LIQUID EARS HPK13159 Wireless Noise Cancelling Headphones User Guide
- June 1, 2024
- Liquid Ears
Table of Contents
LIQUID EARS HPK13159 Wireless Noise Cancelling Headphones User Guide
Specifications:
Driver Size : 40mm
Impedance: 32 Ohm ± 15%
Sensitivity : 103dB ± 3dB at 1kHz
Frequency Response: 20Hz – 20kHz
Battery Capacity: 400mAh
Play Time : 50 Hours
Charging Time: 2 Hours
Fast Charging Time : 10mins = 8 Hours play time
Standby Time : 400 Hours
Wireless Range: 15m (without obstacles)
Included
1 x Wireless Headphone
1 x USB-C charging cable
1 x 3.5mm Audio cable
1 x Instruction
Overview
-
1. 3.5mm Audio port
-
USB-C charge port
-
Volume-, rewind track
-
MF Button – play/pause, answer/end/ reject call, voice assistant
-
Volume+, next track
-
Power on/off, mode change
-
Microphone
-
LED indicator
Battery Charge
This wireless headphone is powered by a rechargeable Li-ion battery. When the battery is low the headphones will emit a sound to remind you to recharge it.
- Insert supplied USB charging cable into a suitable USB port for charging.
- Connect the USB charging cable with the USB-C port on the headphone.
- The LED indicator turns red to show battery is charging.
- The LED indicator turns off when the battery is fully charged.
- It takes about 2 hours to fully charge the headphone
Fast Charging
When you don’t have time for a full charge, the LE Long Play has a quick
charge capability that provides up to 10 Hours of playtime after just 10
minutes of charging.
Only charge your device with a 5V/1A adaptor. Using other adaptors may either
damage the battery or not charge.
Wireless Pairing
- To enter pairing mode, ensure the headphone is OFF ,then press and hold the power button (6) untilthe LED indicator(8) flashes blue and red,and a voice prompt“ Pairing” can be heard.
- On your device, search for the pairing name:“LE ANC” and once selected the LED indicator willturn off and a voice prompt “Connected” can be heard.
- Once paired,the headphone will automatically re-connect to the same device when switched on again.
Wired Connection
- If you wish to use the headphone in a wired mode,simply connect the supplied 3.5mm Audio cable into the port(1) on the headphone and insertthe other end into a source device.
- To use in a wired mode,you are not required to turn the headphone on, simply controlthe audio via the source device.
Playing Music Wirelessly
- Press MF button (4) to play music. Press again to pause music.
- Press and hold “Volume+” button (5) to skip to next track.
- Press and hold “Volume-” button (3) to rewind track.
- Press “Volume+” button (5) to increase volume, voice prompt can be heard when maximum volume is achieved.
- Press “Volume-” button (3) to decrease volume.
Answer/End Calls
- To answer an incoming call, press MF button (4).
- To end a call, press MF button (4).
- To reject an incoming call, press and hold MF button (4) for 2 seconds .
- To dial last number, double press MF button (4).
- The microphone (7) is located on the headphone.
Voice Assistant
- In a powered on state and not on a call, press and hold the MF button (2) for 2 seconds to activate your connected phone’s voice assistant.
- Once activated, any music playing will pause and you can then communicate with the assistant.
Modes – Gaming/Music
- This headphone is equipped with dual modes – gaming and music.
- To switch between modes double press the power (6) and you will hear a voice prompt signaling which mode you are now in.
- Gaming mode – has a lower latency than music mode.
- Music mode – has a higher focus on sound quality.
ANC – Active Noice Cancellation Mode
- This headphone is equipped with ANC features to enhance the audio experience.To switch between ANC ON and ANC OFF press and hold button 6 until you hear the ANC voice prompt.
Cautions
- Do not put the product in a damp, dusty, smoke or steam environment, or expose to sunlight for extended periods,do notleave in a vehicle for extended time either as it may cause malfunction.
- Use a soft dry cloth to clean the product,do not rub harshly or it may scratch the paint.
- Do not put the headphones in water, they are not waterproof.
- Continuous use at full output may damage hearing.
- Please charge headphone with supplied adaptiveUSBcable, charging with a fast charge cable may cause damage to the battery.
WARNING: The included charging cable is for use with this product only. Charging cable maximum load: 5V/1A
WARNING
- Do not dispose of unit in fire or water.
- Never attempt to disassemble and reassemble.
- Waste electrical products should not be disposed of with household waste, please recycle where facilities exist.
- Check with your local authority for recycle advice.
- Keep your device and all accessories out of the reach of children and animals.
- Small parts may cause choking or serious injury if swallowed .
- Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 45°C).
- Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device.
- Do not allow your device to get wet-liquids can cause serious damage.
- Do not handle your device with wet hands.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>