FK technics 4731261-08 Power Adapter Instruction Manual

: June 1, 2024
: FK technics

Table of Contents

4731261-08 Power Adapter
Read User Manual Online (PDF format)
Download This Manual (PDF format)

4731261-08 Power Adapter

Manual

Power adapter

4731261-08

|

12V; 12W (1A)

|

4730525-08

|

24V; 24W (1A)

---|---|---|---|---

4731260-08

|

12V; 24W (2A)

|

4739033-08

|

12V; 36W (3A)

|

Thank you for the trust you have shown by purchasing the FK product technics. This manual will familiarize you with the mentioned product, his functions and proper operation.

IMPORTANT

Before using the product, read this manual and the safety warning carefully, to prevent possible damage or injury.
Keep these operating instructions so that you can read them again at any time!
This user manual is part of the product and contains important instructions to put the product into operation and to operate it.
If you pass the product on to other people, be sure to hand it over to them and this user manual.
The content of this manual is bound by copyright laws and without the written consent of the company FK technics, spol. s r.o., its content may not be reproduced.

NOTICE

Use the device only for the purposes for which it is intended, taking into account its technical characteristics specifications. Its overload or higher voltage can destroy the device.
Installation of the device may only be carried out by a qualified person according to the valid decree.
The company FK technics, spol. s.r.o. is not responsible for any damages incurred improper handling of the product.
Any modifications or other interventions in the design of the source that may be prohibited are prohibited cause non-functioning of resources and possibly cause further damage.
Therefore, any intervention in the design of the sources voids the warranty.

USE

The sources are designed to supply consumers with low DC voltage. Appropriate are for applications with LEDs, typically LED strips. For a longer service life, choose a source with approx 20% reserve.

CONSTRUCTION

Before connecting, always make sure that the values of the mains voltage are the same as the values on the label of the power adapter.
Check that the adapter is not damaged before plugging it into the mains socket whether the insulation of the output cable is broken.
Power supplies must be placed or built into place in such a way as to guarantee free air flow around the source and self-cooling.
If good cooling of the source is not guaranteed, it may overheat and thereby limit the function, unacceptably high working temperatures mean a noticeable shortening of the lifetime of the sources or their possible damage.

MAINTENANCE

The power supplies are designed as maintenance-free and do not require any special maintenance. The only possible maintenance is possible removal of dust, e.g. with a dry cloth or compressed air.

DC connector 5,5 x 2,1mm
12V (24V) DC