AEGIS CZ20053 RCD Tester Installation Guide
- June 11, 2024
- AeGIS
Table of Contents
AEGIS CZ20053 RCD Tester
Product Information
The CZ20053 Aegis RCD Tester is a fully featured digital device designed to meet Australian and New Zealand safety requirements. It is an essential piece of equipment for every workplace that tests all Residual Current Devices (RCDs) for electrical safety to AS/NZS 3760:2010. The RCDs are designed and specified to protect people and equipment from the danger of electrical faults. The CZ20053 is a full feature, high accuracy RCD tester providing electricians with all the features required for RCD testing. It is made to be rugged to withstand everyday operation required within the electrical industry. All components of the RCD are contained in a carry case, and all test leads are supplied so you can start testing as soon as you take it out of the box.
Product Usage Instructions
- Ensure that the operational voltage is within the range of 195VAC-253VAC and the frequency is 50Hz.
- Connect the test leads to the RCD tester.
- Turn on the CZ20053 RCD Tester.
- Select the appropriate current multiplier (x1/2, x1, x5).
- Press the test button to start testing.
- Check the full icon display for results.
- If the RCD has tripped, check the trip time ranges (40 – 3000ms) that vary with current/multiplier.
- If the RCD has not tripped, it is functioning correctly.
An RCD tester for all electrical installations
The amazing CZ20053 RCD Tester
- Protect yourself and your employees by ensuring that your portable electrical appliances and equipment are tested for electrical safety to AS/NZS 3760:2010 with the RCD Tester.
- The CZ20053 Aegis RCD Tester is an essential piece of equipment for every workplace. You can make sure that your business is complying to OH&S standards by testing all of your Residual Current Devices (RCDs) with the CZ20053. RCDs are designed and specified to protect people and equipment from the danger of electrical faults.
- Due to their inherent ‘safety’ nature, RCDs need to be tested on a regular basis to ensure their correct operation, which is where the CZ20053 comes in.
- With this fully-featured digital device you can test all of your Residual Current Devices and protect yourself and your staff by ensuring that the RCDs are functioning correctly. It is designed to meet Australian and New Zealand safety requirements.
RCD tester
Residual Current Devices (RCDs) are designed to protect people and property
from the danger of electrical faults. As such, they need to be tested at
installation and during maintenance. The CZ20053 is a full-feature, high-
accuracy RCD tester providing electricians with all the features required for
RCD testing.
This tester is made to be rugged to withstand the everyday operation required
within the electrical industry.
Manufactured under a Quality System complying to ISO9001 : 2000 (QEC Lic 5948)
- Aegis has designed, manufactured and supplied
- Australian industry with test equipment for more than 80 years and we now services a wide range of international customers in the data, electrical, gas, telecommunications, and water industries.
- Maximising the efficiency and effectiveness of business
Australia
Toll Free 1300 723 447
Unit 9, 173-181 Rooks Road Vermont, Vic 3133
Tel : (61 3) 8872 6666
Email: sales@aegis.net.au
www.aegis.net.au
New Zealand
Toll Free 0508 423 447 Office 103 Level 1, Quad 7 Building, 6 Leonard Isitt
Drive, Auckland 2022
Tel : (64 9) 884 3910
Email: sales@aegis.net.nz
www.aegis.net.nz