LIQUID EARS HPB13195 Wireless Headphones User Manual
- June 1, 2024
- Liquid Ears
Table of Contents
LIQUID EARS HPB13195 Wireless Headphones
Specifications
- Driver Size
- Impedance
- Sensitivity
- Battery Capacity
- Play Time
- Standby Time
- Charging Time
- Wireless Range
Product Overview:
- Volume Down | Previous Track | Volume Up | Next Track
- Power On/Off | Play / Pause
- Micro-USB Charging Port
- 3.5mm Audio Jack
- LED Indicator
Function Operation
- Power ON/OFF: Press and hold button
- Pause/Play: Press
- Answer/End Call: Press
- Reject Call: Press and hold
- Redial Call: Press twice
- Next Track: Press and hold + button for 2s
- Previous Track: Press and hold – button for 2s
- Volume Up: Press +
- Volume Down: Press –
Charging:
This wireless headphone is powered by a rechargeable Lithium-ion battery and is recommended to fully charge before initial use. When the headphone requires charging, insert the supplied Micro-USB charging cable into the headphone port and into a suitable USB port for charging. The headphones will automatically turn off. The LED indicator will turn red to show the headphone is charging. When the LED indicator turns off, the headphone is fully charged.
Read this user manual before using the product. Keep the user manual for future reference and include it when passing product to third parties. Liquid Ears will not in any way be held responsible for injury or damage caused to persons or property arising from misuse of the product.
WARNING: The USB power cable has been meticulously designed and optimized for use exclusively with the product it accompanies. Using the USB power cable with devices other than the one intended could cause electrical hazards such as overheating, short-circuiting, or even damage to your device.
FAQ
Q: Is this product water-resistant?
A: No, this product is not water-resistant. Avoid exposing it to water or moisture.
Q: How do I pair these headphones with my device?
A: To pair the headphones, ensure they are charged, then turn
them on. Put your device into Bluetooth pairing mode and select the headphones
from the list of available devices.
HEADPHONES
HPB13195 / HPP13196
Warning!
Not suitable for children under 3 years.
Contains small parts.
Specifications
- Driver Size: 40mm
- Impedance: 32Ohm
- Sensitivity: 82dB ± 3dB
- Battery Capacity: 200mAh
- Play Time: 8 Hours
- Standby Time: 100 Hours
- Charging Time : 3 Hours
- Wireless Range: 10m (without obstacles)
Includes:
- 1 x Wireless Headphone
- 1 x Micro USB Cable
- 1 x Instruction Manual
Product Overview
Function Operation
Pairing
- To enter pairing mode, ensure the headphone is off, then press and hold the power button until the LED indicator flashes red and blue.
- On your device search for the pairing name HPB13195, HPP13196 and once selected the LED light indicator will turn off and a voice prompt “connected” can be heard.
- Once paired, the headphone will automatically connect to the previously paired device when switched on.
Wired Connection
- If you wish to use the headphone in a wired mode, simply connect a 3.5mm Audio Cable (Not Included) into the port in the headphone and insert the other end into the source device.
- To use the wired mode, you are not required to turn the headphones on, simply control the audio via the device.
Charging
This wireless headphone is powered by a rechargeable Lithium-ion battery and is recommended to fully charge before initial use. When the headphone requires charging insert the supplied Micro-USB charging cable into the headphone port and into a suitable USB port for charging, the headphones will automatically turn off. The LED indicator will turn red to show the headphone is charging. When the LED indicator turns off the headphone is fully charged.
Read this user manual before using the product.
Keep the user manual for future reference and include it when passing product
to third parties Liquid Ears will not in any way be held responsible for
injury or damage caused to persons or property arising from misuse of the
product.
WARNING The USB power cable has been meticulously designed and optimized for use exclusively with the product it accompanies. Using the USB power cable with devices other than the one intended could cause electrical hazards such as overheating, short-circuiting, or even damage to your device.
WARNING Do not dispose of unit in fire or water.
- Never attempt to disassemble and reassemble.
- Waste electrical products should not be disposed of with household waste, please recycle where facilities exist.
- Check with your local authority for recycle advice.
- Keep your device and all accessories out of the reach of children and animals.
- Small parts may cause choking or serious injury if swallowed.
- Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 45°C).
- Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device.
- Do not allow your device to get wet-liquids can cause serious damage.
- Do not handle your device with wet hands.