ZVOLTZ ZT000036 Pro Sport Wireless Earbuds User Guide

June 6, 2024
ZVOLTZ

ZVOLTZ Logo

ZVOLTZ ZT000036 Pro Sport Wireless Earbuds

ZT000036 Pro Sport Wireless Earbuds

In The Box

  1. 2 Wireless Earbuds (Left/Right)
    2 Wireless Earbuds

  2. Charging Case
    Charging Case

  3. Type-C Cable
    Type C Cable

  4. User Manual

  5. Warranty Card

NOTE: The Type-C Charging Port is ONLY for charging the Charging Case. While the USB Type-A Port is ONLY for charging OTHER devices.

Activating The Earbuds

  1. Take out the Earbuds.
    Activating Earbuds 01

  2. Pull the protective adhesive film off of the Earbuds.
    Activating Earbuds 02

  3. Please put Earbuds back into the Charging Case and CLOSE it for at least 1 min. and then begin use.
    Activating Earbuds 03

Pairing The Earbuds

PAIR
  1. Open the Charging Case to automatically power ON the earbuds.
  2. White and Red LED Indicator on the earbuds will flash and a voice prompt will state, “Pairing”.
  3. Go to Settings. Go to Bluetooth. Tap “ZVOLTZ”.
  4. A voice prompt will state, “Connected” signaling the process is complete.

Pairing Earbuds

What if you cannot find “ZVOLTZ” in your Bluetooth page?

Reason 1: Earbuds have paired to another device.
Solution: Disconnect the Earbuds by turning Off the Bluetooth on the mistaken connected devices, then pair the Earbuds to your preferred device.
Reason 2: The Ear buds has reached 0% battery life.
Solution: Place both Earbuds back into the Charging case. Allow the Earbuds to recharge for around 5 mins. If the Charging Case has run out of battery, plug it into a USB power source with the Earbuds still in side. (Type-C Cable provided).
Reason 3: Earbuds are completely OFF.
Solution: You may have accidentally manually turned off the Earbuds, Please press and hold the MFB buttons for 3-4 seconds to turn on the Earbuds.

Pairing Modes

  • STEREO MODE
    Open Charging Case, take out the Earbuds, and they will automatically synch and pair. A voice prompt will say, “Pairing”.
    Stereo Mode

  • SINGLE EAR MODE
    Put one Earbud into Charging Case and CLOSE it. Your preferred Earbud will enter Single Ear Mode when successfully paired to your phone.
    Single Ear Mode

Properly Wearing The Ear Hooks

STEP 1:
Wrap the earloop around the back of your ear.
Wearing Ear Hooks 01 STEP 2:
Gently press the earbud inside of your ear.

Wearing Ear Hooks 02

**NOTE: The pre-installed earcaps are removable. If you find the earcaps are too large, you can remove them at anytime to adjust to your desired comfort.

How To Charge Earbuds And Case

  1. Properly insert the Earbuds into the Charging Case and CLOSE it.
    Charge Earbuds Case 01

  2. Plug in the Type-C Cable. Now, the Earbuds and Charging Case are charging simultaneously.
    Charge Earbuds Case 02

  3. 4-star LED Light on Charging Case will show battery percentage.
    Charge Earbuds Case 03

**IMPORTANT: If there is a GAP between the cable and case, it is NOT charging properly. Push cable FIRMLY into place and you will hear a loud CLICK sound knowing it’s charging properly.

In-Depth Ear Hook Tips

Our Zvoltz Pro Sport Wireless Earbuds come installed with special ear hooks that provide a secure, comfortable, and snug fit for our users.
However, users should NOT overly bend or forcefully apply the ear hooks into your ears. Gently wrap the ear hooks behind both ears for a snug and preferred fit. If there is still fitting trouble, simply remove the pre-installed earcaps. These earcaps may be TOO large and are impairing wearing experience.

Using the Multi-Function Button

SINGLE PRESS

Music-Play/Pause

Play Pause

DOUBLE PRESS (LEFT / RIGHT)

Music-Left for Playback. Right for Skip

Playback Left Right

SINGLE PRESS (LEFT / RIGHT)

Calls-Answer/End Calls or Switch Between Calls

Call Accept Reject

SINGLE PRESS (LEFT / RIGHT)

Calls-Press and Hold For 1 Second Will Reject Call

Call Hold

ACTIVATE VOICE ASSISTANT (SIRI, GOOGLE ASSISTANT)

Tap the MFB 3 Times

Voice Assistant

VOLUME CONTROL

Press the volume control buttons to either Increase or Decrease the volume of the earbuds at any time.

Volume Control 01

Volume Control 02

Factory Reset

  1. Place the Zvoltz Pro Earbuds inside of the charging case with the lid open.
  2. Now, with the earbuds still inside, press and hold the Factory Reset Button for 10 seconds. During this time, the 4 White LED lights on the Charging Case will flash 3 times signaling the reset process. After they stop, this will properly clear all paired information and correctly reset the earbuds.

IMPORTANT: After Factory Reset is performed, the device name will still appear in the Bluetooth list. Tap “ZVOLTZ” and tap “Forget This Device”. then, you can try the pairing process again.

Factory Reset

*NOTE: During this entire process, the lid should remain OPEN.

FAQ

Q: How do I charge separate devices?
A: Use the USB Type-A Port on the Charging Case to charge other devices such as smartphones or tablets.(USB Type-A Cable Sold Separately).
Q: What if I cannot properly pair my earbuds to my device?
A: If your earbuds are paired to another device or you are unable to find “ZVOLTZ” within your Bluetooth List, perform a factory reset.
Q: How often should I charge the earbuds?
A: Standard battery life is 3.5 hours. But using the Charging Case, you can recharge battery life for up to 80 hours. However, try to avoid reaching 0% battery life.
Q: Are the earbuds waterproof?
A: No. The earbuds are NOT waterproof. But, they have a IPX5 rating, meaning, they are water, sweat, and dust resistant. NEVER fully submerge the earbuds in water.

WARNINGS
The Zvoltz Pro Sport Wireless Earbuds are NOT a TOY. Before use, please ensure to read through the entire Warnings Section to avoid any possible damage, mistakes, or accidents that may be caused by mishandling or misusing the product.

  1. The product is NOT a TOY. DO NOT let children use or touch the product.
  2. DO NOT go longer than a month to charge the earbuds. By doing so, it may potentially lessen the expected lifespan of the product.
  3. DO NOT modify, disassemble, remove, or replace the battery or other electronic components.
  4. DO NOT place the product into standard household waste or into a fire. To properly dispose of the product, follow the local environmental and disposing laws and protocols to handle the battery.
  5. DO NOT allow the battery to reach 0% battery life. By doing so, there is a rare occasion that the earbuds pair and connect to your phone. To avoid this entirely, always keep the earbuds at a reasonable and stable battery level.
  6. DO NOT overly bend, tear, rip, break, chew on, or disfigure the ear hooks.
  7. NEVER fully submerge the product into water or any other liquid.
  8. DO NOT throw, toss, drop, break, or misuse the Charging Case.
  9. DO NOT overly or forcefully press down onto the Volume Control Buttons as it may damage the product.
  10. DO NOT misuse, damage, or purposely try to break the battery, charging case, or earbuds.

ZVOLTZ Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals