Holmes 32510397 40 Inch Digital Tower Fan With SmartConnect App Instruction Manual

Holmes 32510397 40 Inch Digital Tower Fan With SmartConnect App

Product Specifications

• Control Options: Mobile App, Voice Assistant
• Speed Levels: Adjustable
• Timer Settings: 1H, 2H, 4H, 8H
• Oscillation: On/Off
• Compatible Systems: iOS 13, AndroidTM 10

FAQ

• Q: How do I replace the fuse in the plug?
• A: Follow these steps:
  • Unplug the fan.
  • Open the fuse cover on the plug.
  • Remove the blown fuse carefully using a small screwdriver.
  • Insert a new 2.5 Amp, 125 Volt fuse into the compartment.
  • Secure the fuse in place and close the fuse cover.
• Q: Can I clean the fan blade?
• A: Do not attempt to remove the fan blade. Clean the fan grill, housing, and base with a soft cloth dampened with mild soap solution.
• Q: What should I do if the attachment plug is damaged?
• A: Do not replace the attachment plug yourself. Discard the product if the attachment plug is damaged to avoid risks of fire or electrical hazards.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken including the following:

1. Read all instructions before using this fan.
2. Use fan only for purposes described in the instruction manual. This fan is not for continuous operation or equivalent.
3. To protect against electrical shock do not immerse the fan, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.
4. Not intended for use by children.
5. Unplug from the outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate in the presence of explosive and/or flammable fumes.
8. To avoid fire hazards, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.
9. Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard fan or return to an authorized service facility for examination and/or repair.
10. Do not run the cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from the traffic area so that it will not be tripped over.
11. WARNING: To reduce the risk of fire, electric shock, or injury to persons, do not use replacement parts or attachments not recommended by the manufacturer (e.g. parts made at home using a 3D printer).
12. Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high-traffic areas.
13. Do not use outdoors.
14. To disconnect, grip the plug and pull from the wall outlet. Never yank on the cord.
15. Always use on a dry, level surface.
16. Do not operate the fan until fully assembled with all parts properly in place.
17. This fan is intended for household use ONLY and not for commercial or industrial applications.
18. WARNING: To reduce the risk of electrical shock and injury to persons, do not use in the window.
19. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
20. This fan employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet.
    Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded or contact customer service.

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep them away from children. Do NOT dispose of batteries in household trash or incinerate them.
• Even used batteries may cause severe injury or death.
• Call a local poison control centre for treatment information.
• Always use the same size and grade battery as CR2025 for this product.
• Always use a voltage 3V battery for this product.
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above 104ºF or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
• Ensure the batteries are installed correctly according to polarity (+ and -).
• Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
• Remove and immediately recycle or dispose of batteries from equipment not used for an extended time according to local regulations.
• Always completely secure the battery compartment.
• If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

WARNING

• INGESTION HAZARD: This product contains a button cell or coin battery.

• DEATH or serious injury can occur if ingested.

• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.

• KEEP new and used batteries OUT OF REACH of CHILDREN

• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

• A. Control Panel

• B. Indicator Lights

• C. Fan Grill

• D. Base Post Halves

• E. Base Halves

• F. Carrying Handle/Remote Control Storage

• G. Plug Storage Clip

• H. Remote Control

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.

PARTS AND ASSEMBLY

ASSEMBLY AND OPERATING INSTRUCTIONS

ASSEMBLY
Estimated assembly time: 5-10 minutes Tool-free. 3 thumb screws included.
NOTE: MAKE SURE YOU REMOVE ALL CONTENTS FROM THE PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR PARTS THAT COULD BE REQUIRED TO OPERATE YOUR FAN.

1. Assemble the Base Post around the power cord by snapping Post Halves (D) together. Refer to Figure 2, step 1.
2. Line up the top of the Base Post with the base of the fan housing.
3. Insert the Base Post into the opening of the fan housing aligning the arrows. See Figure 2, step 2.
4. Rotate the Base Post counterclockwise to lock.
5. Assemble Base Halves (E) around the power cord. To secure the Base Halves together, slide the posts of one base half into the slots of the second base half. Refer to Figure 2, step 3.
6. Line up the screw holes of the base halves with the holes located on the bottom of the Base Post. Secure with the three thumb screws included with the fan. Refer to Figure 2, step 3.
7. Turn the fan right side up and place on a dry and level surface.

OPERATING INSTRUCTIONS (Figure 4)

1. Plug the cord into a standard 120-volt AC outlet.

2. To turn the fan ON, press the POWER button (E) located on the control panel or remote control

3. Press the SPEED button (C) to cycle through the 5-speed settings in sequence.
   The corresponding indicator light will illuminate to confirm the selection: speed 1-5.

4. To turn OSCILLATION ON and OFF, press the OSCILLATION button (F).

5. To set automatic shutoff, press the TIMER button (D).
   When set, the fan will run and automatically shut off after the set duration (1H, 2H, 4H or 8H) has expired.

6. To activate SLEEP mode, press the MODE button (A).
   This function slows the BREEZE setting by one level every ten minutes until it reaches LOW.

This function slows the BREEZE setting by one level every ten minutes until it reaches LOW.

• To activate BREEZE mode, press the MODE button again.
• The fan will cycle through alternating speeds with brief pauses to simulate a natural outdoor breeze:
• BREEZE I: Cycles through low and medium speeds.
• BREEZE II: Cycles through medium and low speeds.
• BREEZE III: Cycles through medium, high and low speeds.
• To activate POWER BREEZE mode, press the MODE button again. This function will provide maximum air velocity.

NOTE: To silence setting confirmation beeps, press the MUTE button (B) on the remote control. To re-activate the setting confirmation beeps, press the MUTE button again.

REMOTE CONTROL AND MOBILE APP INSTRUCTIONS

REMOTE CONTROL (SEE FIGURE 5)
NOTE: REMOVE THE PROTECTIVE STICKER FROM THE REMOTE CONTROL BATTERY BEFORE OPERATION.
This remote includes one lithium CR2025/3V button cell battery. Remove the battery before discarding the remote.
Battery Replacement
Button cell batteries should be disposed of properly, including keeping it away from children. Even used button cell batteries may cause injury.

1. Locate the battery compartment on the bottom back of the remote control handset. Push the tab and pull out the battery tray.
2. Remove the old battery.
3. Place the new battery into the battery tray.
4. Slide the battery tray into the battery compartment of the remote control handset.

NOTES

1. Remove the battery from the remote control when it is not being used for an extended period.
2. Remove the used battery promptly.
3. Do not discard used batteries into household trash containers. Contact your local government for disposal or recycling practices in your area.

SETTING UP THE HOLMES MOBILE APP
Note: A 2.4 GHz Wi-Fi network is required.

1. Download the Holmes® App from Google Play, the Apple App Store or the QR code located on the back of this Instruction Manual.
2. Create an account by following the steps in the App.
3. Enter the verification code you received to confirm your account and create a password.
4. Select “Add Device” or the plus (+) sign in the top right corner.

Auto Pairing (Recommended Method)

1. Ensure Bluetooth® and Wi-Fi are activated on your mobile device.

2. Ensure Nearby Services and Location permissions are set to allow for the Holmes App. (This is required to detect nearby Wi-Fi and Bluetooth signals and pair your fan).

3. Press and hold the OSC/WIFI PAIRING button on the fan’s control panel for 5 seconds, until an audible beep is heard and the red indicator light flashes which indicates the device is in pairing mode.
   Note: if the pairing is not completed within 2-3 minutes, the device will exit pairing mode and step 2 will need to be repeated.

4. Select “Auto Scan” at the top of the screen. You should see an icon for the fan that has been found.

5. Click “Next.”

6. Input your Wi-Fi name and password.

7. Wait for the connection to be established.

8. Press “Done” (top right-hand corner).
   Your fan is now available to control from your smartphone.

Manual Pairing
If Auto Pairing is unsuccessful:

1. Ensure Bluetooth® and Wi-Fi are activated on your mobile device.
2. Ensure Nearby Services and Location permissions are set to allow for the Holmes App. (This is required to detect nearby Wi-Fi and Bluetooth signals and pair your fan).
3. Ensure the fan has been unplugged for 10 seconds or more, then replug and power on the fan.
4. Press and hold the OSC/WIFI PAIRING button on the fan’s control panel for 5 seconds, until the red indicator light is flashing. The device is now in pairing mode. Note: if the pairing is not completed within 2-3 minutes, the device will exit pairing mode and step 3 will need to be repeated.
5. On your mobile device, click “add device”, then select “add manually” at the top of the screen. Click the fan icon.
6. When the fan is successfully found by Bluetooth®, click the green “+” on the fan icon that appears.
7. Enter your Wi-Fi name and password.
8. Wait for the connection to be established (green checkmark), then press Next.
9. Press has done (top right-hand corner). The fan is now available to control from your smartphone.

MOBILE APP INSTRUCTIONS

CONTROLLING THE FAN WITH THE HOLMES® APP
The Holmes® App has the same functionality as the remote control, as well as additional features.

1. Power
2. Fan Speed
3. Oscillation
4. Mode
5. Timer
6. Schedule

Note: The control panel display on the tower fan will change to match the setting selected in the app.

Note: The control panel display on the tower fan will change to match the setting selected in the app.

1. POWER: Press to turn ON/OFF

2. SPEED: Slide your finger across the speed level scroll bar to increase or decrease fan speed.

3. OSCILLATION: Press to turn
   ON/OFF.

4. MODE: Press icons to select the preferred mode.

   • Normal – Steady Fan Speed
   • Sleep – Low Fan Speed
   • Breeze – Alternating Fan Speed
   • Power Breeze – Maximum Air Velocity

5. TIMER:
   To set your fan for auto-shutoff, select a run-time of 1H, 2H, 4H or 8H.

   • The default setting is 1 hour.
   • Choose the number of hours from the list.

SCHEDULE
To Set Schedule

1. Press Schedule.

2. Select Add on the next page.

3. Select the time of day the fan should turn on or off.
   Be sure to choose the hour and minutes.

4. Click on “Repeat” and select which day of the week the schedule will be active.

5. Click “Power” and select whether the fan should turn on or off.

6. Select your desired fan speed, mode and oscillation.

7. Click “save” to save the selection and return to the previous menu.

8. Your saved schedule will appear on the Schedule screen.

9. To turn OFF the schedule, press the slider button to the right. It will change from green to grey to indicate the schedule is off. To turn ON the schedule, press the slider button again. It will change from grey to green to indicate the schedule is ON.

VOICE ASSISTANT INSTRUCTIONS

SETTING UP VOICE ASSISTANT
To pair the Tower Fan with Amazon Alexa and Google Voice-Enabled Devices:

1. Open the Holmes® App.
2. Select the “Me” icon in the bottom bar.
3. Choose the icon of the Voice Assistant you wish to connect.
4. Follow the instructions that appear.

Voice Assistant Functionality

• Use the following command sequence for Amazon Alexa enabled devices: “Alexa, “Primary Command” + “Device
• Name” + “Secondary Command”(if applicable). For example, “Alexa, Activate Holmes® Fan” or “Alexa, Turn Up
• Holmes® Fan speed by 3”.
• Use the following command sequence for Google Assistant-enabled devices: “Hey Google, “Primary Command” +
• “Device Name” + “Secondary Command”(if applicable) For example, “Hey Google, Activate Holmes® Fan” or “Hey
• Google, Turn Up Holmes® Fan speed by 3”.
• Note: The default “Device Name” is “Holmes® Fan”. To personalize the device name, see below.

PERSONALIZING THE DEVICE NAME
To personalize the fan name for easier voice commands:

1. Open the Holmes® App.
2. Select the product name you wish to change.
3. Select the pencil icon in the top right corner.
4. On the following screen, click on or tap the name of the product.
5. Tap the current name of the fan.
6. Rename the product and press save.

Note: The name will automatically update for both Amazon Alexa and Google Voice Enabled Devices.

• Google, Google Play and Google Home are trademarks of Google LLC.
• Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
• App Store is a service mark of Apple Inc.
• MINIMUM SYSTEM REQUIREMENTS iOS 13 OR ANDROID™ 10

CLEANING AND MAINTENANCE

CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for this fan.

REPLACEABLE FUSE
If the (2.5 Amp, 125 Volt) replaceable fuse blows, please contact customer service for information on how to order a new fuse. Follow the below instructions to replace the fuse on the plug.

User Servicing Instructions

1. Unplug this fan. Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.

2. Open the fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover down towards the prongs.
   NOTE: Ensure that the fuse cover is completely open before attempting to remove the fuse.

3. Remove the fuse carefully by using a small screwdriver to pry the fuse out of the compartment by the metal ends of the fuse. (see Figure 5)

4. Place the plug on a solid, flat surface. Insert the new 2.5 Amp, 125 Volt fuse into the fuse compartment and use a small screwdriver to secure the metal ends of the fuse into the compartment.
   CAUTION: Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.

5. The slide fuse cover closed completely. If the fuse cover is difficult to close, make sure the fuse is secured in place completely by pressing down on the metal ends of the fuse.

6. Risk of fire. Do not replace the attachment plug. Contains a safety device (fuse) that should not be removed. Discard the product if the attachment plug is damaged.

FAN CLEANING

1. Always unplug the fan before cleaning.
2. Do not allow water to drip on or enter into fan housing.
3. Be sure to use a soft cloth moistened with a mild soap solution.
4. Do not use gasoline, thinner or benzene as a cleaner.

Unplug the fan, then clean the fan grill, housing, and base with a soft, damp cloth. Do not attempt to remove the fan blade. Use CAUTION around the housing area. Do not allow the motor or other electrical components to be exposed to water.

FAN STORAGE

• Store the fan in a clean, dry location between seasons or when not in use for an extended period.
• Keep the fan protected from dirt and dust during storage.

NOTE: This fan can also be used during the cold winter season to circulate warm air throughout your home.

For inquiries regarding recycling and proper disposal of this product, please contact your local waste management facility.

FCC STATEMENT

Potential for Radio/Television interference
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the product on or off, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The following importer is the responsible party:
Company Name: SEG Products US Corp.
Address: 8 The Green, Suite #6962, Dover, DE 19901
Telephone: 1-959-202-4223

WARRANTY

3 YEAR LIMITED WARRANTY
This device has a 3 Year limited warranty for the original purchaser from the date of purchase against workmanship and defects in material. If under normal use, your product fails to operate, a replacement or refund will be provided to you with proof of purchase. Star Elite Inc. may deny claims of damage caused by misuse or modifications of this product.

Warranty Service

• If you have any problems, please do not contact the store. Contact our customer service at:
• www.getholmesfans.com
• info@getholmesfans.com
• 1-866-769-3166 (8:30 am – 5:00 pm EST) Monday – Friday
• Our customer service will be happy to assist you.

© 2024 Sunbeam Products, Inc. All rights reserved.
HOLMES® is a registered trademark of Sunbeam Products, Inc. used under license. Distributed by Star Elite Inc., Montreal, Canada H3B 3X9 SEH026-010824

References

• . Spend less. Smile more.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>