Holmes 32510126 Blizzard Air Circulator Fan Instruction Manual
- May 15, 2024
- Holmes
Table of Contents
Holmes 32510126 Blizzard Air Circulator Fan
Product Information
Specifications
- Cool Grey Item: 12518
- Misty Blue Item: 12820
- Model: 32510126
- Type: Air Circulator Fan
- Power Supply: Standard 120 volt AC outlet
- Speed Settings: 3 (Low, Medium, High)
Product Usage Instructions
Cleaning and Maintenance
Fan Cleaning
Using a soft, moist cloth with or without a mild soap solution, carefully clean the fan base and head. Avoid exposing the motor or electrical components to water.
Fan Storage
This fan can be used to circulate warm air in the winter. Store in a dry place when not in use.
Important Safety Instructions
When using the fan, follow these safety precautions:
- Read all instructions before use.
- Use the fan only for its intended purposes.
- Avoid immersing the unit in water.
- Ensure the cord is not in contact with hot surfaces or exposed to high traffic areas.
- Do not use the fan outdoors.
- Always disconnect by gripping the plug and pulling from the wall outlet.
- Operate the fan on a dry, level surface.
- Do not use the fan near windows.
Operation
Assembly
The fan comes fully assembled and ready for use.
Operating Instructions
- Place the fan base on a dry, level surface.
- Ensure the Speed Control Knob is in the OFF position (0).
- Plug the cord into a standard 120 volt AC outlet.
- To adjust speed, turn the Speed Control Knob to the desired setting (1-2-3).
Tilt Adjustment
Gently move the fan head up or down manually to adjust the angle.
Wall Mounting Instructions
The fan can be wall-mounted. Mounting screws are not included. Follow the provided mounting location guide for proper installation.
Maintenance
Regularly clean the fan head and base as instructed above. Refer to the user manual for any troubleshooting steps.
FAQ
- Q: Can the fan be used outdoors?
- A: No, this fan is designed for indoor use only and should not be used outdoors.
- Q: How do I adjust the fan speed?
- A: Use the Speed Control Knob to adjust the speed settings from 1 to 3.
- Q: What should I do if the fuse blows?
- A: If the replaceable fuse blows, visit our website for information on ordering a new fuse and follow the provided instructions to replace it safely.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be taken including the following:
- Read all instructions before using this appliance.
- Use fan only for purposes described in the instruction manual.
- To protect against electrical shock do not immerse the unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.
- Close supervision is necessary when any appliance is used near children.
- Not intended for use by children.
- Unplug from the outlet when not in use, when moving the fan from one location to another, and before cleaning.
- Avoid contact with moving parts.
- Do not operate in the presence of explosive and/or flammable fumes.
- To avoid fire hazards, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.
- Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard fan or contact customer service.
- Do not run a cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange the cord away from the traffic area and where it will not be tripped over.
- The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
- Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high-traffic areas.
- Do not use outdoors.
- To disconnect, grip the plug and pull from the wall outlet. Never yank on the cord.
- Always use on a dry, level surface.
- Do not operate fan until fully assembled with all parts properly in place.
- This product is intended for household use ONLY and not for commercial or industrial applications.
- WARNING: To reduce the risk of electrical shock and injury to persons, do not use in the window.
- WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- WARNING: To reduce the risk of fire, electric shock or injury to persons, do not use replacement parts that have not been recommended by the manufacturer (e.g. parts made at home using a 3D Printer).
- This fan employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded or contact customer service.
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY
OPERATION
ASSEMBLY
This fan comes completely assembled and is ready for use.
OPERATING INSTRUCTIONS
- Set the fan base on a dry, level surface.
- Make sure the Speed Control Knob (E) is in the OFF (0) position.
- Plug cord into any standard 120-volt AC outlet.
- To adjust the speed, turn the Speed Control Knob (E) to the desired setting, 1-2-3.
TILT ADJUSTMENT
Gently move the fan head up or down manually to the desired angle.
WALL MOUNTING INSTRUCTIONS
This fan can be wall mounted and is designed to operate from various positions while wall mounted, mounting screws not included.
- After selecting a suitable location on the wall, use the corresponding mounting location guide below to ensure proper placement.
- Use the holes below as a guide and mark the correct place where the screws will be inserted. Consult with a hardware or Home Center Professional for the best screws for your type of wall.
- Secure the screws almost all the way into the wall using a screwdriver.
- Line up the holes on the back of the unit with the screws to hang the fan. Make sure the screws are secured into the wall before carefully placing the fan on them.
Product Overview
- A. Front Grill
- B. Rear Grill
- C. Fan Blade
- D. Base
- E. Speed Control Knob
- F. Motor Housing
CLEANING / MAINTENANCE
FAN CLEANING
- Always unplug the fan before cleaning.
- Do not allow water to drip on or into the fan housing.
- Use only a soft cloth moistened with a mild soap solution.
- Do not use harsh chemicals such as gasoline, thinner or benzene as a cleaner.
- Do not attempt to remove the fan blade.
FAN HEAD AND BASE CLEANING
Using a soft, moist cloth, with or without a mild soap solution, carefully
clean the fan base and head. Use
CAUTION around the housing area.
Do not allow the motor or other electrical components to be exposed to water.
FAN STORAGE
- Store the fan in a clean, dry location between seasons or when not in use for an extended period of time.
- Keep the fan protected from dirt and dust during storage.
NOTE: This fan can also be used during the cold winter season to circulate warm air throughout your home.
For inquiries regarding recycling and proper disposal of this product, please contact your local waste management facility
MAINTENANCE
USER SERVICING INSTRUCTIONS
Follow these instructions to safely and correctly care for this fan.
REPLACEABLE FUSE
If the (2.5 Amp, 125 Volt) replaceable fuse blows, please visit our website at www.getholmesfans.com for information on how to order a new fuse. Follow the below instructions to replace the fuse on the plug.
REPLACING THE FUSE
-
Unplug the fan.
Grasp plug and remove it from the receptacle or other outlet device.
NOTE: Do not unplug by pulling on cord. -
Open fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover towards the prongs.
NOTE: Ensure the fuse cover is completely open before attempting to remove fuse. -
Remove fuse carefully by using a small screwdriver to pry it from the compartment at the metal ends of the fuse. (See Figure 2)
-
Place plug on a solid, flat surface. Insert new 2.5 Amp, 125 Volt fuse into fuse compartment. Use a small screwdriver to secure the metal ends of the fuse into the compartment.
CAUTION: Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse. -
Slide fuse cover closed completely.
NOTE: If fuse cover is difficult to close, make sure the fuse is completely secured in place by pressing on the metal ends of the fuse.
CAUTION: Risk of fire. Do not replace the attachment plug. It contains a safety device (fuse) that should not be removed. Discard the product if the attachment plug is damaged.
WARRANTY INFORMATION
3-YEAR LIMITED WARRANTY
This device has a limited warranty of 3 years from the original date of purchase against workmanship and defects in material. If under normal use, your product fails to operate, please contact our customer service department at [email protected]. A refund or replacement will be provided to you with proof of purchase. Star Elite Inc. may deny claims of damage caused by misuse or modifications of this product.
Warranty Service
Contact our customer service at
- www.getholmesfans.com/en/contact-us
- [email protected] or
- 1-866-769-3166 (8:30 am – 5:00 pm EST) Monday-Friday.
Our team will be happy to assist.
2023 Sunbeam Products, Inc. All rights reserved. HOLMES® and BLIZZARD® are registered trademarks of Sunbeam Products, Inc. used under license. Distributed by Star Elite Inc., Montreal, Canada H3B 3X9 SEH027-101123