characteristics specifications. Its overload or higher voltage can destroy the device.
• Installation of the device may only be carried out by a qualified person according to the valid decree.
• The company FK technics, spol. s.r.o. is not responsible for any damages incurred improper handling of the product.
• Any modifications or other interventions in the design of the source that may be prohibited are prohibited cause non-functioning of resources and possibly cause further damage.
• Therefore, any intervention in the design of the sources voids the warranty.

USE

The sources are designed to supply consumers with low DC voltage. Appropriate are for applications with LEDs, typically LED strips. For a longer service life, choose a source with approx 20% reserve.

CONSTRUCTION

• Before connecting, always make sure that the values of the mains voltage are the same as the values on the label of the power adapter.
• Check that the adapter is not damaged before plugging it into the mains socket whether the insulation of the output cable is broken.
• Power supplies must be placed or built into place in such a way as to guarantee free air flow around the source and self-cooling.
• If good cooling of the source is not guaranteed, it may overheat and thereby limit the function, unacceptably high working temperatures mean a noticeable shortening of the lifetime of the sources or their possible damage.

MAINTENANCE
The power supplies are designed as maintenance-free and do not require any special maintenance. The only possible maintenance is possible removal of dust, e.g. with a dry cloth or compressed air.

DECLARATION OF CONFORMITY
The product complies with all basic valid European standards which can be presented upon request.

DISPOSAL
A non-functional product must be disposed of in accordance with applicable environmental protection regulations!

TECHNICAL PARAMETERS

(mm)
4731306-08| 100-240 V| 12 V| 24 W| 2 A| IP20| 88 x 39 x 28
4739976-08| 100-240 V| 24 V| 24 W| 1 A| IP20| 88 x 39 x 28
4730999-08| 100-240 V| 12 V| 36 W| 3 A| IP20| 109 x 45 x 31
4739977-08| 100-240 V| 24 V| 36 W| 1,5 A| IP20| 109 x 45 x 31
4730969-08| 100-240 V| 12 V| 60 W| 5 A| IP20| 116 x 54 x 35
4739978-08| 100-240 V| 24 V| 60 W| 2,5 A| IP20| 116 x 54 x 35
4731179-08| 100-240 V| 12 V| 96 W| 8 A| IP20| 155 x 60 x 38
4739979-08| 100-240 V| 24 V| 96 W| 4 A| IP20| 155 x 60 x 38

PRODUCER:
FK technics, spol. sr.o.
Hartigova 1883/62
130 00 Praha 3
fkt@fkt.cz
www.fkt.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>