ideal lux SP H18 Decor LED Pendant Light Instruction Manual
- June 1, 2024
- ideal lux
Table of Contents
ideal lux SP H18 Decor LED Pendant Light
Product Information
- Specifications:
- Model: Decor SP H18
- Power: LED 10W
- Voltage: 220-240V, 50/60Hz
- EAN: 8021696292083
- Energy Efficiency Class: D
- Light Source: 300 mA, 30 V DC
- Description:
- The Decor SP H18 is a modern LED lighting fixture suitable for indoor use.
- It provides efficient lighting with a power consumption of 10W and operates at a voltage range of 220-240V.
Product Usage Instructions
- Installation:
- Ensure installation is done by a qualified electrician following the provided numerical progression.
- Follow the assembly instructions carefully.
- Make sure the lighting fitting is installed securely and in the correct position.
- Maintenance:
- For maintenance or replacement of the light source:
- If the light source is replaceable by the end-user, follow the provided instructions.
- If the light source can only be replaced by authorized personnel, contact the manufacturer or a qualified technician.
- Safety Instructions:
- Always disconnect from the power supply before any installation or maintenance work.
- Avoid looking directly at the light source to prevent eye strain.
- Ensure compliance with local safety regulations during installation.
FAQs
- Q: Can the LED light source be replaced by the user?
- A: Yes, the LED light source is replaceable by the end-user.
- Q: What should be done if the external power cord is damaged?
- A: The external power cord should be replaced only by the manufacturer, retailer, or a qualified electrician.
DIMENSION
FEATURE
ASSEMBLY INSTRUCTIONS
- FOLLOW THE ASSEMBLY INSTRUCTIONS BY READING THE NUMERICAL PROGRESSION.
- THE LIGHTING FITTING SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN.
ICONE
THE SAFETY AND RELIABILITY ARE GUARANTEED ONLY WHEN INSTALLATION INSTRUCTIONS ARE PROPERLY FOLLOWED. PLEASE KEEP THIS INSTRUCTION SHEET FOR FUTURE REFERENCE.
- This product is provided with a light source with efficient energy class of:
- EAN
- 8021696292083
- Light Source Model
- DECOR MODULE
- Energy Efficiency Class
- D
- Light Source (mA)
- 300 mA
- Light Source (V)
- 30 V DC
- Replaceable light source by an end-user.
- Replaceable LED light source by an end-user.
- Replaceable light source by authorized personnel only.
- Upon the end of the life of the light source, the whole product will be replaced.
- Replaceable control gear by an end-user.
- Replaceable light source by authorized personnel only.
- Upon the end of the life of the control gear, the whole product will be replaced.
SAFETY INSTRUCTIONS
- This fitting is produced and tested by the strictest European safety standards (EN 60.598-1).
- This fitting cannot be disposed of as household waste. For disposal information ask the local authorities about how to collect it.
- As indicated by specific regulations, the lighting fitting should be installed by a qualified electrician.
- If the external wire is damaged it has to be replaced exclusively by the manufacturer, distributor or by a qualified electrician.
- Always isolate power before commencing installation, maintenance or repair.
- The luminaire contains certain parts which can be very hot.
- Each material requires specific mounting accessories. Use screws and wall plugs suitable for the material to which they are fastened. Those included may be unsuitable.
- Always tighten the screws firmly to avoid contact problems.
- This fitting should only be installed indoors.
- Luminaires are not suitable for recessed on normally flammable surfaces.
- Luminaire is not suitable for direct mounting on normal flammable surfaces.
- This fitting is only suitable for fixing the ceiling.
- This fitting is only suitable for fixing the wall.
- The weight of the lamp has to be supported by the chain. Adjust the length of the electric wire so that it is longer than the chain.
- Only use lamps that do not exceed the maximum specified wattage.
- Always observe the minimum distance between the lamp and the surface being lit, as shown in the icon. The lamp can cause a fire if the minimum distance is not observed.
- Auto-protected bulb. Only use bulbs marked with this symbol. Halogen bulbs get very hot. Wait until they cool down before replacing.
- Cracked or broken safety glass has to be replaced immediately. Use only manufacturer-approved parts complying with regulations.
- Light source with not-substitutable light emitting diode (LED). Do not disassemble the product since the diodes can damage the eyes. Do not immerse in water. Wipe with a damp cloth. Do not use solvents or strong detergents.
- This fitting is equipped with a fuse. If the lamp is out of order, replace the internal fuse.
- Class I Electrical safety is guaranteed by the main insulation and an additional protective conductor (earthing) connected to the metal frame of the lamp. Earthing is obligatory.
- Class IL electrical safety is guaranteed by the main insulation and double or reinforced insulation. Earthing is not necessary.
- Class III Electrical safety is guaranteed by a very low power supply (less than 50 Volts). Earthing excluded.
- Not protected.
- Protected against solid objects greater than 50 mm.
- Protected against solid objects greater than 12 mm.
- Protected against solid objects greater than 2,5 mm.
- Protected against solid objects greater than 1mm.
- Dust protected.
- Protected against dust infiltration.
- Not protected.
- Protected against vertically falling water drops.
- Protected against water drops falling with a maximum angle of 15° to the vertical axis.
- Protected against rain.
- Protected against splashing water.
- Protected against water jets.
- Protected against strong water jets.
- Protected against temporary immersion.
- Protected against prolonged immersion.
- Luminaire is not suitable for covering with thermally insulating material.
- Caution, risk of electric shock.
- Do not stare at the operating light source.
CONTACT
- IDEAL LUX s.r.l.
- Via Taglio Destro 32
- 30035 Mirano (VE) Italy
- www.ideal-lux.com.
- IDEAL LUX Warehouse
- Via delle Industrie, 8/D
- 30036 Santa Maria di Sala (Venezia)
- 8.00 – 12.00 / 13.30 – 17.00
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>