Apple A8PRO-AIR Earphone Charging Case User Guide
- June 1, 2024
- Apple
Table of Contents
Apple A8PRO-AIR Earphone Charging Case
Specifications
- Model : BT
- Compliance: Part 15 of FCC Rules
- RF Exposure : Meets general RF exposure requirements
- Usage: Portable exposure condition without restriction
Product Usage Instructions
Connecting Headphones via Bluetooth
- Open the case containing the headphones.
- Place the case close to the device you want to pair with.
- Turn on the Bluetooth function on both the headphones and the device.
- The devices should automatically pair once they are nearby.
Important Notes
It is essential to follow the pairing instructions to ensure a successful connection between the headphones and your device. Avoid any interference during the pairing process for optimal performance.
FAQ
- Q: What should I do if the headphones do not pair automatically?
- A : If the automatic pairing process fails, try manually initiating the pairing mode on both the headphones and the device. Refer to the user manual for specific instructions on how to enter pairing mode.
- Q : Can I use the headphones in areas with high RF exposure?
- A : Yes, the headphones have been evaluated to meet general RF exposure requirements, allowing you to use them in portable exposure conditions without restrictions.
Earphone (2nd generation)
with a large screen Charging case (USB-C)
Usage Instructions
Swipe up or down to adjust the volume.
Press and hold
Switch between Active Noise Cancellation and Transparency mode.
Audio controls in the Control Center. Swipe down from the top-right corner to open Control Center. Touch and hold the volume to see audio options.
Connect
Connect to BT and turn.
Connect your headphones. Open the case and set it close to the device. Turn on Bluetooth devices to automatically pair
Connect to other devices.
With Earphones in an open case, press the button on the back until the light
blinks. Then choose them in Bluetooth settings.
Changing ear tips.
Pull firmly to remove the tip. To attach the tip, align it, then push until it
clicks. For more tip sizes, see the inside box.
Choose the most comfortable fit for vour ears
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning : changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment The devices have been evaluated to meet general RF exposure requirements, and the device can be used in portable exposure conditions without restriction
CONTACT
- User Guide. To learn more, go to
- support.com/guide.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>