ideal lux Audio PT3 H130 Floor Lamp Instruction Manual

: June 1, 2024
: ideal lux

Table of Contents

ideal lux Audio PT3 H130 Floor Lamp
Product Information
Product Usage Instructions
FAQ
FEATURES
INSTALLATION INSTRUCTIONS
SAFETY INSTRUCTIONS
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ideal lux Audio PT3 H130 Floor Lamp

Product Information

Specifications

Brand: Ideal Lux
Model: Audio PT3 H130
Socket Type: GU10
Max Wattage: 3 x 10W LED
Voltage: 220-240V, 50/60Hz
EAN: 8021696293684
Color: Nero (Black)

Product Usage Instructions

Installation

Ensure installation is carried out by a qualified electrician.
Follow the assembly instructions provided in numerical order.

Energy Efficiency

This product is equipped with a replaceable LED light source, suitable for end-user replacement. Always refer to the energy efficiency class provided.

Safety Instructions

Make sure to disconnect the power supply before installation or maintenance.
Avoid looking directly at the light source.
Use appropriate fixing accessories and follow local regulations for installation.
If the external power cable is damaged, it should be replaced by the manufacturer, retailer, or a qualified electrician.
Do not disassemble the product with non-replaceable LED light sources.
Replace the fuse if the lamp fails to turn on.
Ensure electrical safety with Class I protection and proper grounding.

FAQ

Q: Can I replace the LED light source myself?
A: Yes, this product is designed for end-user replacement of the LED light source. Always refer to the user manual for specific instructions.
Q: What should I do if the lamp does not turn on?
A: Check and replace the fuse if necessary. If the issue persists, consult a professional electrician for further assistance.

Audio PT3 H130

Floor lamp
GU10 max 3 x 10W LED/ 220~240V 50/60Hz – 8021696293684 NERO

FEATURES

ideal-lux-Audio-PT3-H130-Floor-Lamp-FIG-3

INSTALLATION INSTRUCTIONS

FOLLOW THE ASSEMBLY INSTRUCTIONS BY READING THE NUMERICAL PROGRESSION
THE LIGHTING FITTING SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN

ideal-lux-Audio-PT3-H130-Floor-Lamp-FIG-4

THE SAFETY AND RELIABILITY ARE GUARANTEED ONLY WHEN INSTALLATION INSTRUCTIONS ARE PROPERLY FOLLOWED. PLEASE KEEP THIS INSTRUCTION SHEET FOR FUTURE REFERENCE.

This product is provided with a light source with efficient energy class of:
Energy Efficiency Class

LEGENDA ICONE

Replaceable light source by an end-user.
Replaceable LED light source by an end-user.
Replaceable light source by authorized personnel only.
Non-replaceable light source. Upon the end of the life of the light source, the whole product will be replaced.
Replaceable control gear by an end-user.
Replaceable light source by authorized personnel only.
Upon the end of the life of the control gear, the whole product will be replaced.

SAFETY INSTRUCTIONS

This fitting is produced and tested by the strictest European safety standards (EN 60.598-1).
This fitting cannot be disposed of as household waste. For disposal information ask the local authorities about how to collect it.
As indicated by specific regulations, the lighting fitting should be installed by a qualified electrician.
If the external wire is damaged it has to be replaced exclusively by the manufacturer, distributor or by a qualified electrician.
Always isolate power before commencing installation, maintenance or repair.
The luminaire contains certain parts which can be very hot.
Each material requires specific mounting accessories. Use screws and wall plugs suitable for the material to which they are fastened. Those included may be unsuitable.
Always tighten the screws firmly to avoid contact problems.
This fitting should only be installed indoors.
Luminaires not suitable for recessed on normally flammable surfaces.
Luminaire not suitable for direct mounting on normal flammable surfaces.
This fitting is only suitable for fixing the ceiling.
This fitting is only suitable for fixing the wall.
The weight of the lamp has to be supported by the chain. Adjust the length of the electric wire so that it is longer than the chain.
Only use lamps that do not exceed the maximum specified wattage.
Always observe the minimum distance between the lamp and the surface being lit, as shown in the icon. The lamp can cause a fire if the minimum distance is not observed.
Auto-protected bulb. Only use bulbs marked with this symbol. Halogen bulbs get very hot. Wait until they cool down before replacing them.
Cracked or broken safety glass has to be replaced immediately. Use only manufacturer-approved parts complying with regulations.
Light source with not-substitutable light emitting diode (LED). Do not disassemble the product since the diodes can damage the eyes. Do not immerse in water. Wipe with a damp cloth. Do not use solvents or strong detergents.
This fitting is equipped with a fuse. If the lamp is out of order, replace the internal fuse.
Class I Electrical safety is guaranteed by the main insulation and an additional protective conductor (earthing) connected to the metal frame of the lamp. Earthing is obligatory.
Class IL electrical safety is guaranteed by the main insulation and double or reinforced insulation. Earthing is not necessary.
Class Ill Electrical safety is guaranteed by a very low power supply (less than 50 Volts). Earthing excluded.
Not protected.
Protected against solid objects greater than 50 mm.
Protected against solid objects greater than 12 mm.
Protected against solid objects greater than 2,5 mm.
Protected against solid objects greater than 1mm.
Dust protected.
Totally protected against dust infiltration.
Not protected.
Protected against vertically falling water drops.
Protected against water drops falling with a maximum angle of 15° to the vertical axis.
Protected against rain.
Protected against splashing water.
Protected against water jets.
Protected against strong water jets.
Protected against temporary immersion.
Protected against prolonged immersion.
Luminaire not suitable for covering with thermally insulating material.
Caution, risk of electric shock.
Do not stare at the operating light source.