escapade warehouse 45K42.01 Ice Lantern Instructions
- September 7, 2024
- escapade warehouse
Table of Contents
escapade warehouse 45K42.01 Ice Lantern
Instructions for Use
- Fill mold to 1/2 inch of the edge.
- Freeze 12 to 24 hours, depending on your freezer setting.
- Allow frozen mold to stand for 30 minutes at room temperature.
- Turn mold over and pour hot tap water in the center cavity.
- Discard water after 5 minutes and remove the mold. Repeat as needed.
- Set a votive, tealight or floating candle in the center.
- Do not use candles in metal cups as they may melt through the ice.
Helpful hints
- Use distilled water for more transparent ice.
- Make Ice Lanterns ahead of time and keep them in the freezer.
- Freezing water expands and becomes uneven. Straighten by putting the Ice Lantern on glass pebbles, river stones, etc., (sold in craft stores).
- Place Ice Lantern in a bowl to collect melting ice or use a kitchen bulb baster to siphon water as needed.
- The large mold holds 5 liquid pints and will last about 5 hours at 70°F/20°C.
- CAUTION : When using a candle in the ice lantern, keep away from flammable materials and out of children’s reach.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>