BAINTECH BT18 Jump Stater Power Bank User Manual

BAINTECH BT18 Jump Starter Power Bank

Thank you for choosing the EPower! Always follow basic safety precautions when using electrical, appliances. Read all instructions carefully, Please keep this instruction manual for easy reference.

PRODUCT LAYOUT

Instructions for buttons and display screen:

1. Long press the switch button for 2S to display the product battery
2. preset tire pressure value
3. static air pressure value
4. BAR, PSI, КРА
5. car, SUV, basketball, bicycle pattern
6. The power is displayed according to the battery grid on the right, and it enters the mode to be pummeled at the same time.
7. Shortly press the light switch button to turn on the LED light, and the white light will stay on; after pressing the switch button again, the LED will enter the red light flashing mode; press the red light SOS again, and then press to turn off the light.
8. When the load is removed 30 seconds later, the product automatically enters the dormant state.
9. In standby and normal working state, press the “SET” button to enter their pump editing mode, the SUV icon will be displayed, and the tire pressure value (unit BAR) will be preset at the same time. Short press the “+” and “” buttons to adjust the air pressure value. Long press the “SET” button to switch, and switch the unit between KPA,BAR , and PSI under the corresponding object; short press the “SET” button to switch the object, display the pattern of the car and the preset air pressure value (fixed as BAR), and then short press the “+” “—” key can adjust the air pressure value, long press the “SET” key to switch the unit between KPA, BAR, PSI under the corresponding object; short press the “SET” key again to display the bicycle pattern and the preset air pressure value (fixed at PSI), and then short press the “+”‘”” button to adjust the air pressure value, long press the “SET” button to switch the unit between the KPA, BAR, PSI under the corresponding object; then short press the “SET” button to display the basketball icon and the preset set the air pressure value (fixed in PSI), and then short press the “+”” keys to adjust the air pressure value; long press the “SET” key to switch the unit between KPA, BAR, PSI under the corresponding object; Press the “SET” button again to display the free function and the preset air pressure value(KPA). Short press the “+” and”” keys to adjust the air pressure value. Long press the “SET key to switch the unit between KPA, BAR, and PSI in free mode.
10. When the air pump mode is selected (SUV, car, bicycle, basketball), icon 4 will display the preset tire pressure value.
    • Note: The preset value is for reference only.
    • Please adjust it according to the actual situation.
    • Which are:
    • SUV: 2.5 BAR
    • Car: 2.4 BAR
    • Bicycle: 45PSI
    • Basketball: 0.7 BAR Note that the unit on the left corresponds to the switch, and only one unit can be displayed.
11. When charging, it displays “battery icon 1, the icon advances in flashing intervals from bottom to top according to the power”
12. When the power of a product is less than 10%, the corresponding power indicator flashes.

Epower Charging Instruction:

1. Plug the home adaptor into the universal socket.
2. Connect the USB-C connector to the EPOWER host.

Jump start 12V vehicle Instruction:

1. Connect the blue plug fully seated into the host, and make sure the Cable Indicator is off.
2. Connect the Red Clamp to the positive (+) battery terminal, and the Black Clamp to the negative (-) battery terminal.
3. Operate following the instruction of the Cable Indicator:
   • GREEN LIGHT Telling the connection is correct and the circuit is working, you can turn on the engine to jump-start directly.
   • REVERSE RED LIGHT on  Telling the connection is wrong, to correct the clamps as step 2 mentioned above, wait until the GREEN LIGHT is on to turn on the engine.
   • GREEN LIGHT blinking: Saying the vehicle battery is low, press the “BOOST” button, wait until GREEN LIGHT becomes solid, then turn on the engine within 30s.
   • No Lights on  Saying the vehicle’s battery may be damaged, after confirming the connection of the clamps is correct, press the “BOOST” button, wait until GREEN LIGHT is on, and then turn on the engine within the 30s.
4. Start the vehicle.
5. When the vehicle is started, remove the jumper cable from the vehicle battery. Leave the vehicle’s engine running.

Charging Cell Phone or Tablet Instruction:

1. Plug the switch cable into the USB 5V 2A output port.
2. Select the appropriate connector and connect it to your mobile phone or tablet.
3. Press the switch button to charge.

For power supply to 12V vehicle products or 12V electronics

1. Plug the optional switch cable into the 15V 10A output port.
2. Connect the optional switch cable and 12V vehicle product or 12V electronics.
3. Press the switch button to power the supply.

LED flashlight

Press the switch for 3 seconds to start the LED flashlight.
There are 4 modes of LED light that appear in order (normal. strobe. SOS. off) if you press slightly.

PARTS LIST

TECHNICAL SPECIFICATIONS

FAQ

How to turn off this appliance?

This appliance will power off automatically when no load of charging is complete. Long press the 1S power button to enter shutdown.

How long does it need to fully charge the jump starter?

Approx. 4 hours through the USB 9V/2A input.

How many times can this appliance charge for my cell phone?

Approx. 4 times for iPhone 11.

How many times can this appliance jump start the vehicle if it is in full battery?

Approx. 30 times.

How about the lifetime of this appliance?

About 3-5 years.

How long the storage of battery will remain?

6-12 months, however, we suggest to recharge it every 3 months.

TROUBLESHOOTING

TOXIC AND HARMFUL SUBSTANCES

Warning

1. Read the instruction manual carefully before using this unit.
2. Jump for 12V vehicles only, it would be hazardous for others to jump. It is forbidden to use for other machines such as aircraft, ships,s and so on.
3. Caution while using this unit.
4. DO NOT use this unit if any cable clamp or cord is damaged.
5. DO NOT use in place of a vehicle battery.
6. DO NOT use it as a battery charger.
7. Never keep the unit on the car battery after cranking the car successfully.
8. Use the jumper cable provided with this unit only.
9. Make sure the BLUE plug of the jumper Cable is plugged fully into the jumping socket, Otherwise, the blue plug will be melted.
10. Make sure to check all the battery connections are CLEAN before Jump-Starting! Make sure the battery clamps are well connected! If the battery terminals on the vehicle are dirty or corroded, the power of the unit will be lessened.
11. Do NOT Jump Start more than 3 times in a row. It could damage the unit by overheating. Give two minutes between attempts. The jumping cable can become overheated and detach as a safety measure.
12. Remove the product from the vehicle battery within 30 seconds of Jump Starting. If not, it could lead to damage.
13. Do NOT connect the two clamps.
14. Only jump start when 3 to 4 indicator lights are illuminated.
15. Do NOT use by young or infirm persons without supervision.
16. Do NOT use it as a toy.
17. Do NOT allow the product to become wet.
18. Do NOT immerse the product in water.
19. Do NOT operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
20. Do NOT modify or disassemble Epower. Only a repair technician may repair this unit.
21. Do NOT expose the product to extreme heat or fire.
22. Make sure someone should be within range of your voice or close enough to come to your aid when working with batteries.
23. Remove personal metal items like rings, bracelets, necklaces, etc. When using the products.
24. Do NOT drop the unit. If the unit receives a sharp blow or is otherwise damaged in any way have it checked by a qualified battery technician.
25. Do NOT store in locations where the temperature may exceed 70°C
26. Charge only at ambient temperature between 0°C and 60°C.
27. Charge only using the charger provided with this unit.
28. Do NOT use the unit to jump-start a vehicle while charging the internal battery.
29. If this unit is leaking liquid dispose of it at the proper recycle facility immediately.
30. Under extreme conditions, battery leakage can occur. If a liquid is noticed coming from a product do not handle it with bare hands. In case of skin contact wash with soap and water immediately.
    • If liquid comes in contact with eyes rinse eyes with cold running water for at least 10 minutes and get medical attention immediately.
31. The product contains a lithium-based battery, and at the end of the product’s life disposed of product according to local regulations.

WARRANTY INFORMATION

1. We offer a limited warranty for this product against any defects in material and workmanship for 6 months from the date of purchase by the end user/consumer. The conditions of the warranty are as follows:
2. The warranty is only valid upon presentation of the original receipt (trom dealer/retailer) by the original purchaser with the product to be repaired or replaced.
3. The warranty is void if the serial number, date of purchase, and label have been removed.
4. The warranty does not cover damage or product failure resulting from normal wear and tear, physical abuse, improper installation, misuse, modification, or repairs by unauthorized third parties.
5. We do not assume responsibility for any loss or damage incurred during shipment or as a result of a force majeure.
6. We are not liable for any incidental or consequential damages arising from the use or misuse of this product.
7. All warranty claims are limited to repair or replacement of the defective product and at the sole discretion of.
8. If we repair or replace the product, the product will be covered for the remaining time of the original warranty period.
   • Repair or replacement may involve the use of reconditioned units that are equivalent in function. Replaced part or products becomes the property of.
9. Consumable components such as batteries are not covered by the warranty.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>