LIQUID EARS HPK13164 Earphones Plus Active Noise Cancelling Instruction Manual
- June 1, 2024
- Liquid Ears
Table of Contents
LIQUID EARS HPK13164 Earphones Plus Active Noise Cancelling
Product Information
- Specifications:
- Model Numbers: HPK13164, HPW13165, HPX13216
- Features: True Wireless Earphones, Active Noise Cancelling
- Power Button LED Indicator
- Automatic syncing between earphones
- Charging case included
- Auto Power Off feature
Product Usage Instructions
- Pairing the Earphones:
- Place both earphones in the charging case to activate the multifunction button.
- Remove the earphones from the case. They will automatically turn on and sync to each other.
- Look for “LE TWS” on your device’s Bluetooth menu and select it to connect.
- You will hear a voice prompt “Connected” when successfully paired.
- Auto Power Off Feature:
- The earphones will automatically turn off if there is no operation for 3 minutes after removing them from the charging case.
Earphone Controls:
| Action | Left Earphone (L) | Right Earphone (R) |
|---|---|---|
| Single Click | Play / Pause | Play / Pause |
| Press and Hold | Volume – | Volume + |
| Double Click | Answer / End Calls | Answer / End Calls |
| Triple Click | Reject Incoming Calls | Reject Incoming Calls |
| Press and Hold for 3 Seconds | N/A | Voice Assistant |
| Press and Hold for 2 Seconds | N/A | Transparency Mode / ANC Mode On/Off |
FAQs
- Q: How do I know if the earphones are paired?
- A: When successfully paired, you will hear a voice prompt “Connected” and the LED indicators will stop flashing.
- Q: What should I do if the charging case stops working?
- A: The charging case may stop working when the battery is low. Ensure it is adequately charged before use.
Product Overview & Functions
Specifications
- Bluetooth® Version: 5.4
- Driver Size: 13mm
- Charge Case Charging Time: 1.5hr
- Earphone Battery Type: Li-polymer 3.7V/40mAh
- Charge Case Battery Type: 3.7V/300mAh
- Active Noise Cancelling: -25dB
- Sensitivity: 112dB ± 1.5dB
- Frequency Response: 20Hz – 20KHz
- Impedance: 32 Ohm
- Bluetooth Range: 10m
- Standby Time: 60 Hours
- Play Time: 20 Hours
- Operation Temperature: 0° – 45°C
How to use these Earphones:
- Automatic Synchronizing
- When the earphones are removed from the case they will automatically turn ON and sync to each other, You are now ready to pair to your device.
- If they have previously been paired to a device, they will automatically re-connect.
Pairing with Your Devices
- Look for “LE TWS” on your device in the Bluetooth menu and select it to connect. You will hear a voice prompt “Connected”, and the second earphone LED indicator will stop flashing. You are now connected. Pairing Just One Earphone with Your Devices
- Take either one of the earphones out from the charging case, it will automatically turn on. The LED indicator on the earphone stem will flash. Look for “LE TWS” on your device in your Bluetooth menu and select it to connect.
- You will hear a voice prompt “Connected”, and the earphone LED indicator will stop flashing. You are now connected.
- Note: Earphones will automatically turn OFF if there is no operation for 3 minutes after switching on.
Battery Charging (Charging Case)
- Connect the USB-C charging cable to the socket on the charging case.
- Plug the cable into a standard USB 5V power output.
- The red LED indicator will flash while the case is Charging and will then stay on when fully charged.
- ( Note: Before using the charging case for the first time, we recommend you fully charge the battery. A full charge takes around 1.5 hours).
- When fully charged, unplug the charging cable from the power socket.
- Note: The charging case will stop working when the battery is low.
Earphone Charging
- When the earphone’s battery power is low, the LED indicator will flash red slowly and you will hear a voice prompt reminding you to recharge the device.
- Put the earphones into the charging case, ensuring that the earphones are pushed down all the way.
- If the earphones are on, they will automatically turn OFF when inserted into the case for charging.
- ( Note: The earphones come with a built-in rechargeable battery. Before using them for the first time, we recommend you fully charge the battery. A full charge takes around 1.5 hours).
- The white LED indicator on the charging case will be on when charging the earphones and the charging case LED indicator will turn off when charging is complete.
- When the earphones are removed from the case they will automatically turn ON and sync to each other. If they have previously been paired to your device, they will also automatically re-connect.
- Warning: The earphones can only be used with the provided charge case.
Operation
Note: Some features may differ pending paired device software versions and platforms. Before using the earphones for the first time, place both earphones into the supplied charging case once and then remove them. This will activate the multifunction button option.
Auto Power Off:
- Earphones will automatically turn off if there is no operation for 3 minutes after removing from the charging case.
- Read this user manual before using the product.
- Keep the user manual for future reference and include it when passing product to third parties
- Liquid Ears will not in any way be held responsible for injury or damage caused to persons or property arising from misuse of the product.
WARNING
- The USB power cable has been meticulously designed and optimized for use exclusively with the product it accompanies.
- Using the USB power cable with devices other than the one intended could cause electrical hazards such as overheating, short-circuiting, or even damage to your device.
BLUETOOTH
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by The Crest Company is under licence.
- Other trademarks and trade names are those of their respective owners.
WARNING
- Do not dispose of the unit in fire or water.
- Never attempt to disassemble and reassemble.
- Waste electrical products should not be disposed of with household waste, please recycle where facilities exist.
- Check with your local authority for recycling advice.
- Keep your device and all accessories out of the reach of children and animals.
- Small parts may cause choking or serious injury if swallowed.
- Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 45°C).
- Extreme temperatures can cause the deformation of the device and reduce the charging capacity and life of your device.
- Do not allow your device to get wet-liquids can cause serious damage.
- Do not handle your device with wet hands.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>