LIQUID EARS HPK13141 True Wireless Bud Earphones User Manual
- June 1, 2024
- Liquid Ears
Table of Contents
LIQUID EARS HPK13141 True Wireless Bud Earphones
Specifications:
- Product Name: True Wireless Bud Style Earphones
- Model Numbers: HPK13141 – HPW13142
- Charging Cable Maximum Load: 5V/1A
Product Overview:
The True Wireless Bud Style Earphones are designed for convenient and high-
quality audio experiences. With multifunction buttons and a charging case,
these earphones offer a seamless user experience.
Product Usage Instructions
Pairing Left and Right Earphones:
Make sure both earphones are fully charged. Remove them from the charging
case simultaneously to automatically pair with each other. Follow the pairing
instructions on your device to connect the earphones.
Maintenance:
To maintain the earphones, avoid using abrasive cleaning solvents and sharp
objects that may cause damage. Keep the earphones away from high temperatures,
dust, humidity, and liquids to ensure longevity.
Auto Power Off:
The earphones will power off automatically if there is no operation for 3
minutes after being removed from the charging case, helping to conserve
battery life.
MONO/STEREO Function:
To use the MONO function, remove one earphone from the charging case. For
STEREO mode, remove the second earphone. To switch back to MONO mode, place
one earphone back in the charging case.
Special Note:
Before initial use, place both earphones in the charging case once and then
remove them to activate the multifunction button feature.
FAQ:
-
Q: Can I use only one earphone at a time?
A: Yes, you can use one earphone in MONO mode for listening to music or taking calls. Remove one earphone from the case to activate this function. -
Q: How do I clean the earphones?
A: Avoid abrasive cleaning solvents. Use a soft, dry cloth to gently clean the earphones. Do not expose them to liquids or high humidity.
Multifunction Buttons
NOTE: Some features may differ pending paired device software versions and platforms.
Play / Pause| Left Earphone (L)
Single Click| Right Earphone (R)
Single Click
---|---|---
Reply/End Calls| Single Click| Single Click
Refuse Calls| Press and Hold| Press and Hold
Previous Track| Double Click|
Next Track| | Double Click
Volume –| Triple Click|
Volume +| | Triple Click
Voice Assistant| Press and Hold for 3 Seconds| Press and Hold for 3 Seconds
Auto Power Off
Earphones will automatically turn off if there is no operation for 3 minutes
after removing from the charging case.
Pairing Left and Right Earphones
If the connection from right to left is lost, place both earphones back in the
charging case. Wait a few seconds and then remove both earphones from the
charging case and they will re-connect automatically. If this procedure does
not work, disconnect the earphones from your device, wait a few minutes, then
reconnect them (both earphones must be placed inside the charging case). For
both procedures it is necessary that the earphones inside the charging case
are charging, make sure that the charging case is sufficiently charged to
complete this function.
Maintenance
Do not use abrasive cleaning solvents to clean the product. Do not touch the
product with any sharp object as this will cause scratching and damage. Please
keep the product away from high-temperature, dust, humidity & liquids.
Product Overview
Specification
- Bluetooth® Version : 5.3
- Driver Size : 8mm
- Earphone Charging Time : 1.5hr
- Charge Case Charging Time : 2hr
- Earphone Battery Type : Li-polymer 3.7V/40mAh
- Charge Case Battery Type : Li-polymer 3.7V/280mAh
- Sensitivity : 103dB ± 3dB
- Frequency Response : 20Hz-20KHz
- Bluetooth® Range : 10m
- Playing Time : 16 Hours including case
- Standby Time : 60hr
- Operation Temperature : 0°-40°C
Charging
Charge the battery to full capacity before first time use. To charge, plug the
charging cable into the product charging port connecting it to a charger/PC
with a USB port (5V, 1A). The blinking light on the front of the charging case
shows the progress. When the light stops blinking, the charging case is fully
charged. Once you place the earphones inside the charging case, the earphones
will automatically charge from the battery inside the case. When the earphones
require charging you will hear a prompt through the earphone speaker and the
earphone light on the case will flash indicating charging is required.
WARNING: The earphones can only be used with the provided charging case!
Turning On and Pairing
Remove the earphones from the charging case and they automatically turn ON.
The earphones must be connected to a device within 3 minutes, otherwise the
earphones will go into power saving mode. To activate the pairing mode again,
simply put the earphones back in the charging case and wait a few seconds
before repeating the above procedure again. Turn ON the Bluetooth on your
device, go to the Bluetooth menu, search for “HPK13141/HPW13142”, select to
pair and connect. You will hear “Connected” sound play through the earphone
when pairing is complete.
Special Note: Before using the earphones for the first time, place both
earphones into the supplied charging case once and then remove them. This will
activate the multifunction button option.
Automatic Reconnection
When the earphones are removed from the case they will automatically turn ON
and sync to each other. If they have previously been paired to a device, they
will automatically re-connect provided it is within range.
MONO/STEREO Function
You can use only one earphone to listen to music and take calls. This function
(MONO function) is available for both earphones. To use this function, remove
one earphone from the charging case. To switch to the STEREO mode, remove the
second earphone at any time. To switch to MONO mode, place one earphone back
into the charging case. Read this user manual before using the product. Keep
the user manual for future reference and include it when passing the product
to third parties. Liquid Ears will not in any way be held responsible for
injury or damage caused to persons or property arising from misuse of the
product.
WARNING: The included charging cable is for use with this product only.
Charging cable maximum load: 5V/1A
Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by The Crest Company is under
licence. Other trademarks and trade names are those of their respective
owners.
WARNING: Do not dispose of unit in fire or water.
- Never attempt to disassemble and reassemble.
- Waste electrical products should not be disposed of with household waste, please recycle where facilities exist.
- Check with your local authority for recycle advice.
- Keep your device and all accessories out of the reach of children and animals.
- Small parts may cause choking or serious injury if swallowed.
- Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 45°C).
- Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device.
- Do not allow your device to get wet—liquids can cause serious damage.
- Do not handle your device with wet hands.